Counting matching models…
This works well for my PSVR2. There are a few choices for the base that add extra weight in the front to reduce tipping over backwards. See the STL files for the base choices. I printed the simple ‘front bar’ one at first and then the…
Update: V2 is released! Improvements include: Improved/intentional controller mounting spots previous spots to hold controllers were a happy accident Improved cable holder made it shorter, made the securing angle steeper Improved headset…
couple of features charging cable tunnel , you can charge controllers while placing it on the stand print this completely supportless on FDM printer. have fun , i am starting a patreon where u can find my newer designs, please follow me…
Protect PSVR2 USB-C plug and PS5 USB-C socket in case of accidental cable pulling to sides. For initial PS5 variant. Printed from PETG, 0.4mm layer, 15% infill. Any (almost) settings will work. Fusion 360 source included.
Fast 3d scan with Revopoint Pop2 3D scanner, some cleaning, smoothing and polycount reduction to 250k in Zbrush. Better scan to come but already should be enough for some projects. Simply mirror the model for the other controller.
Designed for use with my rig but maybe useful to a desk or other situations. Printing: I used PLA, and printed it the simplest way: pointing straight up with maybe 25% infill. That'll work fine if your printer has good layer adhesion.…
This is an insert for the PSVR2 Sense controller that offers basic parity with the Valve Index Knuckles controller (the controller encases the hand so you can fully open your hand without dropping the controller, this is very helpful for…
Simple yet practical wall stand for the PS5 VR2 Headset. If needed, you can print a second one for rolling the cable. You'll need : 2x M4 Screws. Length depends on your use case. Printing : Print it laying on one of its sides. I recommend…
Cable clip that holds your VR headset cable on your belt. Easy print, no supports needed.
Super simple hook for storing the controllers
All VR lens adapters out there have lens attached completely flat. Actual eye glasses mount lens at a slight angle forming a curved surface. For me, the flat mounted lens cause my peripheral vision to be distorted (straight lines look…
This is a custom design I made for my PSVR Processor Unit. I needed to keep it out of the way while at the same time stop it from flying about while connected to the headset. I have modelled in some pilot holes but if you need to make…
Scan of visor part of PSVR2, scanned with revopoint pop2 and revopoint mini. decimated in meshlab. incomplete , NOT 3d printing ready as not watertight, but might be enough for some projects. better scans might come. If you own a psvr2…
I tried to use my Index controllers with the PSVR2 using space calibrator, but the IR emitting base stations interfere with the IR based camera tracking on the headset, so I made a way to do it natively by attaching a 3.0 Vive Tracker.…
I needed a place to put my PSVR2 away that helped to keep dust off of the lenses. This model also was made so that I could attach it to my Ikea Skadis board. I'm using 8/32" hardware to mount it as I wanted it to be secure.
Gcode files are PLA (I used Overture), .3mm draft, 15% lightning infill (For time/material savings). You will almost definitely need to turn off perimeters if you position on your own bed as well (Gcode should include this off by default)…
These pieces are designed to make it straightforward to attach a Vive DAS to a PSVR2, using M3 nuts/bolts or hot glue/VHB tape. The stock facial interface needs to be unscrewed for the custom interface to take its place, the visor must be…
Printed in PETG. Designed for drywall screws. Adapter slides in and is held firmly by two tabs. Tolerance is tight.
Use TPU The plug should be pressed through (it's separate to remove the need for support) Press the cable into the channel on each side Support should not be needed You could print the main body in PLA/PETG, but the plug really needs to…
Really simple model, easy to print also.
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
Comparing to Quest's controller PSVR2's grip button is very uncomfortable, espesially when you need to long press it to hold something, so I made this raiser to make it easier to press. Attatch to the controller with blue tack. Can be…
I was pretty annoyed with the PSVR2 not having any built in head strap audio, so I picked up a Vive DAS on Black Friday for 16$ and used the headphones for this. I tried to position them so that they float over your ears like the Index.…
Simple yet effective under the desk mount for DC adapter delivered with PSVR2 PC adapter. Snug fit so it will not move easily.
Thinner version of the facial interface replacement by LonnyKThinner version of the facial interface replacement by LonnyK. Gets you closer to the lenses; about 5mm.
Remix of the Playstation VR logo, for the VR2 version (for PS5). To be added to stand models, supports, cases, etc. for the PSVR2.
Remixed for those who would like to mount it to their sim rig. Use 6mm hex bolts.
In this remix more room was added in the spool while also increasing strength at attachment point at base to decrease potential breakage. Height was increased in wire channel to accommodate both the aux plug and earbud wires. Note: photos…
It's recommended to print this flat side down with no supports. Make sure “Bridge counterbore holes” is set to “partially bridged” in Prusa/Bambu/OrcaSlicer so that the bridge layer is printed properly. For other slicers maybe just use…
This model is a stand for the PlayStation VR2 (PSVR2) headset, designed for convenient storage and aesthetic display of the device. The design has been modified to allow mounting on a Skandis board, helping to save space and keep the…
Easy to print, minimal Skadis holder for Playstation PSVR2 to PC adapter
this is a fork of printables.com/model/1507930-psvr2-replacement-facial-interface-with-optional-i i fxxxking hated how the mask clips was designed so silly, because i printed the mask and broke it immediately. so redesigned a bit and made…
Because the original rear wheels of Neato and VR100 are very hard they make a big noise on tiled floor crossing the gaps between the tiles. If you print the attached file with white TPE and replace the hard wheels with the new ones, you…
Will fit either Sense controller, print two! No supports needed! Printed in PLA at .2 structural on a MK4S.
PSVR2 Headset front scan for making custom mounts. Scanned with a Creality CR-Scan Raptor with an accuracy of 0.1mm. It could be more accurate than this, but I ran out of RAM with a 0.02mm settings so that's all I can do. In case you're…
Attach your PSVR2 to the Meta Quest 2 headstrap for next-level comfort! This simple 3D printed adapter securely mounts your Quest 2 onto the Meta Quest 2 headstrap. Designed for the Meta Quest 2 headstrap and PSVR2 Snug, secure fit…
Please look at the original: Playstation VR2 (PSVR2) Headset Stand (updated Mar 4) von psybertech | Kostenloses STL-Modell herunterladen | Printables.com
The design was originally intended for mounting with flat head (chamfered) #6x1" wood screws, however alternatives with solidified, enlarged bases and insets are provided to enable mounting with double-sided tape. Note that the insets on…
This model is a custom-designed holder for PlayStation VR2 controllers, allowing them to be securely mounted on an IKEA Skadis board. The holder keeps the controllers organized, preventing damage and ensuring they are always within reach.…
A very simple model to fix the new PSVR2 adapter below your desk. Screw holes are for 4x16 screws. Anything with a screw head diameter above 6mm should work.
Since the release of the PSVR2 I have been searching for knuckles straps for its controllers, and there have been none,
A vacuum robot is a great thing and ours is so flat, it can even go under the couch. Unfortunately it won't find its way out and will get stuck, so I had to design an extension to the turret, so the safety switch will tell it to turn…
Print two times, one mirrored, for left and right hand side. Should be easy to customize if Headset does not fit. Headset connector just print two times, one mirrored Connector_Ziptie print two times, one mirrored use two zipties (max…
This is a remix of the “PSVR2 IEM/Earbud Adapter” by s16n. Thank you! My version makes a few quality-of-life improvements: Wider cable channel so the earbud cable can loop back and forth up to four times without binding Corrected hole…
simple wallmount for tp-link archer vr2100v
A nightmare to replace as you have to disassemble the entire machine…and Vorwerk did not design this to be disassembled. However, the part works astonishingly well for months now. Saved me 200€ repair cost Printed this in PET-G (solid)
Adapter for PSVR2 wallmount hanger to Kallax
Designed for 1.5" T-Slot extrusion. Required hardware: 4x M8 14mm hex socket head screws (16mm works too, in a pinch) 4x M8 T-nuts 2x M4 16mm - 20mm screws Print the base with supports for the underside. Attach top to base with 2 M4…
Remark on the belt dimension After mounting the belt you must have a very tight fit on the pulley otherwise the motor will skip teeth under load (guess how I know that). With my robot, I ended up switching from the original 49 teeth belt,…
(If you find any of my models for sale online (ebay, amazon, etc) it is not me, i do not sell prints; especially not at those insane prices. They are all listed as non-commercial works. I do not have a patreon or kofi or any donation…
The top strap model remixed from LonnyK's DAS mount, with the strap loop shrunken to better fit the Rift CV1 top strap. Like the original model, the original halo strap must be removed. You will need the same screws attaching the original…
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
Rationale Those replacement rollers are slightly raising the front of the robot and lowering its back so that the main brush gets less friction on the floor. This prevents the brush from getting blocked and the belt to skip steps (can be…
Be sure to take filament shrinkage into account; the model is built with PLA shrinkage in mind.
I had a set of Kiwi clip-on headphones lying around from when I used the Quest 2, so I figured I could put them back to use on my current headset! These press a good bit on your ears, so you get a pretty solid sound from them. To attach…
Assembly Print x6 new flaps upright Pull out the x2 green end caps of the brush Slide the x6 old flaps out Slides the new in place Push the caps back in place (paying attention to the correct orientation: there is a small notch) Print…
A dust cover for your psvr2 PSVR2 Lens Cover
Handle with attachment for vacuum regulator
simple router mount
Needed to design the hooks for the holder to be compatible with Skadis
Ein kleines Plastikteil welches verhindert den VR200 zu aktivieren. Zum Beispiel wenn man ihn versenden möchte - er sich aber nicht durch anstoßen einschalten soll. Einfach einsetzten und mit Tesa Film befestigen. A small plastic part…
A friend of mine uses a PSVR2 for social VR, and was missing out on the newer haptic functionality. I figured actually mounting the motor was a bit more secure than just hot-gluing it on, so I designed this, keeping face tracker…
This is an attachment clip for a Playstation VR2 controller (PSVR2). It allows me to attach things solidly to the controller. I am using it for the purpose of attaching a drumstick to my controller so I can use it as a putter attachment…
This is a battery mount that goes on top of the cinemovr25 whoop frame. It has space for a velcro strap to pass through.
Use VHB tape or similar double-sided adhesive (hi-temp hot glue probably work fine) to bind to the halo. 3M VHB tape is a pressure-activated glue/tape hybrid that can still be removed if needed. Superglue fails to adhere to the…
Summary: A lightweight, super thin, replacement facial interface for the PSVR2. The design is as close to the lenses as is possible, Every user can achieve the max FOV possible. Weight: 28 grams vs 62g on the lonny-k model (including…
Stand to hold the controllers upright with an inset guide channel for the USB-C cables set into the base. Two versions are included + the CAD for both. One circular/spherical & the other rectangular for individual preference. The circular…
Spacers for Drone motors to be used on the cinemovr25 Frame. C-Bearing Space was not enough, so these spacers fix it.
Capture the graceful essence of a feline with this Majestic Longhair Cat sculpture. This 3D model is a masterpiece of digital craftsmanship, blending natural anatomy with stylized, wave-like organic patterns. The design mimics the flowing…
