Counting matching models…
Celebrate the spirit of the open road with this 3D printable STL model of the Kenworth W900 Truck. This iconic semi-truck model is perfect for truck enthusiasts and model builders looking to display a classic piece of American trucking…
This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
You must add spring to make mechanism working.
EN A cover to protect the diopter with iris aperture of the Stgw 90. The carrying strap can remain mounted. Note: Please pay attention to the print orientation (see image 4). DE Eine Abdeckung zum Schutz des Diopters mit Irisblende des…
This is a speed loader for the swiss Sturmgewehr 90/Sig SG550. Its functionality is the same as that of the standard loader. Additionally, it can be clicked onto the side of the magazine for storage. Printing Notes: The tolerances are…
Print in labeled colors, and if you have paint markers, white for the main body. Otherwise use black. GLUE IS REQUIRED FOR ASSEMBLY! Use tree supports touching build plate.
It's split into two pieces so it can be printed without supports. You will need three m3 heat set inserts along with three short m3 screws for mounting the top half. Screw the bracket part in with two #6 coarse threaded screws into the…
Printed in TPU @0.25mm layer height at a 45 degree angle to avoid flat spot. Also used Fuzzy skin Voronoi to approximate the seat plastic texture. Mirror along the X-Axis for left and right side. The bumper slides snuggly at the end of…
This is an Openscad design for mounting a Carpuride W903 Android display on a rearview mirror. The STL files are sized for a late ‘90’s Volkswagen Eurovan mirror. The OpenScad file, while currently sized for this car, can be easily…
This eyelet recess is a replacement part for the W906. Since the recesses tend to rust and the replacement parts are expensive, I have created a cost-effective alternative that any 3D printer owner can print themselves. This model was…
Basic snap on cover for the SW900 ebike display. Just designed for aesthetics and as a bumper as I did not like the original glossy plastic. Note that the retention clip at the top of the case is not really needed to fit the cover on the…
Ersatzteil Sonnenblenden-Scharnier für den Sprinter W906 von 2006-2018.
A mostly perfect copy of the original cleaning and lubricant accessories for Swiss Military Riffle.
biellette de réparation pour bouche de ventilation
Important: you have to relocate the Airbag Sensor to fit these Enclosure. I dont take any responsibility for using this Prints/Parts in your car. You build this at your own risk. The doorpanel has to be modifed. I will ad aditional parts…
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
I print it with Fiberlogy TPU 30D with brim and support. On my prusa mk3s+ edges had problem with adhesion.
Couldn't find a retail option to mount a new fan and everything was made for the Maxxfan Deluxe which is a different size. Couldn't use Butyl tape because of the rough texture of the raptor paint (I don't think so anyway!). This model is…
Basic adapter intended to work with HeyVye's Modular Mounting system - I'm using it with steezebe's CR-10 camera mount on my CR-10 V3. Replaces the mount on a Redragon GW900 webcam leaving you with just the webcam and the top plastic…
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill. Held in place by two screws in the front and two zip ties in the back. The camera is stuck in place by the double sided tape provided by Wolfbox See screenshot for printing…
Leaf guard for TFA 30.3161 Monsun / KW9015 rain gauge.
I thinned the mount to fit under my Robo3D R1+ bed, and widened the bed mounts a bit to make it more centered on my bed (I found in some positions it could slide to it would cause the Y-axis switch not to activate). The plain template…
Mounting plate with 90 degree angle for brick wall or flat roof for TFA 30.3161 Monsun / KW9015 rain gauge. Uses two M3x14 screws and nuts for mounting the sensor. Thx to Eike for helping me drawing the whole thing in Fusion360.
Printed in PLA without supports
I got a Pentax W90, and removed the hot mirror from it. I wanted accurate colors when I wasn't using IR, so a filter ring was needed. This has cutouts for the macro lights, and does not block the view even at it's widest focal length.…
Einfache Diopterschutzkappe für das Stgw90.
Several years ago, I found a Panasonic KX-W900 typewriter and I wanted to restore it. It had its platen roller knob missing, so it was complicated to roll some paper in it. I used FreeCAD to create a replacement knob, so it can fit into…
Celebrate the spirit of the open road with this 3D printable STL model of the Kenworth W900 Truck. This iconic semi-truck model is perfect for truck enthusiasts and model builders looking to display a classic piece of American trucking…
This is a redesign of the awesome truck from ProfessorBoots to look like a Kenworth W900A. I grew up with the movie Smokey and the Bandit and therefore I wanted to have a Kenworth in addition to the Peterbilt. To have the same color…
