1,593 models
At the end of 2017, I found Mike-vom-Mars' hand gestures on Thingiverse (thing:2641409) and decided to use those as a starting point. Some FreeCAD editing was involved; I enlarged the hands so it would fit the 13cm+ body width of my…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
Please click if you appreciate my work :) The German automotive icon – BMW E36 M3 as wall-mounted art. This 3D printable BMW E36 M3 model captures the distinctive body lines, sporty profile, and aggressive style of this classic BMW.…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
I created the Playstation symbol by using the "Negative Volume" function in PrusaSlicer 2.4. Scaled to 50% (orientation: X=-40; Y=0; Z=1.05; and rotated in the appropriate direction). The wall brackets need to be mounted at a distance of…
This is a wall mount Basketball Holder for a Size 7 Basketball. I printed with 50% cubic Subdivision Infill, .2mm layer height and 3 line wall thickness at around a 9 hour print in ASA which seems to be plenty Sturdy. The Bracket is…
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Wallmount to Wall mount to mount the Echo Pop on the wall at a 45 degree angle. Printed in PLA
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
Nothing special - just a quick Design to mount the AMS on the wall. Works fine for me. If there are any Problems, don't hesitate to contact me! Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABS For example…
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
Super easy to use wallmount for the Creality Sonic Pad. Just slide it in with the feet, and you're ready! Printed with 20% infill in PLA. No supports needed
Detailed pike head wallmount decoration
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
A simple holder to store your darts safely on the wall.
Simple centric one-hole, one-screw skadis wallmount. Unkomplizierte Skadis board Montage mit einer Schraube.
A stand for hanging your PS5's Dualsense right in your wall
Xbox controller mount for the honecomb. Print the back on its side it doesnt need supports. print 2 of the pegs they needs two m4x12 screws with nut. Note: took the slope dims for this from chewbuggas wall mount they did that perfect. if…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
The perfect piece for the workshop to keep everything neatly organized. I recommend 3 perimeters, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill. Feel free to check out all my little gadgets for the workshop.
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
Print settings: material PLA/PETG no supports 0,25 layer, infill 10%/15% Aurapol natural filament PLA Na propojení třeba 2ks trubička nebo závitová tyč, nejlépe nerez, 10mm průměr, se závity na koncích(45mm) a 8ks matice M10. Propojení…
Basically the shoe organizer by JGR completely remodeled in FreeCAD that is now Wall mountable an resizable by entering your EU shoe size into the FreeCAD Spreadsheet.
I wanted to make myself a Wallmount, which works for booth pads (125 and 150mm) for the Mirka Deros (550CV/5650CV. This way I can hang the sander no matter what plate diameter I just put on it. Like it? Please don’t forget a like any…
Available Options How to Print Prusa Profile: 0.15mm Quality Other Settings: No support For usage with Wera Kraftform Micro screwdrivers Mounting The Model utilizes 3mm Mounting holes with a 2mm chamfer for screws with a maximum head…
A wall mount that works in almost every orientation. This also works as an under-table mount. this was designed printet for a friend of mine so I don't have that many pictures. I'll print a new version to take more pictures of.
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Stand or Wallmounted Ständer oder Wandhalter
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
A wall mountable case for the ipad mini second gen (A1491) ## Design Holds and iPad mini. Tested with a second generation A1491 but may work with other generations Uses no screws ## Features - Works with 90 degree and straight through…
Hi, this Wallmount replaces the original stand. I printed mine in PETG with 0.2mm layerheight and no supports. I got some problems printing the front of the mount as you can see on the pictures but i fixed it in the uploaded model. The…
Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
Wallmount for Makita DJV181 Jigsaw
English I created a simple wall mount for the Fritz!Box 4060, this uses the original mounting points of the box. If you like the design, feel free to buy me a beer ;-) Versions There are 2 different versions, a smaller version and a…
kompakter Maul/Ringschlüssel Halter. Guter halt. (kann man über Kopf halten)
Wallmount for the Eufy Homebase 3. There are two cutouts for the power cable so you can place the homebase facing left or right.
A simple wall mount for my 125mm exenter sander. Probably will work for other 125mm units as long as they are not too heavy. Feel free to leave a like or make if you like it! Category: Hobby
I loved the simple design from the original, I just wanted to hang my controllers somewhere. Check the Original Files from @ Bengyboo Print 0.2 Layer 4 Walls 20% infill
I simplified this model so that it can be printed without supports and use regular adhesive strips instead of the picture hanging “velcro” ones.
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Description Wall-mount bracket designed specifically for the IMOU Ranger 2 camera. Features a compact design with just enough space to accommodate the network cable. For best results, print with the camera attachment side facing the print…
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
AK47/AK74/AR MAG 3X wallmount Bed organic supports recommended 0,2 layers
The dangling power brick of my fancy 10GBE switch annoyed me, so I designed a wall mount for it. Two countersunk screws are used to screw it into place. I added a version for the UniFi Lite 8 POE's slightly bigger power brick, so you…
Simple bracket for the JK Inverter BMS. Is required twice to attach the BMS at each end to a wall or to the battery hou
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
Simple wall mounted roll holder for wrapping vinyl rolls.
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. This version allows to neatly wrap the DC cord around the 2-layer spool integrated in its base. I made this version…
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
This wallmount allows you to place your LEGO Speedchampions Car's in an 45° degree angle off the wall. It will fit all cars which have the basepart as you see in one of the pictures, like these: Lamborghini Countach #76908, Koenigsegg…
Simple battery wall mount compatible with Cordless Alliance System (CAS) battery. Category: Tool Holders & Boxes
Halter um den Speedport Smart 4 an die Wand anzubringen. Er wird einfach mit dem normalen Fuß in die Halterung geschoben. Bracket for attaching the Speedport Smart 4 to the wall. It is simply pushed into the holder with the normal foot.
This is a Wallmount for the LEGO Concorde. Screw holes are 4.5mm diameter. Nothing else needed to mount. Around 15% infill is enough.
Soporte para filamento en la pared, ahorrando espacio. Necesario un tubo de 25mm de diametro para realizar los apoyos.
Wallmount for Dymo Label Manager for IKEA Skadis. Remixed from these models: https://www.thingiverse.com/thing:3167836/files https://www.prusaprinters.org/de/prints/100876-ikea-skadis-hook/comments
Wallmounted Storage solution for helmet an glasses. Designed for use with a 30mm diameter wooden dowel. I used matte black PLA printed with a 1mm Nozzle and .7 layer height. Prints nicely with a smaller diameter nozzle as well.
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
https://paypal.me/radicalreel Do you know that problem? You want a wall mounted T-handle holder but still be able to easily take the whole set with you? No?.. well I did and made this. Designed for ALDI / Workzone Torx and hex t-handles…
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Swiffer Wetjet Wallmount Just a wallmount for the swiffer wetjet. Nothing fancy, but useful. Print Instructions PLA works just fine for this application 0.2mm layer height 4 perimeters 40% infill
Print in place flexible filament guide. Wallmountable with screws
Eine Wandhalterung für die neueste Fire TV Fernbedienung Version 2024 (Amazon Alexa-Sprachfernbedienung 2024) (siehe Amazon: https://www.amazon.de/dp/B0CK1971VB?ref=ppx_yo2ov_dt_b_fed_asin_title ) Die Wandhalterung unterscheidet sich von…
ENGLISH: A simple UTP cable mount holder (with easy cable dettachable) with screw fixation. Internal diameter: 6.2 mm SPANISH: Un sencillo soporte para cables UTP (con cable fácilmente desmontable) con fijación mediante tornillos.…
a Mercedes-Star-Wallmount or keychain. Perfect as a gift for a Mercedes-Owner.
I created them all by myself from scratch and hope that you like them. Here is a List of all mounts: PAEXS 20 LI A1 - 20V Exzenterschleifer PAEXS 20-Li A1 - Exzenterschleifer PALP 20-Lli B2 PAK 20-Li B2 - 20V Luftpumpe und Kompressor…
Bracket for vertical wall mounting of a 1st generation Alexa. Printed with PLA.
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Wallmount for Hilti Charger C4/36-350 You'll need 4x M4x10 bolts and M4 nuts for the connectors.
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
Wall mounted version of keyboard and mouse holder/stand. The rsdoc file contains models for large and small mouse, published stl, 3mf and gcode are for large mouse variant. No specific printing requirements.
Philips Hue Play Wallmount Great wall mount that mounts to the original hole under the play device. The base is tilted about 65 degrees to give a softer light on the wall than the original. It puts the play 70mm from the wall and attaches…
Hi Here you can find a filament holder for the wall. It is designed for filament rolls with a thickness of approx. 54mm and a hole diameter of 53mm. The two fixing holes for the wall are 32mm ( 64mm ) for Euro screws ( 5mm* 11mm ).…
Wall mount for Bosch e-bike charger 36-2/100-240 mounting by means of 5 countersunk screws.
Keyhanger with 5 hooks for wallmount with Bicycles. Attached to the wall with M3 screws. Easy to print without support.
With only 2 small screws, you can hang your guitar savely in your room with easy access, print it on the top surface and you will need no supportstructure.
Wall bracket for Unifi Flex Mini.
Föhn Wandhalterung: Mit dem Ring auf dem Druckbett drucken Hairdryer Wallmount: Print with the ring on the print bed Category: Household Supplies
You can store your Lite safely on a wall with this device.
Ich benötigte für mein Smarthome-iPad eine passende und unauffällige Wandhalterung. Da ich nichts passendes gefunden habe, ist diese hier entstanden. Passt für ein iPad-Air 1 (A1474 / A1475 / A1476). Gedruckt in weißem eSun PLA, 0,2mm…
Sehr passgenau damit das Board sich nicht leicht verdreht wie es bei den mitgelieferten Befestigungsmöglichkeiten ist
I just changed the great design from Thibaut Martin to be mounted with M3 drywall screws. Thanks a lot for sharing Thibaut! I left plenty of tolerance to cope for different printer accuracies, so M3 drywall screws should fit all the way…
This was a created to hold the stanley FatMax 25' tape measure on the side of my dewalt table saw there is a second variant which is screw mounted to a wall (I used that on the side of my router table). Basically it's a holder that can…
Description: A simple wall mounted holder to display your Joycons. The standard “Joycon_wallmount” is supposed to be glued on to the wall and the “Joycon_wallmount_with_holes” is supposed to be screwed into the wall. Printing: Its very…
einfache, stabile und funktionale Wandhalterung Markierungshilfe für Mitte / horizontale / vertikale Ausrichtung 100% Infill / 0,4mm Düse / 0,2mm Schichtdicke / PLA Schrauben zur Befestigung am Dartboard: 3 Stk. 4x25 Schrauben zur…
Holds Bosch, Milwaukee and Parkside 12V batteries. Takes two 4x35mm screws, assuming 30mm depth wall plugs. Battery clips in for retention. It is possible to pull the battery out without pressing the release since the underside of the…
It is not the best use of space but it looks great in my office/tinkering corner. The size of the Rack on the Photo is in total 126cm wide. Each board is 250x200x18mm. With 250mm boards each Hexagon cell is measures 45cm in height and…
Inspiriert von der Wandhalter Wallmount / Wandhalterung Bosch AL 1830 CV Charger" by vinyli habe ich zuerst den Halter umgezeichnet, da ich Fusion treu bleiben wollte. Hiernach habe ich die Löcher um wenige Millimeter weiter nach außen…
I wanted to mount my U6+ to the wall - but in a horizontal orientation. So I designed this thing. It will be mountable with all included hardware from the U6+.
Wallmount for the One Connect box for the Samsung The Frame 32" Don't know if it fits the one connect for other samsung tv's The Fusion 360 file is attached so you can change it to your needs.
There is a compact version version via this link available ***** Update 12.06.2023************* I recently bought a protective cover for my Kiox 300 . With this cover the Kiox doesn't fit anymore into the first version of the wall mount.…
![[REMIX] - Metabo / CAS battery holder (wallmount)](https://media.printables.com/media/prints/428582/images/3546805_617b3b8a-e2a5-4c02-a0af-5a69dad68dc6/large_display_ca59ce33-c81f-42fc-bf7d-b214923a7a65_428582.jpg)
