Counting matching models…
28/8/23 Added step file for battery holder to aid with remixes 2 versions, a single battery and a triple battery version. Prints vertically, no supports Important note on scaling As the fit of the battery is so precise I would advise…
Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course. The following Makita tools have been tested so far in the 40mm version: Makita DTD171 Makita DDF484…
If you like my work and want to support me bringing you new content please consider supporting me on Thangs Pre-Supported .stl and .lys files for resin included by Charro Zuck support services. You will find 3 folders. One for Resin with…
These are tool mounts for DeWalt cordless tools. They can be screwed into the underside of a shelf and fit to the battery female end of the tool. Print standing up. I use 3 walls, 20% infill, and no supports.
Adapter folded from two parts to limit the use of supports DeWalt battery adapter You will need: 5x M3 - 15mm screws 2x male connectors and wires
A Dewalt tool holder that should work with most Dewalt tools that use an XR battery. This holder replaces the battery in the tool so that it can be mounted to a wall for easy and convenient storage. I currently use this to mount my 4"…
This is a challenge I gave myself. The goal was to design from scratch a replcia of The Deliverer from Fallout 4. The replica ressembles a Walther PPK with some minor difference. I tried to stay faithful to its shape while integrating…
Universal Cordless Impact Driver/Drill Holder A universal cordless Impact Driver/Drill Holder meant to organize your workbench as well as make it more ergonomic and easier to use. Front extrusion allows for it do double as a bottle…
This DeWalt 20V battery holder mounts to the wall and positions the batteries horizontally at a slightly upward angle. This allows for the batteries to be stored closer together than the traditional vertical holders. Other battery…
A holder for DeWalt devices attached to the battery with an additional lever to prevent spontaneous falling out
Simplified version of the Dewalt Battery Holder by maglub. No need for the battery to lock when hanging the battery on the wall. Print Settings Printer: C3Dt/xcy Rafts: No Supports: No Resolution: 0.3 Infill: 20% Filament: GreenGate PETG…
DeWalt Power Tool Battery Holder This holder is designed to hold DeWalt 20v Batteries. Designed based on a 3D scan of the DeWalt Battery and refined for a snug fit. Print instructions HARDWARE • Screws: x2 wood self tapping countersunk…
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
I used .4 Nozzle with Bambu Lab PLA (Yellow). 15% Infill and support. For best result print the part with the flat back face oriented down. If you like this design and would like to support my work, please share and consider donating to…
This 1/4" Hex bit holder is attached to the opposite side of the drill or impact driver than the belt clip. This device fits a Dewalt DCF887 impact driver and DCD996 hammer drill. I'm sure it would fit most Dewalt 20v MAX drills/impact…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
Alternative sawdust extraction adapter for the DeWalt DCW600, DCW604, D26200, DWP611 milling machine. This adapter has the huge advantage that it does not have to be screwed onto the milling machine, but just clicks. In addition, it has a…
I've been using the DeWalt DCBL722 20V leaf blower now for better part of a year. I was always disappointed it only ever came with the one nozzle on the end of the blower called a “concentrator” but it's really more of a diffuser. I was…
DeWalt AirLock compatible twist-lock dust collector fitting I like DeWalt tools well enough and own a bunch, but like every other tool vendor their approach to dust collector connections is psychotic. I'm not at all convinced that any two…
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
Carry 6 DEWALT 20v batteries to and from the job site with this sturdy carrier. Printed in Creality PETG with 10% infill and 3 walls. Just a few supports suggested for the handle.
How to use the jig: 1) set the slider to the desired thickness 2) set it slightly before the blade 3) move the parallel guide until the wood touches the bearing, then fix it in position 4) perform the cut 5) repeat step 3) and 4)…
This is a zero clearance insert for Dewalt miter saws. I modeled it from the insert on my own saw wich is a DW716 (12inch, dual bevel, NON sliding) from what I can tell from the replacement inserts on amazon, this will fit models:…
A set of saw blade holders for all common electrical jigsaws. The lids clip on and will stay on even if you turn the holder upside down and shake hard. Your saws won't fall out even if you toss your toolbox around. Chamfers make inserting…
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
A simple battery cradle with a color change to pop out the brand name. Can be standing on your bench or mounted on the wall. The infill is strategically modified to withstand use and mounting. Open hex pattern allows you to press and see…
I have been fascinated by stealth, tumblehome ship designs, of which the Zumwalt-class destroyer is one. I couldn't find a model of one that seemed to be suitable for FDM printing, so I figured I would give it a shot myself. The model…
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here's a minimalist wall mount…
I used 25% infill with the print standing up. PETG recommended. 4 hour print time. No brim needed.
This is a remix of "1/4" hex bit holder for a DeWalt drill" by Lowell Alleman. I wanted to be able to hold more than one hex bit on the side of my impact driver at a time, so I made a double barrel bit holder. I used the same M3x10 screw…
I know there are a number of holders available for the DeWalt batteries but I decided to design/print my own after seeing complaints of “too tight” along with not seeing options for both the 12V and 20V battery sizes, not to mention the…
I found a well designed jig on the internet but because I already spent too much money on jigs and tools I built one myself. For your convenience I've included all Fusion 360 files so you can make changes to the design. To make…
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
Bitholder for DeWalt cordless drills and impact drivers. At least fits DCD796. Screw to secure is standard dewalt screw (M3 10mm). Printed in PETG, 40% grid infill with auto support.
Pretty self explanatory. I was getting tired of carrying around a small box full of drill & driver bits, so I decided to make an accessory that clips easily onto my DeWalt DCD999 drill/driver. Presumably it will clip onto some of DeWalt's…
I made this mating connector for a Dewalt 20V battery pack so I could use it in a battery-powered project. For printability I split it into two halves and glued them together. I used ¼" spade terminals as the contacts, which can be glued…
This DeWalt battery mount uses a single screw to mount to any of your desired surfaces! It prints without support material, and is symmetrical so you can install it in either direction. If you want to support me or get a commercial…
This is a remix of two designs to get the best of both for my DeWalt Table saw with metric nuts and bolts. Following Designs are used: Sliding Block: www.thingiverse.com/thing:3973092 The block was dapted to fit for the DeWalt 7491 & 7492…
Inspired by https://www.printables.com/model/519833-rugged-makita-battery-holder/remixes
Lets hang your DeWALT / Makita drill gun under your shelf! Designed for DeWALT DCD791, but it works also with Makita 6270D and probably with other similar models from different brands. Be sure to check also my other DeWalt hanger holders:…
Just squeeze router on router base. Print with less support possible!
DeWalt 18V XR Battery (Transport) Cover/ Holder (With a hole for a hanging loop). Print settings: 🖨⚙ Material: PLA Layer height: 0.2 Infill: 25% Support: NO Print speed: 30mm/s ⚠ (Notes: The cover is printed in portrait. Also works with…
PLA is fine for indoor storage.
I redesigned this throat plate eliminating the screw holes and lock (lock is not necessary to have). I have fine tuned the bottom feet to be the exact height to level the plate with the table saw top (you can slightly sand these feet if a…
Dewalt battery holder or adapter. You could use this just as a mountable holder or if you insert a .7 inch strip of .032 brass you can connect to the battery. A small compartment is made for a fuse, reverse voltage protection or what you…
Simple attachment for the Dewalt 735 to get a 4"/100mm hose up and out of the way of boards exiting the rear of the planer! Simply push in the button on the stock port, rotate and remove the original stock black port. Install this…
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
The lift fits on a DeWalt laser DCE089D1G. The laser beam can reach a height of 32 cm from the ground. The lift itself c
This model is inspired by the design by USSA Design (watch their video here: https://www.youtube.com/watch?v=2JYTYOJt_m4). I made my own so it worked with my Dewalt DCW604 router. You will need to print 4x support screw 4x support screw…
Adapter allowing DeWalt's DCW210B sander (or any other tool compatible with the DWV9000 adapter) to a Festool 27mm dust extractor hose, with or without the twist-lock mechanisms each connector allows. Updates: 2025-09-21 Increase…
DeWalt battery holder that mounts to a 1/4" pegboard and takes two standard size 20V (AKA 18V in some parts of the world, but using misleading marketing is the norm in North America) DeWalt batteries. I wanted a sideways mount so that I…
Many wall mounted brackets and holders already exist for DeWalt's iconic 20 volt batteries but after having looked at many designs I found them all lacking in various ways so I decided to make my own. Its main virtue is that it uses under…
So i wanted to make various ways to mount Dewalt Battery Chargers (DCB112/DCB115 and the DCB118) The DCB112 and DCB115 screws are 114.3mm apart, and the DCB118 is 133.4mm First option, is a simple 2mm thick alignment jig. you can print…
Cordless tool battery adapter. Dewalt Battery to Makita skin tools Extra hardware spade connectors wire 9mm female terminal fuse terminal M3 x10mm bolt & Hex nut Prep spade connectors like this, flatten out the shoulders if you can…
If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2. Please support my work by subscribing to my youtube channel www.youtube.com/wekster
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
A simple wedge to help mitigate the slight tipping effect on DeWalt Tough System 2.0 toolboxes when you stack them together. If anyone knows who makes a yellow that best matched the DeWalt yellow please let me know ☺
I remixed Ashf144's file on Thingiverse to nearly eliminate the need for supports and improve the overall look (in my opinion). I also added a bevel where the battery clip goes to help it slide into place better and more easily. The only…
EXPAND YOUR CORDLESS WORKSHOP TOOLKIT! Check out our other tools: - 100W USB-C Power Bank Adapter — Fast-charge laptops, phones, & gear on the go. - Portable Soldering Station — Cordless soldering station for field repairs & benchtop…
A 90° degree transition from the Dewalt DW735 dust collection port to 4". Here I'm using a Rockler quick connect but it'll also work fine with a 4" flex hose and it may work with various other fittings but I haven't verified this. The…
Liked the drawer unit but thought the hexagon pattern adds some flavour to it and saves a tonne of filament.(50% off shell,25% off drawers). I added a slight angle to feet so it stops harassing me for supports. I printed it flat on its…
Dewalt Tool and Battery Holders
I printed upright without supports using PLA+ 3 walls, 3 top and bottom layers with 20% infill.
This sturdy wall mount is designed specifically for DeWalt drills, providing a reliable and space-saving storage solution. Designed for durability, it securely holds your drills while ensuring they are easily accessible whenever needed.…
An adapter between a DeWalt orbital sander and a shop-vac hose. Specifically designed to work with a DWE6421. There are two versions. One for a Shop-Vac hose that is ~1 1/8" OD, and one for a DeWalt hose that is ~1 7/8" diameter. F3D…
Modified handle for Walther GSP with grip screws on the sides. Large and Medium size - shelf fits both. The shelf requires an M6x20 (max 24mm) HEX bolt, nut, and washer. For left-handed, just mirror. I tested that it fits mirrored. Works…
Walter White and Heisenberg Hat. With Added Scalp resized to help create boolean and design your own hat. Use the scalp ( walterwhitescalpforhatboolean ) to remove the appropriate space in your hat so it will fit. Baseball cap, French…
My Dewalt Stick Vacuum is quickly becoming my favorite tool. SUPER cheap compared to a Dyson. I already have several Dewalt 20v batteries, and it's right at home in the garage for a quick tidy. Only problem was: there was no wall mount…
This is an adapter to attach a vacuum to Dewalt orbital sanders. It isn't mounted using Dewalt's system instead it's just a friction fit. I've designed it for a couple different sizes of vacuum hoses. you will need to measure your…
Printed adapters for interfacing with the top of Dewalt toughsystem 2.0 boxes. Worksurface was cnc routed from ½" MDF by Sendcutsend.com (approximately $35 each at the time). Used these threaded inserts from the bottom side to attach…
These are a remix/inspired by the DeWalt Tough System boxes on here. These are for the Deep Pro Organizer model #DWST14825 although they may work on other models. I've included replacement models for the factory full and half size cups…
Based on an old model which I downloaded to hold a Dewalt Drill, I added a tab off to the side to hold the multi tool adapter allowing the use of all blade types. The tab means that the little washer and bolt won't get lost without…
This wall mount is for Dewalt drill style form factors. I've tested it with the Impact, Drill, and Heat gun. In theory it should also work for the wire stripper, larger impact, caulking gun and spotting light. However I don't have those…
i made a hanger/holder for my dewalt DCS391 circular saw it has 15% infill and 4 perimeters just retract the blade up as high as it goes and place it in the hanger whilst pulling the guard back
Because I broke my tablesaw insert plate, I needed to design this replacement part. I made it as accurate as possible and in two parts so it fits on the build plate. It is not a ‘zero clearance’ version, but as the pictures show a…
Remixed this holder so the batteries are closer together. It fits my french cleat style hanger system better.
A wall hanger for DCBL722
Basic mount. On the top mount the word "UP" should be mounted so it can be read properly. The clamps have a rounded corner side and a chamfered side, they match the mount part. You will need to rotate the spindle lock to make the mount…
Replica of original DeWalt 25mm bit holder for Tough case System
I needed some better organization for all my stuff used often or just occasionally for 3D printing and Arduino making. As soon as I saw the DeWalt TSTAK double drawers I knew those were for me and I was lucky enough to run across…
This Dewalt Track Saw Adapter Guide allows you to use your 20v 6-½ in cordless saw with the full size tracks! *Use at your own risk* This design prevents the blade guard from recoiling to cover the blade. Also, typical track saws are…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Wallmount for DeWalt DCS356 Oscillating tool
tool mount for 20 volt dewalt tools, the spacer block gives enough room to mount tools with belt clips. supports recomended Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: .2mm Infill: 20%…
I printed in PETG at 0.2mm and used supports only on the hex overhangs. I've uploaded the 3mf file with my exact settings and supports already painted on. (When PrusaSlicer adds Organic Supports, I'll be sure to add a version for that…
Gun Stand for Walther PDP As I was not able to find perfect stand for my Walther PDP, I decide to design my own. Its perfectly fitting when printed with PLA. You can also try PETG. Features : Minimalistic design (fits most Gun Safes) Easy…
Needs printing with supports.
Walt Disney Pictures logo in 3D. 5mm high.
Logos for Ridgid, Craftsman, DeWalt, and Bosch Slice with .20mm QUALITY or SPEED and you shouldn't have any problems. If you need help with inserting color changes into the slicer, let me know and I'll show you how to have PrusaSlicer do…
This is a remix of a very nice design, but updated to improve on a few things: Mounting tabs shortened by ~1mm to fit the DCD805/DCD800 (and possibly other newer model drills/drivers). Should still fit older designs. Magnets mount via…
Link zum OSVac System: https://ossso.de/osvac/ Adapter für die Tischkreissäge DeWalt DWE 7492 um diese mit dem OSVac System zu verbinden. An dem Adapter wird auch gleich die Absaugung für die obere Abdeckung angeschlossen. Druckdaten:…
Dewalt Battery to Dyson V6 - adaptor Version 2 -- https://www.printables.com/model/1897716-dewalt-battery-to-dyson-v6-adaptor-_-version-2 No soldering needed Requirements SP0702 switch…
Tool mount for DeWalt power tools, both the 18V and 20V tools fit. Great combination with the mount for DeWalt batteries . Re-upload from Thingiverse because there wasn't a suitable mount for my use case. Printing instructions: Layer…
Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…
Here's a custom gridfinity baseplate for the Craftsman Versastack and Dewalt TSTACK double drawers. I provided STL that are split up into quadrants and a full plate if you have a large printer.
Marginally adapted the Featherboard. Created a new miter runner which is optimized for DeWalt 7492, based on my other design, using M5 nuts. Used my standard M5 star knob Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
UPDATE: All new files plus 62 more sizes are now posted on MakerWorld.com . Join me over there and leave a 'Boost' if you find these helpful! Unable to print? Visit my Etsy or eBay links to purchase the prints instead! — — — — — — — — — —…
