Search results: wav

Baby Dragon Waving Keychain

Easy to make cute baby Dragon waving keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Ocean Wave Picture Holder ( 4in X 6in ) - spiral vase print

The Ocean Wave Picture Holder is ideal for showcasing a 4in X 6in beach photo or a child's first surfing success. The 4in X 6in photo can either be placed directly in the wave, or attached to the optional simple frame print and then…

Wave Shelf

A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…

Wavey coasters

Some coaster designs perfect for anything you need a cover under. Should it be a mug, a hot plate or anything else. They are simple flat designs just extruded upwards so no supports are needed. If you are having trouble getting the small…

Beer Nukatap tap handle with Waveshare 2.7" e-ink display

Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle

Wavy Vase | Modern and Unique Home Decor

Exclusive Commercial License on Patreon: For those looking to turn their prints into profits, I offer a Commercial License on my Patreon page. By subscribing, you gain the right to sell the physical prints without sharing the digital…

Yamaha Superjet/Waverunner Fire Extinguisher Cap

printed in PETG & TPU not 100% Watertight but it has a decent fit i uploaded the f3d file so if you edit it to be watertight may share a remix of this :)

Lightwave Flashlight Replacement Part

This replaces an older Lightwave flashlight part that has a button and holds the LEDs. The original part was cracked. This happened on three flashlights. With these new parts, three flashlights have been restored. The original electronics…

Waveshare OV5640 USB camera case/magnetic mount

Model have 8 slots for 3x1,5mm circular neodymium magnets(press fitted). 2 parts of the case are held together with 3 M2x10 screws and M2 heat set inserts (3,5mm OD, 3mm height).

Microwave Oven Door Opening Button

Microwave Oven Door Opening Button for GODDESS MOE-717 type oven. Original button was with slanted edge, this model is flat to avoid supports. Printed with Spectrum PLA.

Escutcheon and Grommet for Pepwave mimo antenna wires

Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV

Wavy Pencil Holder - Vase mode

This model is design to be printed using a 0.6mm nozzle (0.4mm should be fine) in vase mode. The print above is made from Prusament PLA Gentleman Grey Recommended settings - Material : PLA / PETG - Vase mode - Layer height : 0.2 - 0.4 mm…

Lithophane Moon Lamp with Wavy Stand

I had adjusted/remixed this model to max out the settings on an AnkerMake M5 Printer. The lamp itself couldn't be any bigger due to the constraints of the printer, but it's still just about the perfect size. The adapter for the lamp was…

Print-in-place, Wavy design Box

Print 3+ perimeters, ~24%+ infill. file sizes now smaller **added plain, untextured version and version with no text.

Modern Wavy Vase

Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…

Waving Groot

Print Time 91 Hours. 20 cm height 0.4 nozzle. Easywood Coconut filament 0.15 layer height Slicer layers used to set more quality. Easywood feels like real wood and it even smells like it :-) Very cool filament. Got the model from Byambaa…

Self-Draining Sponge Holder | Wave Drip Tray

🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…

great wave of kokanow

Hey everyone, first of all, it would mean a lot to me if you could download my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are…

"Waves" Designer Lamp

Designer-Esque fully 3D-printable Vasemode Lamp Design The Lampshade and the base thread into each other for a seamless and sturdy appearance. Although it is designed to fit the Bambu Labs “LED Lamp Kit” you can easily modify the Base to…

wavy planter · wrap around plate

wavy planter with wrap-around plate modern minimalist planter design with wavy pattern that sits elevated in a wrap-around plate full dimensions in mm > x: 110 · y: 110 · z: 100 included are the profiles at full size and 85% size, for…

Waverrior - 3D Shoes

Waverrior - 3D Shoes by Dhafinrezky on Thingiverse

Wave Puzzle 7 (Remixed)

Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…

Wavy Pencil Holder (vase mode)

A Pencil Holder with a wavy texture, designed to be printed in vase mode. Print time: 1 - 2 hours at 100% scale (depending on settings) Dimensions: 6 x 9 cm (diameter x height) If you have questions, feel free to contact me. Happy…

The Great Wave [Framed] - Bookmark

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon "The Great Wave [Framed]" captures the power and beauty of the ocean in a sleek and stylish bookmark. 🌊✨ Inspired by something…

Pendulum Wave Toy with 3 pendula sets

A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…

Self-Draining Sponge Holder V2 | Wave Drip Tray

BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…

Minimalist "Dolphin on Wave" Statue

Minimalist “Dolphin on Wave” Statue This elegant statue captures a dolphin in a dynamic jumping pose, gracefully balanced as if touching the wave below. The sleek silhouette, with expressive lines of the fins and tail, harmonizes with the…

Bluey Sitting, and Standing and Waving Models

I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.

Great Wave off Kanagawa

Full credit for the STL goes to 3_D_M_A on Thingiverse . I simply took the original and sliced it up with the M600 command to accommodate color changes easily. People asked for it so I'm posting it here on PrusaPrinters since the file is…

Great Wave off Kanagawa - Multi-colored for AMS

This was painted in Bambu Slicer for the AMS with four colors. Rather than just painting each layer a different color, I tried to match the original print as much as possible, including painting on some details on a few layers. I painted…

Finger Surfboard! Ride the air waves out of your car. [FlyBoard 1.0]

Version 2 now availiable!: https://www.printables.com/model/254313-finger-surfboard-car-window-finger-surfboard-flybo Have you ever put your arm out of you car window when driving fast in order to ride the waves? Now, you can take your…

Parametric Copper Waves Plant pot and Planter - Vase mode design

A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…

Slide Shoes | Fully 3D Printed TPU | Wavy Sole

Fully 3d printed slide shoes , remixed from MakerVerse Designs printed with TPU (I used eSun eTPU-95A Rainbow ) probably TPU 90a or so is more comfortable, but also more difficult to print My print settings: Infill: 10% Infill Pattern:…

Wavy bowl

Hi! This is a procedurally generated shape extruded as a nice bowl. Print in spiral/vase mode Made using Processing. The geometry shows some 'glitchs' on top and bottom layer but don't worry, it can slice well. The pictures are not…

Benchy Wave

This is a stand for 3dbenchy. Print Settings Supports: No Layer Height: 0.2mm Infill Density: 20%

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Waveshare 7" HDMI LCD (H) Case

(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…

Wavy stand (smoother version)

This is a remix of the wavy stand with smoother edges.

Pendulum Wave

Pendulum Wave to build and play with - Watch the video to see it in action: I also have an instructable which tells you how to create/design the pendulum wave and how to build it after printing. Any questions? Let me know :)

Wave Wall Art

It's intended to have 20mm space inbetween each part. The Wave Wall Art Spacer.3mf file can be very helpful when mounting to make sure the spaces are equal. I recommend that you print 2 of the spacers so you can have on on the bottom and…

Wave Lamp

Lamp shade with a single wave design patterned around a cylinder This design includes pieces that can be used as a - Pendant Lamp using the shade as is. Ceiling Lamp using the included fitter end adaptor to attach to lamp fitters. Table…

Wave Coasters

A calming wave pattern, shaped into a functional coaster set. Three manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Infill: 100% Color Changes: Start with Blue (Polymaker Polylite…

wave phone holder

print this model with pla+

Wavy Dual-Bay Tea Bag Dispenser & Organizer

Keep your kitchen counter or coffee station organized with this modern Dual-Bay Tea Bag Dispenser ! Featuring an organic wavy exterior design, this holder turns everyday kitchen storage into an aesthetic display piece. The twin-slot…

Wave Coffee Tamper - Gift idea

Transforms freshly ground coffee into a mini zen garden. I have made several sizes available: Ø 59, 57, 53, 51, and 49 mm. A simple and thoughtful gift for coffee lovers. If you’d like to support my work, leaving a ♡ like ♥ or even buying…

Milwaukee Shockwave box holder

Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards

Waveshare 7" HDMI LCD (C) Case

(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…

Parabolic Wave Grid Panel (#1)

The Parabolic Wave Grid Panel #1 features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament, color-shift pigments,…

Book Stand "Wave"

A minimalistic book stand that fits into most interiors. It can of course be used as a tablet or e-reader stand. Print instructions I have included 3mf for the MK3s and also one version for the MINI that is made a bit smaller to fit the…

Zen Wave Vase

The Zen Wave Vase is a seamless blend of nature’s tranquility and modern artistry. Its flowing, wave-like textures create a sense of movement and balance, evoking the gentle ripples of water or the soft curves of wind-sculpted sand dunes.…

Stacked wave spring

Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…

Minimalist "Wavy Heart" Phone Stand

About the design: This minimalist smartphone stand balances modern functional art with practicality. Its side profile forms a subtle heart shape, while the construction-resembling merged parallel tubes-gives it a unique, modern aesthetic.…

⌇⌇⌇ Mesmerizing Vase Set - Wavy

Get the whole set! > https://www.printables.com/@TripleGWorkshop/collections/655985

RGB Wave Lamp Yeah! Remix

This is a beautiful mood light based on a RGB LED strip and a ESP8266 as controller. https://www.youtube.com/watch?v=rVWFDmi\_Bek Lamp Shade The shade is a remix of Wave Lamp Yeah! by brico3d. It has been scaled to 140% and oriented…

Helical waves lamp shade

This geometry was designed to fit a leftover socket, which was missing a lampshade. It might fit other lamp sockets as well. If you intend to use the geometry as a vase, there is also a version with a mounting hole included. Geometry was…

Wavy decorate ribs shelf

The wavy decorate shelf is 71cm wide (28in) and can hold up to 5Kg securely. Installation notes: 1. All 6 pieces has their part name engraved in the back 2. Start with the ‘left bottom’ part 3. Connect ‘left middle’ and ‘left right’ parts…

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

Gradiant wavy dildo

Silica gel container - Fast Print - Wavy surface

I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…

Wavy design Nespresso capsule holder & organizer

This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…

wavy vase · wrap around plate

wavy vase with wrap-around plate modern minimalist vase design with wavy pattern that sits elevated in a wrap-around plate this vase was designed as a companion to the wavy planter · wrap around plate dimensions in mm > x: 110 · y: 110 ·…

Wavepattern Coaster

Coaster with a japanese wave pattern loosely based on the idea from https://www.thingiverse.com/thing:4823069 Put a color change in at 2.00 and 3.80 to use different colors. If you use Octogram Spiral as the top and bottom fill pattern…

Wave Vase – Decorative Wavy Vase | Modern & Scandinavian Style

The Wave Vase is a decorative vase featuring a fluid, layered wave design , created to bring a touch of modern elegance and Scandinavian style to any interior. Fully modeled in Blender , this vase blends organic shapes with controlled…

Dummy 13 skin: Soundwave

It's been quite some time since I've remixed a Lucky 13 toys model. Soundwave is a character that I originally wanted to remix for Lucky 13 but I always seemed to have something else on the go, so I'm happy to have finally found time for…

Waving Baby Groot Air Plant

Get an air plant and give Groot some cool hair

IKEA SKÅDIS Marker & Pencil Organizer – Wave Holder

A compact wall-mounted organizer for markers, pencils, pens and other cylindrical tools , designed specifically for the IKEA SKÅDIS pegboard. The wave-shaped compartments keep your tools organized, visible and easy to access. Manually…

wave rail for gravitrax

this amazingly fun addon for gravitrax adds a fun new twist to your existing tracks. it suddenly drops and then comes right back up, it incredibly satisfying & smooth!

wavy cotton swab / q-tip travel box

A slightly rounded small box with some ripple wave pattern (with some Zen garden vibes) for cotton swabs, e.g. for travel, in multiple sizes. Shown is the 30mm version, it holds ~16 swabs (19 in the image). This model comes in several…

Wavy Nested Fidget

I went for a visually interesting wavy style to this fidget, which made it much more difficult to design than my other hexagon fidgets. These segments gradually morph from eight rounded waves on the outside to octagons at the center,…

Wavetable Desktop Speaker Stand

Overview. Wavetable is a customizable, 3D printed speaker stand for your desktop. Adjustable for height, width, tilt angle and more. The cantilevered design allows you to partially reuse the negative space below your speaker. Despite the…

Leatherman Wave Holster - Delux

This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…

TreeWave Photo Holder

A minimalist 3D-printed photo holder shaped like a flowing Christmas tree silhouette. Its smooth wave design elegantly supports your favorite memories, blending festive charm with modern décor. Perfect for displaying Polaroids or small…

MMwave Multi Sensor fixtSE LD2450

This is a redesign based on the idea and software from Ultimate ESPHome DIY Smart Sensor | fixtSE The individual sensors are clipped in neatly and are not loose in the housing. Printed with PLA, 15 % infill. Electronics used: ESP32 30 PIN…

Book Stand "Wave" (redesigned)

This model was redesigned using FreeCAD. Added features: - higher front part holding the book open - cuts for better stability Can be printed quite well without supports with 3 perimeters of 0.3 layer height.

Wavy Dildo

Nerf Elite 2.0 Shockwave Extend

A NERF silencer modeled for my son's Elite 2.0. It can probably fit other models. It should be printed as it comes without support.

Laser visualizer of sound waves

Laser visualizer of sound waves Sound propagates as mechanical waves through air molecules. This device contains a rubber membrane that vibrates in response to sound waves. On the membrane is a small mirror, onto which a laser is…

Leatherman Toothpick for wave/charge/surge

A little toothpick which slots in the pocket clip slot of the leatherman tools such as the wave, charge or surge. Print in layer thickness between 0.1 and 0.2mm for the best results use thinner layers. Use more than 3 walls so it will be…

Wavy Plant pot and Planter - Vase mode design

A new plant pot inspired by wave patterns. Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this filament and we can…

Apollo Automation MSR-2 mmWave CO2 Multisensor

https://apolloautomation.com/products/msr-2 The ball mount is a remix of: https://www.thingiverse.com/thing:67911 from Gyrobot

WAVY flowerpot

Hi, A part of my wavy collection, this plant pot is a clean and minimalist way to present your succulents and small plants. Best printed out of petg or other watertight material. This is an outer pot without drainage holes, meant to be…

WaveShare 7.5" e-Paper case - symmetrical borders

WaveShare 7.5" e-Paper case - symmetrical and without holes on the outside. Note: There is a new variant available now too. Check it out here: https://www.printables.com/model/1400457-school-timetable-with-epaper-display Features: For my…

MTG Card Wave Deck Box

This is an easy to print and strong deck box that fits 100+ sleeved cards. Made for Magic The Gathering commander decks but these could easily be used for anything else. Print each half in different colours to mix and match designs. The…

DOOD! Waveshare RP2040-Zero super slim case!

This is a super slim case for the Waveshare RP2040 Zero. Just enough to protect without bulk. Hope you Like it! I wanted to have access to the buttons, USB C, and Neopixel but still protect it when I toss it in my work bag with other…

Neowave - RGB WiFi Moodlamp

The lamp is mostly 3D printed, and is easy to assemble. It uses an array of WS2812B individual addressable RGB LEDs, which gives it the ability to not only show every color, but also in different effects, like simulating a fire. All of…

Gridfinity Socket Organization for Milwaukee Shockwave 3/8"

This is an 8 piece Gridfinity set for organizing the Milwaukee Shockwave impact socket set. It may or may not fit other brands of sockets.

Wave

Based on a Hokusai painting

Lego Compatible (95225.dat) Minifig Hair Long Wavy with Center Part

This model is compatible with the lego system.

Great Wave

I don't own this picture, you don't either. Don't sell these, for personal use only . The Great Wave off Kanagawa (Japanese: 神奈川沖浪裏, Hepburn: Kanagawa-oki Nami Ura, lit. 'Under the Wave off Kanagawa')[a] is a woodblock print by Japanese…

Cute Waving Ghost Bookmark

Cute little Waving Ghost Bookmark that will keep track of your reading progress for you. The shown bookmarks were printed downscaled with 75% for x and y and 50% of the original z height, but it should scale to about any size. Happy…

Adjustable Wireless charging dock / Ikea Livboj / Powerwave / Anker / Nillkin

This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…

Elegant Koi Fish Statue – Flowing Wave Base

Capture the essence of calm and fluidity with this stunning Koi Fish Sculpture leaping from stylized waves. Perfect as a zen desk ornament, home decor piece, or a standout collectible, this model brings grace and motion into 3D form.…

Benchy at Sea Wave Display

Copying this model over from cults3d: https://cults3d.com/:202786

LCM Monitor Speaker - 40Hz waveguide - Bluetooth - DSP

LCM Nearfield monitor speaker This is a near field mini-monitor, designed for excellent bass response, and intended for use at a desk or console. They are suitable for desktop, shelf, or wall mounting and optimized for small to medium…

The Great Benchy Wave

The Great Wave off Kanagawa bears down on a hapless 3DBenchy. Will our plucky test object ride the wave or be smashed to smithereens (*layer adhesion may be a factor)? This 3DBenchy display stand is designed to be printed in two colors:…

Waves lamp

Waves lamp hood Simple but stylish lamp hood for standard fittings (like ikea etc). The lamp_top can be clamped between the hood and fitting. I printed the hood with an 1.8mm nozzle with transparent PETG and the top from wood filament.…

Skeleton Waveguide Subwoofer Speaker - (Fusion 360 archive included)

A remix of Hexibase's subwoofer designed for clear side panels, so the cool waveguide is visible. It would also suit wooden sides. It's smaller than the Hexibase version, so it will print on a 19cm x 19cm print bed. I kept exactly the…

"Wave" Vase & Planter

A traditional seigaiha inspired vase & planter set , this motif, also know as , is meant to represent the blue sea and its waves. I wanted to see if I could create a 3D version of this traditional japanese motif and make it printable in…

Wave Art Planter

A modern, bowl-shaped planter design with a curved wave pattern. Might need some support material for the bottom curve. Support If you'd like to support me for the 3D models I distribute for free, you can use my AliExpress affiliate link:…

Wave Bookmarks

Catch a wave between the pages. No AMS/MMU required, only two color changes. Print Settings: Layer height: 0.08 mm with a base layer of 0.16 mm Infill: 100% Color Changes: Start with Blue (Esun PLA Blue) At layer 8 (0.72 mm), swap to…