Search results: wns

Sort order

Counting matching models…

P
PrintablesAdam

Downspout gutter diverter for rain barrel

Update 2024-05-15: There is a new version that includes two side ramps for additional rainwater collection. It's available for the 2"x3" and 2 5/8" × 2 5/8" sizes so far. Update 2025-03-04: Added a “bare” outlet adapter to use as a base…

Downloads
698
Likes
177
Rating
4.86
P
PrintablesSJM

H0 Train Station Platform with downstairs, Bahnsteig Eisenbahnstation 1:87

H0 1:87 Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin & My World: 1026mm FR like high…

Downloads
200
Likes
17
Rating
0
P
PrintablesSJM

AddOn for H0 Train Station Platform with downstairs, Bahnsteig Eisenbahnstation 1:87

These are some add-ons for the Train Station Platform with downwarding stairs . You get a stairway railing /handrail and a fitting roof. Settings Value Infill 25% (adaptive cubic) Perimeters 2 Layer Height 0.15 mm Structural Material PETG…

Downloads
189
Likes
24
Rating
5
P
PrintablesPrintercat64

Downspout adapter

update 4/27/23: 3inch square to round_v2.3mf, redone in Fusion 360

Downloads
134
Likes
29
Rating
0
P
Printables3DFW

Pathfinder Pawns Storage Small Tray Remix

I updated the small tray from the original to store more small pawns in the same overall footprint. I am able to fit all small pawns from Bestiaries 1-3, Abomination Vaults, and the Beginner Box.

Downloads
80
Likes
8
Rating
0
P
Printablesbjamdesign

Hydroponic - 3x4" downspout railing mount

Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…

Downloads
44
Likes
26
Rating
0
P
PrintablesDavidm_comp

Five Crowns Box Lid

This is a Five Crowns version of the lid for the Uno Box by Markus_p which is based on the Rugged Box by Whity . Used the deeper base Uno Box https://www.printables.com/model/937599-deeper-bottom-case-for-uno-card-box Also used the gasket…

Downloads
41
Likes
6
Rating
0
P
PrintablesMiner

Townscaper tower

You should use supports under the tip of the tower if you want a perfect print. All models can be printed except the selfedit this model is made of individual parts so you can do anything you want.

Downloads
25
Likes
6
Rating
0
P
PrintablesBrite Minis

Townsfolk zombie 28mm (supportless, FDM friendly)

A townsfolke zombie. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE Other zombies seen in…

Downloads
1,452
Likes
139
Rating
5
P
Printablesbenmoulton

Disney and Other Princess Crowns for Dressup, Cosplay, Halloween, and more!

Print your own princess crown! There are crowns for Anastasia, Ariel, Aurora, Azula, Cinderella, Elsa, The Evil Queen, Jasmine, Mulan, Rapunzel, Snow White, and Tiana. There are child, youth, and adult sizes! Most of the pictured crowns…

Downloads
883
Likes
288
Rating
4.25
P
Printablesgexgecko

'Hues and Cues' scoring fence and printable player pawns

If you guess the exact colour, you deserve a crown! Scoring is the same as the original fence, 3 for the centre square, 2 for the 8 surrounding it, and 1 for the circle beyond that. Scoring values are marked on the fence! Print at 0.12…

Downloads
859
Likes
73
Rating
4.86
P
Printablesjshessen

Gutter/Downspout Drain Grate/Cover (Parametric)

** Updated April, 2022 All of the code/files are contained within GitHub - GutterDrainGrate I would recommend either pulling via git: ```shell git clone https://github.com/jshessen/GutterDrainGrate.git ``` or downloading the repo as a zip…

Downloads
746
Likes
75
Rating
4.83
P
Printablessecv

Five Crowns Deck Box

Don't forget to like and rate! A deck box for the Five Crowns card game. Uses a sliding lid. Fits cards AND instructions.

Downloads
646
Likes
73
Rating
4.92

[unofficial] LowRider v4 DIY CNC, gantry back covers, hinged for opening, and can pop out and back in, plus "tie downs" for them, and an in-gantry Jackpot mount

This is unofficial, not needed for a functional LowRider 4, and offers primarily cosmetic (aesthetic) benefit (for the most part; the “tie downs” do have some zip tie slots that could be used to help with wrangling wires, and the back…

Downloads
623
Likes
78
Rating
4.8
P
PrintablesSAVAGENYHK

Rain Diverter System for 2x3 Downspout for Rain Barrels

This is an original design for a 2x3 gutter downspout. It traps and diverts rainwater from a downspout into a rain barrel. Creating rain barrels is a great tool to collect and save rainwater for your home gardening needs and hydroponic…

Downloads
595
Likes
103
Rating
5
P
PrintablesLockwatcher

"People Persons" - Pawns for your game

When I created my recent Stargate Game - I came up with these easy-to-print game pawns. I have included print files for 3 different sizes. These will not need any supports to print! These can also be played with like small doll-house…

Downloads
595
Likes
50
Rating
5
P
PrintablesJZ

Dr. Browns baby bottle handle

Babies have more fun drinking their milk with these handles. They sit below the screw on top, but do not interfere with the seal. The fit is not too tight, so they can rotate around the bottle. There are two versions, V2 has a more…

Downloads
538
Likes
71
Rating
0
P
PrintablesChris

US downspout to garden hose adapter (for diversion to rain barrel, etc.)

This remix allows diversion of water from a gutter downspout (common US 2in x 3in size) to a garden hose (3/4in GHT hose fitting). Great for channeling water in a different direction, to a rain collection barrel, or a garden. It maintains…

Downloads
512
Likes
78
Rating
5
P
PrintablesTom Vít

Tom's Czech Crowns Coins Slide and Holder (V2)

[EN] There is something for all residents of the Czech Republic this time. As we still do not use Euro (and it's a silly thing more and more for the lands in the center of Europe), we like to use some coins pool, sorter, holder… for local…

Downloads
504
Likes
81
Rating
5
P
PrintablesTerrain4Print

New York brownstone buildings

Produced with the awesome support from my Patrons! This is a set of modular brownstone buildings similar to what can be found in New York and other cities along the US East Coast (I am a Swede so correct me if I am wrong). There are four…

Downloads
442
Likes
109
Rating
0
P
Printablesbjamdesign

Downspout Cap - Hydroponics - 4"x3" Vinyl

I needed a 4x3" downspout endcap for a hydroponic project. I modeled this for a vinyl downspout I picked up from Lowes. There is ~1mm clearance for silicone caulking to make it water tight. Need a water level indicator for your new…

Downloads
437
Likes
51
Rating
5
P
Printablespmeineke

Cleveland Browns Logo

Cleveland Browns 1st Layer Orange 2nd Brown

Downloads
396
Likes
41
Rating
5
P
Printablespavel.sindelka

Meadow + Downstream Extension Insert

This insert allows you to store the whole Meadow boardgame AND the Meadow:Downstream extension in one box. You will need: 4x StockBox for foldable deckholders from base game (N, W, S, E cards) 1x StockBox_Narrow for foldable deckholder…

Downloads
386
Likes
52
Rating
5
P
PrintablesCal

Gutter Downspout Filter

This is a very simple downspout, but it works well. It sits up high enough that you can mow underneath it. The vanes disperse the water out, which keeps your lawn from eroding away. It doesn't kick water very far away from your…

Downloads
358
Likes
90
Rating
5
P
Printables3D Musketeers

4x3in Downspout gutter adapter!

I live in Tampa, FL, and Hurricane Ian is about to rock us.. well.. Like a Hurricane. To deal with the deluge of water I made a tapered adapter to take the 4x3in downspout to a 3in flexible backwash hose for a pool (exact one here…

Downloads
355
Likes
72
Rating
5
P
PrintablesJordan

Dice Drinking Game (Three Crowns)

Left Arrow - Person on the left drinks. B.A.R. (Bust a Rhyme)- Say any word and the next person must rhyme with the word) Lucky Charm - Decide one rule that everyone must follow. When someone fails to follow the rule, they drink. Rule…

Downloads
328
Likes
49
Rating
5
P
PrintablesPrinterchick

Flux Beambox lasercutter honycomb Hold downs

A dozen hexagon hold-downs designed to fit snugly into the Beambox and Beambox pro honeycomb plate for laser cutting. If you have a different laser cutter that has a honeycomb base plate, let me know and I can upload a set of 12 labeled…

Downloads
312
Likes
28
Rating
5
P
PrintablesBen_P

Modern pawns for Risk and other board games

Got tired to those old school soldiers, horses and cannons of the Risk and since I couldn't find more modern pieces ready, I made my own. For starters there is now 3 tanks which are modelled after real life counterparts as close as my…

Downloads
306
Likes
29
Rating
0
P
Printablestom7688

Door Hinge Jig with clamp downs

I took the original model from gpace08 and modified it slightly. First iteration I made 9.5mm (3/8") taller for the router bits I had. The next iteration I added wings to the sides. this served 2 purposes, the first was to have a larger…

Downloads
299
Likes
26
Rating
0
P
PrintablesSirprintsalot

Cleveland Browns Coaster Set

Manual Color Change Coaster Start - Brown Black - 4.6mm Orange - 5.4mm Stand Start - Brown Black - 4.0 Orange - 4.6 The stand will hold 5 coasters. Or you can just print one coaster with no stand.

Downloads
296
Likes
27
Rating
5
P
PrintablesTdub415

Pathfinder Pawns Storage Insert

Box insert for the pathfinder pawns box to store the pawns in an organized fashion. Insert fits in the Pathfinder 2e Pawns Bestiary 1 box (as well as the beginner box 2e). The box lids do not fit all the way down, as these inserts add…

Downloads
268
Likes
22
Rating
4.5
P
Printablesdrachenfire84

Downspout Splash Boat

Deploy your boat to guard your downspout and direct water away from the foundation to your garden or yard. A familiar friend of 3D printers, this boat can help direct water away from the foundation of your home or building as it comes out…

Downloads
266
Likes
104
Rating
4.5
P
Printablesjs500

Obsession Insert / Organizer - Holds 2nd Ed. Base Game, Wessex, Upstairs Downstairs, and Useful Box

Update: I posted an updated insert that supports all the released expansions for Obsession through the Characters expansion here . ***Original Post Below*** This is an insert / organizer for Obsession (2nd ed.) with: • Wessex Expansion; •…

Downloads
251
Likes
53
Rating
5
P

R3-D1 Dawnstar ultra-mobile 3D printed female Mech————R3-D1 启明星 超可动3D打印机娘

Welcome to follow Xinghai Icreator. You can also watch the assembly videos on my YouTube homepage channel.

Downloads
248
Likes
79
Rating
5
P
Printableskanhelf

Rain Barrel Downspout Diverter

Use this for DIY rain barrel setups! Prints in 3 pieces with supports only needed on 1 (the top piece). Find a junction in your downspout and install. Attach a 20mm ID hose from this to your rain barrel.

Downloads
243
Likes
40
Rating
5
P
PrintablesMaik Sommer

PUBG Playerunknowns Battleground Wintores VSS

I designed this weapon for some Cosplayers. Never printed this Thing, maybe you can give me some Infos after you print this sweet thing. Update 1 on Request cut the pieces one by one so you can add this easier into the slicer software!…

Downloads
241
Likes
53
Rating
0
P
PrintablesJoseph Marlin

4x3 Gutter Downspout End Cap

4" by 3" gutter downspouts from Lowes are great if you're looking for hydroponic nutrient film technique (NFT) growing channels. However, it comes with the challenge of closing off one of the ends. This is my solution. A very simple end…

Downloads
237
Likes
37
Rating
0

LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry

LowRider v4 CNC - Tie Downs to secure 24v Power Supply (AC-DC) to lower strut plate of gantry. This is the 24v power supply I purchased from Ryan at v1e.com … Print as oriented. No supported needed. I pre-drilled and used M3 screws, but…

Downloads
223
Likes
34
Rating
5
P

Townsfolke: Starter Set

Hear ye, hear ye! Introducing Townsfolke , a series of civilian miniatures appropriate for any medieval fantasy tabletop game! All 3d-printable models are supplied without bases and print 100% support free. Townsfolke are scaled for…

Downloads
223
Likes
32
Rating
0
P
Printablesthemzlab

downspout drain cover 4-inch

This is a very easy print. I used a 0.8 nozzle and PLA but I am unsure how long this will last in the sunlight. I will not be surprised if I have to find a filament better suited for outdoors later. I am in the USA and this cover fits…

Downloads
215
Likes
21
Rating
4
P
PrintablesMonsieur-Pierre

Board Game Pawns

💖 Support Me If you like this model and want to use it for commercial purposes , you can support me on Patreon and get a commercial license https://www.patreon.com/cw/MonsieurPierre A set of board game pawns. Perfect for replacing lost…

Downloads
211
Likes
15
Rating
5
P
Printablespmprusty

2 x 3 downspout end cap (pvc only)

this model works very well. I used 20% infill and no supports. i used a net cup from here to be incorporated in the finished hydroponic test bed.

Downloads
209
Likes
13
Rating
0
P
PrintablescncMaker1976

MK3/S/S+ ribbon cable tie downs

The day after I made these, I noticed this has been done twice before. So here is a third version of a simple tie down bracket. Print files include PET and PLA. The PLA file has a slightly different geometry to accommodate the harder…

Downloads
195
Likes
40
Rating
5
P
PrintablesIceman

Gutter Downspout Band/Clip/Mount/bracket for 2 x 3 Inch downspouts

Mounting band/clip for 2 x 3 inch gutter downspouts. Pretty self explanatory to print and use. No supports needed. I made these because I could not get anything similar in the color I wanted… only white :-( I also really hate the look of…

Downloads
192
Likes
29
Rating
5
P
PrintablesJosiah Payne

Traxxas Maxx v2 Battery Strap Tie Downs

This replaces the stock Traxxas Maxx (v2) battery latch system with a velcro strap system in order to use larger batteries. Just remove the two bolt on pieces and replace with these printed ones. Uses the stock screws for the front and…

Downloads
189
Likes
15
Rating
5
P
PrintablesWilly

Downstem for Water Pipe

13mm downstem for 14mm grommet Grommet: https://www.printables.com/model/446208-tpu-14mm-grommet

Downloads
188
Likes
18
Rating
0
P
PrintablesZRex

Downspout accessories

Some parts I needed to disconnect my house's rainwater runoff from the city sewer line. Designed for printing with a 0.6mm nozzle, but other sizes should work too.

Downloads
187
Likes
44
Rating
5
P
Printablespwmodder1027

Laser Magnetic material hold downs

I purchased magnets from Amazon to hold down warped plywood in my laser engraver and the tops were too tall, but without them it was difficult to lift and position the magnets. This design allows you to leave the magnet flat on the…

Downloads
185
Likes
26
Rating
5
P
PrintablesSigismond0

Root Homeland Expansion Vagabond/Knaves Pawns

For your print-and-play pleasure.

Downloads
177
Likes
7
Rating
5

Tiny Towns Organizer (remix)

This is a slight remix of iksnel's organizer for the board game Tiny Towns. I recreated all the parts and made some small modifications as described below, but the design itself is unchanged. This is a great storage solution that allows…

Downloads
177
Likes
36
Rating
5
P
PrintablesDan23945

Cleveland Browns Dawg Pound Plaque

Cleveland Browns Dawg Pound plaque designed to fit on a 220 x 200mm bed (Ender 3). The “trinkets” are designed to be printed in the correct color and then inserted into the base. I HIGHLY recommend you print the “Fit Test” base and…

Downloads
175
Likes
22
Rating
5
P
Printablesmarvaments

Dr Browns Brown 8 oz 6-pack Baby Bottle Holder

A simple bottle holder to carry Dr Brown's baby bottles 8oz size. Designed to be put in a lunchbox to bring to daycare.

Downloads
170
Likes
26
Rating
5
P
PrintablesTheftMonkey

HO Scale Building Downspout

This is an HO scale downspout that I designed to add some more details to my buildings. Printed with PLA at .1mm Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** Yes Supports: No **Resolution:** .10mm Filament: Prusament…

Downloads
170
Likes
35
Rating
0
P
PrintablesCaptainMisclick

Gutter or Downspout Stake for Yard

No supports are required. Use a brim to ensure adhesion of the thin contact profile of the design.

Downloads
169
Likes
22
Rating
5

Cute Lovecraft inspired pawns for multi-material, full color and single material 3D printing

Rock-a-bye Cthulhu, In R'lyeh deep. Dead you may be, or only in sleep. When you awake, the madness will fall, Then the Old Ones will teach man new ways to shout and kill and revel, and all the earth would flame with a holocaust of ecstasy…

Downloads
166
Likes
49
Rating
0
P
PrintablesAdam

Ground support for downspout rain gutter

This bracket will keep the end of your rain gutter supported off the ground. It is sized for 2"x3" (nominal) downspout, a common residential size in North America. The actual inner width is 83mm. The bracket is designed to support the…

Downloads
166
Likes
44
Rating
5
P
PrintablesKeilTheOld

RV Corner Downspout Gutter Corner

Needed to replace downspouts on RV gutters after winter

Downloads
163
Likes
24
Rating
5
P
Printables3dextrusion

Avengers pawns

These are Avengers pawns for custom board game. The models are all simple remixes of existing 3D files found on thingiverse and myminifactory. Tag me on instagram @3dextrusion to be featured!

Downloads
163
Likes
10
Rating
0
P
Printableshg1027

Gutter to Downspout Adapter

The hardware store I started at had gutters, but only 3x4 downspouts. The second store had the 2x3 downspouts I wanted, but only these mid sized outlets. This adapter makes them work together. Parametric, so maybe it can work for you.

Downloads
162
Likes
13
Rating
0
P
Printablesthreedjd

Hydroponic NFT Downspout Horizontal Bracket

These brackets will fit the 2"x3" vinyl downspouts sold at Lowe's or HomeDepot. They should work well for a hydroponic setup or on the side of your house. My hydroponic system is mounted horizontally on supports instead of vertical like…

Downloads
157
Likes
41
Rating
0
P
PrintablesChad

2" Vinyl Downspout RC Track Connectors

These are parts for connecting sections of 2" vinyl downspout together for 1/10 Scale indoor carpet RC tracks. -Vinyl Downspout Used:…

Downloads
156
Likes
17
Rating
0
P
Printables3DCraft

Miniature Brownstone House

Detailed Urban Building Model for Dioramas & Display

Downloads
150
Likes
20
Rating
0

Joyful Banker Medieval Townsfolk Miniature

This joyfully rotund baker takes the greatest joy in his baked creations and will make a fantastic addition to your town

Downloads
145
Likes
17
Rating
0
P
Printablesaalexisa14

Sliding Lid Box for 5-Crowns Card Game

This is a standard card box we use for the 5 Crowns card game. I inlaid some crowns in the lid for fun. I also included the .stl for a blank version of the lid too. The game consists of about 120 cards, so the box should work for most…

Downloads
145
Likes
17
Rating
5
P
PrintablesBern

Parts Tray for teardowns

This is a printable tray for holding small parts while repairing. Better printed in Flexible filament. Also uploaded the Sketchup model for mods. as well as the printable model for the Ender 3 using Flexible filament.

Downloads
143
Likes
18
Rating
4
P
Printablesslayernine

Downspout Leaf Catcher

Remix of https://www.thingiverse.com/thing:2965677 Wanted a leaf catcher to put above my rain barrels to keep debris from getting in the barrels. I wasn't happy with the existing designs so I made my own. Chopped up the model with…

Downloads
142
Likes
37
Rating
0
P
PrintablesGjoopa

Cleveland Browns Logo

Multi-layered Cleveland Browns Logo

Downloads
142
Likes
4
Rating
0
P
Printablesjukeboxpunk

3x4 Downspout End with 3/4" Elbow

3x4 Downspout End with ¾" 90 degree elbow. Will accept a ¾" pvc pipe. Remixed the 3x4 Downspout and created a 90 degree elbow for ¾" pipe. Perfect for hyrdoponics drainage when using a downspout. PETG 20% infill Print with trees and raft…

Downloads
137
Likes
17
Rating
5
P
PrintablesJorg

Downspout Leaf Diverter

Just a simple trash diverter for a downspout. Print Settings Printer: Micromake D1 Rafts: No Supports: No Resolution: 0.33 or as large as your nozzle allows Infill: Solid via 2.0 mm shells (5 shells with a 0.4 nozzle) Category: Outdoor &…

Downloads
136
Likes
21
Rating
0
P
PrintablesJellyTitan

3" x 2" downspout to 4" pipe adapter

3d printable downspout adapter that slips over the downspout and can snap into 4" corrugated drainage pipe, or sit in a 4" non-corrugated PVC pipe. These adapters are usually available at the hardware store and made of durable HDPE that…

Downloads
135
Likes
15
Rating
0
P
PrintablesStarForge

28mm DND Fantasy Terrain Townsquare Medieval Well with Bucket StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
133
Likes
18
Rating
0

Wine Merchant Medieval Townsfolk Miniature

She carries the finest wines in all the land, a perfect addition to your medieval town table top scenario

Downloads
133
Likes
10
Rating
0
P
PrintablesMST8K

Downspout Leaf Filter

I created this out of frustration with existing downspout filters. Most don't work well at all and the ones that do are very expensive. This is in 3 parts: 1.) Splashinator - This piece is optional, but from my 2nd story gutter, the water…

Downloads
133
Likes
24
Rating
5
P
PrintablesJonatan Lepík

10 Czech Crowns to shopping trolley, 10 Kč, 10 Kc, žeton

10 Czech Crowns to shopping trolley, 10 Kč Česká desetikoruna do nákupního vozíku

Downloads
130
Likes
2
Rating
0
P

Cleveland Browns Oversized Necklace Logo

Cleveland Browns Oversized Necklace Logo that I designed. I hope you enjoy!

Downloads
128
Likes
11
Rating
0
P
Printablesn3cr0t1k

Downspout to Downspout Adapter

2x3 over gutter to gutter insert. Both ends are quite tight. Slight offset and straight models available. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: 0.15 Infill: 15-20% Filament: Generic PETG…

Downloads
126
Likes
13
Rating
5
P

Parametric rainwater collector / harvester 60-120mm gutter downspout

This is my take on a rain water collector. It's been in use for 2 weeks now and works just fine. The 3mf and gcode files here are for a 100mm pipe with a 54mm hole in the side and a hose with 33mm diameter. The FreeCAD model is adjustable…

Downloads
126
Likes
40
Rating
0
P
PrintablesYstvan

Set of cute pawns/meeples/miniatures for family boardgames - 28mm base

Just collected these cute miniatures from the web and resized them to fit a 28mm base. Please acknowledge the original creators. Each member of the family has its own! I play with the F-ing fabulous unicorn. 0.4mm is fine, sand them,…

Downloads
125
Likes
21
Rating
0

Stingy Banker 28mm miniature medieval townsfolk

A delightful miniature to add to your medieval town to give character and charm to the tabletop

Downloads
118
Likes
12
Rating
0
P
PrintablesIceman

Rain Gutter Downspout Cover (2x3 inch, 3x3 inch, 3x4 inch, parametric)

Cover for rain gutter downspouts. Fits 2x3, 3x3, and 3x4 (parametric) down spouts with wire mesh cover to keep rodents out. I had a problem with mice and chipmunks getting into my downspouts. This cover keeps them out an looks fairly…

Downloads
114
Likes
18
Rating
5
P
Printablesfardog

Customizable Gutter Downspout "T" Junction

A "T" junction for a gutter downspout. The attached STL should be reasonably sized for standard 3x2" gutters, although I encourage measuring your downspouts for appropriate fit. This print is customizable, and should adjust reasonably to…

Downloads
114
Likes
19
Rating
0
P
PrintablesLynola

Rain Gutter Downspout Harvester

Install inline in downspout to harvest rain water for use in gardening or filling water bucket for animals to drink. Two models, depending on hose size. ½" tubing or 5/8" garden hose slip onto tap. Made with PETG. 15% infill, supports…

Downloads
109
Likes
32
Rating
5
P
PrintablesArogen67

Der Red Max Nosecone downscales (BT-5, BT-20, BT-50, BT-55, BT-56)

If you would like to show some gratitude for this model and encourage me to create more, you can leave a tip for me via PayPal at https://www.paypal.com/paypalme/Arogen67 . Thanks. These are downscaled versions of the Estes Der Red Max…

Downloads
108
Likes
15
Rating
0
P

3x4 Downspout end cover

no special instructions. I recommend having the base be solid infill but there's no reason it shouldn't work if its not.

Downloads
106
Likes
3
Rating
0
P
PrintablesTim Holzhausen

Pokeball to store PokéPawns: generic-use pokemon game pieces

My Son love the PokéPawns from Thing 2271264. So I decided to Remix the Pokeball from Thing 411193 to store the PokéPawns in it. Update: I added more Pokemon. These are to be printed with the Base. I also added a holder for a standard…

Downloads
106
Likes
16
Rating
0
P
PrintablesModel Magic

Horror Movies - Ginger Snaps - Beast of Bailey Downs - 2000

Horror Movies - Ginger Snaps - Beast of Bailey Downs - 2000 3D printable model.

Downloads
105
Likes
17
Rating
0
P
Printablesvoiyt

Downspout Adapter 3x4x3 (f3d included for easy customization)

Downspout Adapter 3x4x3 (f3d included for easy customization) I have used one of these since the beginning of 2021, and it is still working perfectly. Because it's PETG and has multiple walls, it is very strong. Hitting it with the lawn…

Downloads
100
Likes
13
Rating
5
P
Printablesjukeboxpunk

3x4 Downspout End with Cleanout and 9mm/3-8ths connector

3x4 Downspout End with Cleanout and 9mm/3-8ths connector Remixed the 3x4 Downspout and merged to a 3d print file of a pill bottle. Scaled up, combined the spout end with pill bottle opening; combined the 3/8ths tube connector to the lid…

Downloads
96
Likes
9
Rating
0
P
PrintablesJohnny Casino

Cleveland Browns Football Helmet

*** PLEASE READ *** I’ve received notice from Printables concerning my helmet designs. I don’t agree with the notice, but have decided to move my helmets to my Patreon Platform. I’ve actually had multiple requests to offer an avenue to…

Downloads
95
Likes
9
Rating
5
P
PrintablesFraoch

Downspout guard

This is a downspout guard that fits over a squarish 3" X 3-¼" downspout with multiple rows of drainage holes. The drainage holes on the bottom are flush with the base, which should prevent any water retention. A screw hole is provided for…

Downloads
94
Likes
16
Rating
0
P
PrintablesALE TNT

Monopoly vintage pawns - Monopoli pedine storiche

Per chi avesse perso qualche pedina o volesse rigiocare con le pedine "storiche" del Monopoly

Downloads
93
Likes
9
Rating
0
P
Printablesuh1mtp

CNC hold downs

Made for holding down project to CNC table. Cheap to print and replace. Two different sizes to accommodate different materials. Both have ¼ inch slots.

Downloads
93
Likes
5
Rating
5
P
PrintablesStarForge

28mm DND Fantasy Terrain Townsquare Medieval Well with Bucket StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Downloads
90
Likes
22
Rating
0
P
PrintablesCory

Townsfolk Tussle coins

I love the coins from the game, I wanted some that were a little thicker and chunkier. The files provided are the exact same size as the ones provided in the game. For my coins, I increased the size in my slicer to 3mm thick instead of…

Downloads
88
Likes
11
Rating
5
P
PrintablesKarabaz

Tiny Towns buildings insert

An insert to the Tiny Towns board game for super quick setup and clean up. It fits nicely to the original box. Just get it out of the box and you're ready to go: all the buildings are sorted and are ready to be used. Insert consists of…

Downloads
87
Likes
8
Rating
0
P
PrintablesactualSIZE

Rain-Chain Hanger for Inside of Downspout

This is a hanger and hook for a house gutter downspout so that a rain-chain can be hung from it. Print off this model and drop it into the downspout from above to give your rain-chain a proper attachment point.

Downloads
85
Likes
17
Rating
5
P
PrintablesAndrew Randles

Five Crowns version of the Rugged Card Box

Printed on an ender 3. Only took 4 filament swaps to make it. I would suggest pairing it with a deeper base. https://www.printables.com/model/937599-deeper-bottom-case-for-uno-card-box

Downloads
84
Likes
6
Rating
0
P
PrintablesMylerMaker3D

Throwback Cleveland Browns Logo Keychain

Originally published on 09/06/2019.

Downloads
81
Likes
6
Rating
5
P
PrintablesImagine That

"If I Ran the Circus" Clowns

“If I Ran the Curcus” – By DR SEUSS Clowns from the Dr. Seuss book as seen on the cover, and inside dedication pages. Please Note – The balloon string is fragile. Be careful taking it off of the printer bed, and handle with care. The…

Downloads
80
Likes
13
Rating
0
P
PrintablesBEM

Hinged card box for SkipBo or Crowns

This is a box used to store playing cards. The lid/hing part is a print-in-place part. The hing is then glued to the box (I just used crazy glue). The SkipBo part is a multi part file, just in case you have a multi filament printer.

Downloads
80
Likes
9
Rating
0