7,835 models
Low torques are necessary for many applications, such as carbon parts on mountain bikes or screw connections on electronic and robotic devices. But the usual torque wrenches works reliably only at 4 or 5 Newton meters and above. Fixed…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for PETGSource material: PET
Hello. This is the R.E.P Ratchet tool. It stand for Rapid Prototyped, Exposed Design & Pocket Sized Hex Driver Bit Ratchet Tool. This is a fast and practical, printed ratcheting ¼" hex driver!!! It is HEAVY DUTY and tested, with an…
Print approx. €0.31–€0.38 excl. taxPreliminary estimate for one variant
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Print approx. €0.05–€0.06 excl. taxPreliminary estimate for one variant
Insert holder for 7mm socket wrench ideal for unscrewing the printer nozzle…
Wrist brace (splint) for either hand A more rigid brace, suitable for broken wrist treatment, i.e. fracture of either the adjacent radial bone, ulnar bone, or wrist bones (excluding the scaphoid bone fracture, which requires fixation of…
Print approx. €4.27–€5.22 excl. taxPreliminary estimate for one variant
This case fits the Teyleten Robot ESP32-S3 Development Kit sold by Amazon… https://www.amazon.com/dp/B0B6HT7V7P?psc=1&ref=ppx_yo2ov_dt_b_product_details This development kit has two USB-C connectors without the pins soldered to the board.…
Print approx. €0.05–€0.07 excl. taxPreliminary estimate for PETGSource material: PET
Wrapping paper cutter for easy paper cutting. This is better than bothering with scissors. Model is programmed for a 9mm wide knife. →…
Print approx. €4.17–€5.10 excl. taxPreliminary estimate for one variant
Dragon on Egg: - Found a free Version of this mesh and Fixed for 3d printing. Also added UV textures to mesh. Sometimes the only way to fix models is to subdivided the mesh till its well over 3million tris and then go thorough the process…
Print approx. €33.89–€41.42 excl. taxPreliminary estimate for one variant
I need to service my fork recently and I found this ( https://www.thingiverse.com/thing:883685 ) on Thingiverse, so I print it out and unfortunately; it is too big and it does not fit my cheap shock. SAD... I then fire up my trusty CAD…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
Print approx. €0.06–€0.07 excl. taxPreliminary estimate for one variant
Mashup of 2 designs: Customizable Wrench Holder Peg board screwdriver holder Allow storing wrench perpendicular to the peg boards, saving a lot of space.
Print approx. €2.84–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
This is a mount for the new Starlink Mini antenna. It has spacers that can be scaled in the Z axis to adjust for different van roof ribs. They also act as a cable wrap for the 50 foot cable that comes with it. For the 2023 RAM Promaster I…
Print approx. €17.03–€20.82 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: FIXED SPIDER WEB - 18 SEPT, 2025. I wanted some Halloween decorations for the Lego Wreath I have. I wanted a simple design fitting with the other decorations and Lego's simple design. I found these designs that is part of a game,…
Print approx. €0.95–€1.17 excl. taxPreliminary estimate for one variant
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Print approx. €2.64–€3.23 excl. taxPreliminary estimate for one variant
This splint prints flat and can be easily molded to perfectly fit your wrist with a little heat (hot water, heat gun, oven, etc.). It is designed to comfortably immobilize your wrist, preventing ulnar and radial movement, while still…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for one variant
This is a box I designed for my kids to have fun with and practice their wrenching skills so someday they can do it for real. I tried to design everything to be as realistic as possible. The bolts are designed to look realistic, but they…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
For assembling all the small parts one gets when 3D printing, a little wrench which can be used for M3 sized nuts.
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
Esta peça esta no formato para Canhoto é necessário realizar o espelhamento para ser utilizado por destros. Utilizei as seguintes configurações na minha impressão: Preenchimento: 30% - Giróide Suporte: Sim (arvore) - Coloque a peça de pé…
Print approx. €2.00–€2.44 excl. taxPreliminary estimate for one variant
Make sure the cam is mounted securely before using to the avoid risk of tearing the flatflex. Contrary to other designs the grabbing teeth have a tiny angle to them, they get thicker in the middle. This allows for slight off-center usage…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Print approx. €8.24–€10.07 excl. taxPreliminary estimate for one variant
Vertical holder for standard metric wrenches.. 6-7, 8-9. 10-11, 12-13, 14-15, 16-17, 18-19, 20-22
Print approx. €3.52–€4.30 excl. taxPreliminary estimate for one variant
Please click ❤LIKE❤ if you appreciate my work 😊 AMS COLOR VERSION: makerworld.com/en/models/3168975-subaru-impreza-wrx-sti-sedan-wall-mounted Rally heritage meets minimalist wall art. This 3D printable model of the Subaru Impreza WRX STi…
Print approx. €11.71–€14.31 excl. taxPreliminary estimate for one variant
Easily printable wrist. Image segmentation made in 3D slicer. Other 3D works in Grasshopper and MeshMixer Lehce tisknutelné zápěstí. Segmentace CT dat dělaná ve 3D sliceru. Ostatní 3D práce v Grashhoperu a MeshMixeru. Prusament PLA…
Print approx. €12.58–€15.37 excl. taxPreliminary estimate for one variant
Simple opening and closing spanner for standard 4- or 8-ribbed lids of canisters between 1L-60L volume (DIN 45 thread, Ø48.2mm | DIN 51 thread, Ø58mm | DIN 61 thread, Ø65mm). Turn tool around or use the included insert depending on the…
Print approx. €1.95–€2.38 excl. taxPreliminary estimate for PETGSource material: PET
For final assembly, you will need two M8x50 bolts, two nuts, a 35mm wide and 0.5-1 m long sling, as well as a metal half-ring At both ends of the sling, sew a loop so that a bolt can be inserted into it. After that, insert this loop into…
Print approx. €18.93–€23.14 excl. taxPreliminary estimate for one variant
A functional study model of an intriguing wrist joint as seen in a brief Hackaday article about a dextrous robotic arm from Korea. https://hackaday.com/2019/10/20/humanoid-robot-has-joints-that-inspire/ I printed it in three colors for…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
Bollard key with longer handle and triangular insert. For more comfortable use on bollards with jammed mechanism. Print in PETG or ABS for good durability. Thanks to rflrkn for pointing out that the initial print file had too few infill.…
Print approx. €2.78–€3.40 excl. taxPreliminary estimate for PETGSource material: PET
This is a model of the Nuphy Air 75 wrist rest that is almost identical to the one listed on the website. The outside dimensions are the same with some liberty being made with the dimensions of the decorative cutout in the middle. The…
Print approx. €6.34–€7.75 excl. taxPreliminary estimate for one variant
Nice design for North American power bricks (wall warts) to wrap the attached cord. Compatible with polarized and 3-prong plugs. The unified design is recommended as it supports both horizontal and vertical bricks with one print. However,…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for one variant
Printable wrench mount that works with Ryobi link Requires Qty.3 M4 0.7 8mm cap head screws Pictured with Husky wrenches, tested with both SAE and MM, should work with most others as well. 9 slots, need more? print more! Suggest printing…
Print approx. €2.44–€2.98 excl. taxPreliminary estimate for PETGSource material: PET
Hi all lovers Easters time I created an Easter bunny wreath, for everyone who loves Easter. Ideal for decorating your front door. I hope you will like the model and it will decorate your home. Happy Printing :-)
Print approx. €2.19–€2.68 excl. taxPreliminary estimate for one variant
Snake Wrapped Around Crystal Ball
Print approx. €14.35–€17.53 excl. taxPreliminary estimate for one variant
Wall Art silhouette model of the Jeep Wrangler 392 XR. Adjustable size. I accept model suggestions or ideas you have.
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Gel heart-shaped shaped wrist rests are often used with split ergonomic keyboards because they are accessible and relatively inexpensive. This print wraps around the gel rest and allows for tilt and height adjustment using M6 screws and…
Print approx. €1.45–€1.77 excl. taxPreliminary estimate for PETGSource material: PET
HEADS UP: A new version compatible with LowRider v4 is now available. Get it here . Here's a helpful video I made about this: This is an adaptation of a Maxwell Kinematic coupling . You can read about that here:…
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
You must put a pause(M600) at 3.80 layer height and insert a 5 euro cents coin. (Otherwise after printing finish isn't possible to insert the coin properly…!)
Print approx. €0.22–€0.26 excl. taxPreliminary estimate for PETGSource material: PET
Wheel Wrench/Shock Cap Tool for easy disassembly of wheels and damper bodies. A dedicated set of RC tools are a must when getting into this hobby. Why not have some 3D Printed ones in the collection as well? Save some money with these…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
This is a very simple model to print I used 100% infill and a 1.5 layer height
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for one variant
Closed case for a esp 32 wroom (30pin) board without PLS connectors The case has a lid that snaps into place. There are special bumps on the lid that fit the buttons. The case also has cutouts for USB and LEDs.
Print approx. €0.38–€0.47 excl. taxPreliminary estimate for PETGSource material: PET
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
Print approx. €2.33–€2.85 excl. taxPreliminary estimate for PETGSource material: PET
Print settings Material : ASA 0.15mm layer height 4 perimeters 20 percent infill 10 top and bottom full layers supports needed Strap: 20mm backpack strap Note: licence is the same like original model.
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
With ironing and colour switch for 2 white layers in the middle make a white rectangle prepared to write description with permanent marker pen. No paper sticker needed.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I used several Thingiverse models to create this advent decoration. The wreath base is generated with a scad file from https://www.thingiverse.com/thing:1240419 . A poinsettia flower from https://www.thingiverse.com/thing:1185399 was…
Print approx. €10.73–€13.12 excl. taxPreliminary estimate for one variant
The is a prototype of a wrench used to tighten/loosen the nut on reloading dies. Fits a 1-1/8" nut. This was designed for Lee reloading presses which have a very tight area to fit the wrench. Now that the prototype works/fits I will…
Print approx. €0.77–€0.95 excl. taxPreliminary estimate for PETGSource material: PET
Test the max flow rate of your K1 / K1C / K1 Max hotend using the pre-sliced GCode. !!! IMPORTANT !!! Uncomment lines 41, 52, 451, and 458 (the ones following the comment (; *** Uncomment next line ***) using an editor like Notepad++. The…
Print approx. €0.71–€0.87 excl. taxPreliminary estimate for one variant
Recreated in Fusion360 based on original design by @80am33. Included a version with names, so you can customize it in Fusion360. Enjoy!!! Recriado no Fusion360 baseado no design original do @80am33. Inclui uma versão com nomes para que…
Print approx. €1.46–€1.79 excl. taxPreliminary estimate for one variant
Coaxial grip that can hold and work with 1.5/2/2.5/3/4/5/6mm hex wrenches. There seems to be no exact standard for the radius (R) of the L-shape of a hexagonal wrench, but we have made it correspond from R=S to about R=Sx2. ( S = distance…
Print approx. €0.38–€0.46 excl. taxPreliminary estimate for PETGSource material: PET
Wanted to combine my remix of Masibu's tape hanging system that holds my Wera Joker Wrenches with a remix of Luma's DDD Wall Control System so I could hang it in the slots on my Wall Control board. Hardware: 10 M4x12 screws 250mm length…
Print approx. €0.16–€0.20 excl. taxPreliminary estimate for one variant
The is a wrench used to tighten or loosen the nut on reloading dies with a 1-1/8" nut.
Print approx. €1.02–€1.25 excl. taxPreliminary estimate for PETGSource material: PET
If you 3D print, you've probably played with LEGOs once or twice, maybe you're even a fan. You may even see the benefits of LEGO-based decoration. But if you're like me, you're stuck wishing for decorations that are larger than a few…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for one variant
In the project, pupils will get to know how a person who can't see lives. As part of the project, a discussion will be held with a blind person who will introduce them to the issues of everyday life.
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
Print approx. €0.48–€0.59 excl. taxPreliminary estimate for PETGSource material: PET
These brackets are to fit a AM4 CPU fan to fit on a LGA 2011-3 Socket of an X99 Motherboard. The example shows the fan to be an AMD Wraight. In the example pictures I used a Kingroon KP3S Pro V2 to print. Happy printing!
Print approx. €1.27–€1.55 excl. taxPreliminary estimate for one variant
A simple wrench to help turn the locking pins for Maxtrax mounts. Print instructions You have two options: Use the pre-sliced G-code Slice it and use the following settings**: Print settings: 0.15mm QUALITY Filament: PETG Infill: 30%…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
Advent wreath Simply plug them together and put 1 flame on each advent. Have fun ! Advendskranz Einfach zusammenstecken und an jedem Advent 1 Flamme draufstecken. Viel Spaß !
Print approx. €0.44–€0.53 excl. taxPreliminary estimate for one variant
I subtracted the chamfer of Mike Ant's module from FluffyBunny's model. Now it works for an extruder with a sock and nests neatly inside IBNobody's MK4 Nextruder Nozzle Change Heater Block Clamp. I'm sorry it looks that way.
Print approx. €0.50–€0.62 excl. taxPreliminary estimate for one variant
This simple printable elegantly displays your wristwatches. The stand features the following: A compliant, flexible band that gently sizes itself to your watch for a secure grip A dovetail link system for linking multiple stands together,…
Print approx. €0.25–€0.31 excl. taxPreliminary estimate for one variant
I Put 100% infill for the best strength.
Print approx. €0.47–€0.57 excl. taxPreliminary estimate for one variant
Print this model and simply swap spindles instead! Works great with my Dymo LableWriter 450 Turbo. This model can also serve as "replacement parts" as they are interchangeable with the original spindle parts that come with the printer.…
Print approx. €4.41–€5.39 excl. taxPreliminary estimate for PETGSource material: PET
A small Advent wreath in which you put the candle upside down in the wreath depending on the day of Advent. If you pause the candle in G-code and change the color roller, you don't need to paint the flame. Ein kleiner Adventskranz bei dem…
Print approx. €3.46–€4.23 excl. taxPreliminary estimate for one variant
Find 3D-Printed RC cars here.
Print approx. €1.12–€1.37 excl. taxPreliminary estimate for one variant
Print in PETG for best durability results or order from my shop . Based on the bullet point mounting solutions metal dash mount for 2024 Jeep Wrangler. 50% infill minimum. Improvements are shown with higher infill. Highly recommended to…
Print approx. €5.21–€6.37 excl. taxPreliminary estimate for PETGSource material: PET
Wrexham AFC Dragon
Print approx. €0.45–€0.55 excl. taxPreliminary estimate for one variant
A small, simple standee for the Battlement Tokens. Allows for greater visibility while occupying less space in the region. Recommend Prusament Oh My Gold (Blend) PLA to match the Archwright Hero Board.
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for one variant
Occasionally I will write a note in a card. I use this ruler to make straight lines with a pencil. I write my note on these lines using a pen. After the ink dries, I erase the pencil lines. It makes the note look straight and much nicer.
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Crafted with a honeycomb structure, this wrist stabilizer offers exceptional strength and durability while significantly reducing its overall weight. The honeycomb design not only ensures optimal support but also allows for better…
Print approx. €6.06–€7.41 excl. taxPreliminary estimate for one variant
I made this as a finger wrench / wing nut tool to help me remove/apply an M6 locking nut on a long threaded bolt. This little tool allows you to get enough torque with just your fingers for screwing a locking nut in places it might be…
Print approx. €0.39–€0.48 excl. taxPreliminary estimate for one variant
This calibration test prints multiple parts in different extrusion multipliers to give you multiple parts to analise the best outcome. Once you are happy with the calibration put the value in the extrusion multiplier in the slicer.…
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for PETGSource material: PET
Corvette Logo & Writing keychain
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for one variant
Small quick-print socket wrench with finger-sized handle for 3/8" sockets. Square block is printed horizontally so that it is less likely to shear along layer lines. If printing for print head nozzle work, use filament with a higher…
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Subaru logo & writing that i made because i love cars
Print approx. €0.72–€0.88 excl. taxPreliminary estimate for one variant
Needed some words on it to be compliant at work.
Print approx. €0.66–€0.80 excl. taxPreliminary estimate for PETGSource material: PET
Wrench (key) for air valve on paddle board or other inflatable things.
Print approx. €1.19–€1.46 excl. taxPreliminary estimate for one variant
I tried different wrench holders and found none of them satisfying so I made my own. Fits 8 metric box wrenches and hold them in place, the right thing for my tool box or drawer. I made also a model for combination wrenches . Happy…
Print approx. €1.99–€2.43 excl. taxPreliminary estimate for PETGSource material: PET
Tie Wrap Mount Tired of paying crazy amounts for tiewrap holders? 6$ CAD for a pack of 10? No thanks . This is a simple tiewrap holder made to fit the majority of tie wraps and sized to fit 1" (25.4mm) double sided tape. There is also a…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Best to print with supports, though without supports should be fine too. Convenient to use: the left side wedge is kept fairly small, so the pliers can be “lifted” upwards of the holder, not just “pulled” towards you. No further parts…
Print approx. €0.36–€0.44 excl. taxPreliminary estimate for PETGSource material: PET
I recently started using eric-anastas “Satsana Ender 3 Fan Duct” on both my Ender 3 Pro and CTC A10s printers. More specifically, I printed the Satsana duct for an Ender 3 Pro I recently picked up so that I could use its hotend cover to…
Print approx. €2.26–€2.76 excl. taxPreliminary estimate for one variant
As an alternative to a wrench or a monkey wrench (a adjustable wrench), I made myself a specially adapted tool. I used a modifier to have more infill in the relevant part of the wrench.
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
Cut a piece of white paper 37mm by 12mm and slide it inside the keyring, and you're done!
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This model comprises two parts that can be printed together. The g_code is from my Creality Ender S1 with default settings. If you want more control slice your own from the two .stl files. I used standard PLA filament The two parts will…
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
Feel free to scale it to your liking, total height works best at 0.8mm or less. You might want to use a pen/pencil with a fine, straight point to get into the letters properly.
Print approx. €3.15–€3.85 excl. taxPreliminary estimate for PETGSource material: PET
This model is the perfect tool for cutting Christmas wrapping paper. It is a small pocket sized cutter that is less fiddly than scissors because it doesn't go under the wrapping paper. It can be printed in PLA and is very sharp so be…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for one variant
I made it myself because I love cars
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Nissan logo & writing that I made because I love cars
Print approx. €0.68–€0.83 excl. taxPreliminary estimate for one variant
RFID scanner/writer for PC/Mac - based on Raspberry Pi zero and RC522 RFID. A quality USB RFID code reader/writer costs over $220. This system costs less than $20. You will need: Raspberry Pi Zero (W) RFID-RC522 expansion module Pi Zero…
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for PETGSource material: PET
Classic ship-wreck for sinking into your fish tank. Includes air hose connector to give the benchy some bubblin action. Plates added to let you weight down stubborn parts with fish tank gravel. To print - recommend making them not float -…
Print approx. €2.36–€2.89 excl. taxPreliminary estimate for PETGSource material: PET
neodymium magnet 60*10*3mm 8pcs The magnet I bought was slightly smaller than spec and I put thin painter tape on each side to fit in square cavity. These magnets can connect with frames or Q11 directly and steady. rubber foot 24 pcs…
Print approx. €4.77–€5.83 excl. taxPreliminary estimate for one variant
Candle holder which consists of two parts which can easily put together, so there is no need for support structures. The nail can be filled with a Ø 2mm x 50mm rod, so it gets stable. Category: Decor
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
In the project, students will get to know how a person who can't see lives. As part of the project, a discussion will be held with a blind person, who will introduce them to the issues of everyday life without sight. Necessary knowledge…
Print approx. €2.63–€3.21 excl. taxPreliminary estimate for one variant
Extended nozzle wrench insert to fit 20-50 mm long hex shank socket adapter. Very tight fit for maximal torque power and no slipping. print settings: 0.20mm filament: PLA (tested on Fillamentum) 15% gyroid infill I recommend vertical…
Print approx. €1.03–€1.26 excl. taxPreliminary estimate for one variant
check it out in onshape https://cad.onshape.com/documents/e73178ebbfdb86730e018ddb/w/e11b586dee2de4c2fe3c87f5/e/54c837b81a8a0a461d038384
Print approx. €8.01–€9.79 excl. taxPreliminary estimate for one variant
This is a tool to tighten or loosen a travel trailer camper hot water heater drain plug. Works with 1 1/8" hex head drain plugs. When printing, be sure to have extra thick walls. I used PETg with 10 layers of thickness on the walls giving…
Print approx. €7.53–€9.20 excl. taxPreliminary estimate for PETGSource material: PET
I made it myself because I love cars
Print approx. €0.64–€0.78 excl. taxPreliminary estimate for one variant
This is a wrist rest model for the Wooting 60 HE. The model accomodates the 45 deg tilt of the keyboard in the front. The model is split in the middle to fit the printspace of the mk3s. In order to print the whole model, please copy and…
Print approx. €8.60–€10.51 excl. taxPreliminary estimate for one variant
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
Print approx. €0.17–€0.20 excl. taxPreliminary estimate for one variant
Made for Prusa MK4 and Prusa XL but fits with every E3D nozzle. You can use it with the Prusa Nozzle Replacement Tools. No supports needed.
Print approx. €0.32–€0.39 excl. taxPreliminary estimate for one variant
Advent wreath designed for tea (led) candles. When using real tea candles, I recommend printing from durable material and using only under supervision. Tested only from PLA and the shape does not deform. For candle stands, I recommend…
Print approx. €6.99–€8.55 excl. taxPreliminary estimate for one variant
I made it myself because I love cars
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
A thumb wrestling ring You can use rubber bands or something for the outer part of the ring. *uses supports*
Print approx. €3.97–€4.85 excl. taxPreliminary estimate for one variant
