Counting matching models…
Hello there this a remix of the famous Moon Lamp for the use with WS2812B Led Strips and WLED (NodeMCU ESP 8266) to controll the LEDs. Moon Lamp Diameter approx.: 154 mm / 6 in Hole for the screwable LED Strip Mount approx.: 52mm / 2 in…
This LED strip clip should work for all 12mm width LED strips. I personally used and tested it for a WS2812b and it worked just fine. If you test other types and they work, please let me know in the comment section so i can add them as…
This model houses a WS2812 8x32 LED matrix, an ESP32 and the necessary cables. I'm using it as a status display for my PV inverter, the ESP runs Pixelix to display the contents. Most printers are too small to print the three parts in one…
UPDATE: I also have done a 32x32 Matrix in a IKEA picture frame with WLED: https://www.printables.com/de/model/501107-led-rgb-matrix-ws2812b-esp32-wled-32x32-round-squa…
This is a jig that can be used when soldering round SMD mounted WS2812 LED using 24 AWG Magnet Enamel Wire I created this jig to assist me in soldering magnet wire to pre-populated WS2812 LED assemblies. The jig will hold the LED in the…
Instructions are in the PDF document and in the YouTube video Printing the branches The snowflake consists of SIX branches. A branch is contained in the Snowflake.stl STL model and in the Snowflake.3mf 3MF file. Print SIX copies of the…
A NeoPixel / WS2812b controlled LED Matrix with 16x16 Pixels Easy to print: Can be printed without support, Filament Type doesn't really matter. I printed mine with PETG, but PLA or something else should work fine as well! I printed the…
Hello Makers, i wanted a bigger LED matrix with 32x32 LEDs. So i looked for a nice picture frame that fits also for the depth. I found a good & cheap one on IKEA. On Youtube there are lots of tutorials to build a 32x32 matrix out of four…
I found a great tutorial for electronics that was missing only the case. So I started modeling. Many thanks to Crazymakers for their work and sharing. Link to the video : Link to the website :…
I needed a simple clock in one room, so I designed one. 24h display to be equipped with WS2812B LED-Strips with 60LEDs/m. Each digit will need 15 LEDs, two on each segment with one LED hidden between to segments. I did a lazy wiring job,…
Here's how to build a simple RGB LED cube using cheap 8x8 WS2812 / Neopixel LED panels. The design is a single 3D printable piece, printed four times, that screws to the panels and forms a frame to hold them in place. Parts Needed: 4 x…
I got tired of the sore hands, so made a quick block to allow me to push ws2811 pixels into megatree strips. I added support under where you push in the pixel which made it a good bit easier to push. Uses ¼-20 countersunk screws to attach…
I made wire channels a little wider to accommodate thicker wires (24 / 26 AWG). I also removed part of the edges surrounding the LED so that it is easier to rotate the LED around to position it just right. Removing that material also…
LED diffuser grid for ws2812b strips (60 leds/meter) display. I would recommend to print it 0.2 layer height, print the 3 first layers with white PLA then change filament to black. Pictures are from 4 8x8 grid glued together for a 256…
Print it laying down. put the leds in the slots and wire it up. diffuse it from the front side
Hi, so I had some of these 8x8 LED Matrix panels laying around here and wanted to do something with it. I found the awesome matrix project from blueforcer which is open source. I wanted to use these 8x8 panels from CJMCU. Due to the…
Two methods for fixing the channel , holes along the center, and tabs on the side, these are 190mm long. I printed these in PLA, flat on the bed with supports everywhere, might get away without supports I didnt try. The led strip I used…
Just another seven segment LED clock. Current version of SW working, but it isn't final version. What is working: time on dislpay synchronization from NTP server time in local time zone. This zone must be specified manually on source code…
Remix (resize) case for Generic 8 x Neopixel (WS2812b) Stick / Bar - Case - WS2812b-8 Support me at: Buy Me A Coffee Original model did not fit these generic Neopixel 8 Bar / Sticks I found on aliexpress, had to resize. Aliexpress Amazon
RGB matrix case Diffuser (print in place with color change) Case stand Back frame to fit esp32 dev boards, mini bread boards, etc Printing Instructions Please use white filament for diffuser. The case & stand can be printed from any color…
Wordclock Matrix 11x11 Frame for WS2812B LEDs. LEDs can be simply clipped into the frame. For the Wordclock Frame i use a IKEA Ribba 23x23cm Frame https://www.ikea.com/at/de/p/ribba-rahmen-schwarz-40378401/ Source Code for this project…
It's a small clip for mounting the LED Strip to a Wall or Ceiling. I designed it for the WS2815 IP67 LEDs. It's nothing special, nor did it need any big Work for designing it. It works and gets its Job done. I would recommend to print it…
This is a simple mount for 10mm wide WS2812b (often known as neopixels) to mount along 2020 extrusion. It mounts the LEDs in parallel to the extrusion profile used. 100mm and 150mm lengths provided, as well as a .STEP and Fusion 360 file…
Pictures are of V1 STL files. I've printed but still need to solder the V2 STLs based lamp. V2 lamp uses 5-12 LED strips placed horizontally on the lamp - significantly reduces the amount of soldering! As well, the button has been moved…
holder and ground spike for WS2811 Addressable LED Pixel Lights
A lamp cover for WS2811 12mm Pixels that I use to decorate my house for the festive period. I print at 0.2mm layer height with a colour change at 10mm, I switch from black to natural PLA at that point which gives very nice light…
I have downloaded this file, and it did not fit the Siboor led lights I had purchased, Since I printed them on ABS, as it shrinks by around .5% on this long piece it was 2mm too short, so it was remixed with those tolances in mind, and…
LED diffuser Matrix 8х8 WS2812 Simple printing from the table upside down. Nozzle 0.5 layer height 0.2
The clock is based on WS22812b addressable LED strip and WEMOS-D1 mini (ESP-12F) board. In my case it is running the ESPHome software in combination with Home Assistant (see link below). Fusion 360 files are also available. To get result…
3d printed Connector for jumper wire 12mm Dupont as soldering aid. Find out everything you need to know about the connector on my blog: https://nerd-corner.com/printed-connector-as-soldering-aid-for-jumper-cables-and-led-strips/ 14mm…
separated diffuser for 8-bit stripe with 5050RGB chips
The simpliest LCD Neopixel wheel holder there is. Used for Neopixel LED ring WS28128B
An Awtrix 3 case for a WS2812 64-bit LED matrix is typically designed to house and protect the components of an Awtrix s
I have been having a hard time soldering the LED with the jumps due to many movements that make me solder my hand with the table. None of the solutions that I found were proper to my case, I wanted something straight forward that holds…
The first version published here is a rather minimal case with a surprisingly effective diffusor for one of those quadratic LED matrices you can get on Aliexpress with 256 WS2812b LED on it, 16 rows a 16 lights, spaced in a 10mm raster. A…
Raspberry Pico USB-C WS2812 clone snap-fit case. OnShape: https://cad.onshape.com/documents/cf6759dd1f144a7bfcea9e13
I had a bunch of WS2812B modules lying around so I decided to make this gear/flag display. If you don't have any of these modules you're probably better off ordering a 8x8 matrix and using that instead as there's less soldering to do, but…
Slides and snaps into the pixel for WS2811 RGB LED Lights. Includes drain holes.
This replaces the LED and switch mount for MAME KOF American Type Push buttons. Video example: https://youtu.be/QJ1OX\_ZHtn8 Buttons: https://www.aliexpress.com/item/33001974422.html LEDs: https://www.aliexpress.com/item/32960205936.html…
It 's a remix with wider socket for WS2812B led strip. All parts and dimensions are the same like in original project.
These bulb covers will fit WS2811 bulbs. They are printed in vase mode. I used a line witdh of 0.6mm. If you use a different with it might not fit as well, but it is also a way to adjust the fit to your needs. The bells are printed with…
I used 2 pieces diffuser from old LCD monitor. Cut to 321x81mm. You will need diffuser frame (without screen) from original project. I made mounting bracket to fasten matrix led down and also used as mounting hole for back cover. Two…
ESP32 Seven Segment Single Print Digital Clock - Modular and Monolithic LED Display Designs - Ws2818b LED Strip 100LED/m - Wemos D1 Mini - (ESPHome/Home Assistant) ESP Digital Clock Collection A collection of modern, customizable LED…
Showcase your custom pixel art, scrolling text, and dynamic animations with this sleek and versatile enclosure, designed specifically for a flexible 8x32 WS2812 RGB LED Matrix. This case provides a sleek and professional look and durable…
A quick snowflake made w/ an infuriating 61 pixels. It has a separate bracket you attach w/ m3 screws and sized to attach to ½" EMT.
A remix of the gutter clip that holds the ws2811 leds vertically on the front of the gutter.
Printed for Ping Pong Balls and Gardena Microdrip may be any other 3/16" or 4.6mm tube. You need 92 LEDS and PingPong Balls for hole sphere. 12 Parts 5 Arms with 16,5mm Gardena Tube Slices and 80 Parts 6 Arms with 27.5mm Tubes. You can…
This is a collection of WS2812B LED rings that I modeled in Fusion 360. If they can be of use in your modeling or just need a stand in before your LED rings come in the mail, here's the STL files I created for my project. Hope it helps…
The housing with lid is part of the Ambilight Monitor project. The case was printed with PLA. The following components are also required for the Ambilight: Arduino Nano Power supply 5V 2A ws2812b 88 LEDs (32 Top, 19 Left, 19 Right, 18…
7-Segment frame and transparant segments. Size 27 x 47 mm. WS2812B LED display behind the segments needs only one control wire for 28 segments. Arduino : Segment arranged a-g clockwise. Adafruit library. byte…
Simple and quick print (32min for 12 pieces with a 0.4mm nozzle) to hold WS2812B strips or any other LED strip with 10mm x 0.4mm size. The slot has a depth of 0.5mm, so please take care of elephant foots. I printend them in PETG Jet Black…
I wanted to replace the tracing paper diffuser with a 3D printing diffuser.
This is a chamber light mount for the Voron 2.4, 300mm. It uses standard 10mm wide, 3mm thick WS2812B type neopixel lights. Each section is 6-3/8" long (161.9mm), and is attached using two m3x8mm socket head cap screws and two m3 t slot…
Modular design approach to a stackable andon light using commonly available flexible WS2812 (or similar) LED strips. LED spacing is 16 mm. Great as a status indicator for machines, though not necessarily for industrial purposes. Module…
Useful to create lawn props with many stakes connected together to generate cool ground effects. There is 2 variations you can use. 5 pixels or 6 pixels. Material needed: 6 inch 11 Gauge Galvanized Pins Lawn Stakes (like in picture).…
Item is for modeling only and is not intended for printing
A quick project to build a home automation remote control for kids. My plan is to program the included ESP8266 for sending button triggered MQTT messages to a home assistant server over WIFI. This ESPHome code is a good starting point for…
Highly detailed. 1 meter consisting of individual LED segments. Can be combined to the length needed
runde Neopixel Uhr https://youtu.be/7\_WXX9sdJPA benötigte Druckteile (schwarz oder andere "nicht transparent") 4x Oberteil 4x unterteil 1x Aufhänger 12 Uhr 1x Stützer 6 Uhr 2x Stützer 3+9 Uhr 1x Halteklappe (klar / transparent) 12x…
IT IS STILL A WORK IN PROGESSS, it works, but i wish to add more improvements. I will continue as soon i will have time, i have just moved home after 3 years, there are more important things to get done around the house. Plus new…
I add the WS2812B LED HW-335 circle 3 bit module
Lötstellen Sicherung, für einen WS2812B Pixel LED Streifen, 3 Pin, 10mm Breit (innen) 12,6mm Gesamtbreite 4 mm Hoch 17mm Lang
This is an update to the simple diffuser to clip onto a CJMCU-2812B-16 Pixel WS2812 led ring. I increased the outer radius so the 0.9 mm outer shell fits over the ring. With my print settings it fits nicely and doesn't need any glue. I…
A bulb cover for a WS2811 light bulb in the shape of a snowflake.
Based on the incredible nice looking Jack O Lantern I remixed a version that changes the 3 original LED's for a fully wifi controllable battery powered version with WS2812 LED's. The led's change brightness/are flickering like a candle…
To make this strong print. slice with lots of walls and no infill. Tested with Rextin® WS2811 Pixels.
I have already seen such a lamp a few times and thought it was great. I still had a aluminium profile, a WS2812 / LED strip and the power supply, so I designed myself a base and assembled everything. The "intelligence" is based on a…
A 8x8 LED matrix as a printed LED word clock. Print the first layer or two layers of the top with transparent or translucent white, you could also add some layers of an another color, if you want a coloured appearance. The rest of the top…
Exactly the same, just modified to hold 2 more matrix screens for a total of 8x24 matrix grid. Use with iFlag as Simhub doesn't support multiple matrix's paired together. WLED also works really well with this.
Print the first 2 layers with a translucent material and the rest whatever you desire. You could print the entire thing in a translucent material as well. I used a PLA/Wood Fiber blend. This was designed to diffuse the LEDs in a 16x16…
A bulb cover for a WS2811 light bulb in the shape of a pumpkin.
reduced size of original for smaller led matrix
This is part of a bigger project, probably will add the other parts bit by bit.
I have seen some 16x16 WS2812 pixel matrix on Aliexpress.com and coul not resist to buy it and make something with it. So here is my creation, 16x16 WS2812 LED matrix panel. I have created some stand for that as well but i think it could…
Fibonacci256 is a beautiful 166mm circular disc with 256 WS2812B RGB LEDs surface mounted in a Fibonacci distribution. Fully open-source software, and programmable over Wi-Fi or micro USB cable. Buy from Evil Genius Labs:…
A small case for the ESP-01S WS2812 RGB LED Controller Module . All hail the Aircoookie !
holds one D1 Mini V3 NodeMCU ESP8266EX
The moment I saw the Prism Tower I knew I had to remix it ! This version is made for up to two buttons, 6x WS2812 and a Wemos D1 Mini. A wiring diagram and maybe some sketches will follow soon. Category: 3D Printing
PLA works just fine
Сетка для адресных диодов 16х16 с подключением к ESP8266 Node MCU Category: Electronics
Here is a holder for a WS2812 LED ring (12 LED). Optionally, a bracket for the holder for an Ikea Lack table is also included. The whole thing fits perfectly with the Octoprint LED status plugin. The screw holes are optional and…
Please post a pic if you make this! Note: I am working to create a thinner version of this. Needed bird spikes for the rain gauge on my Ambient Weather WS-2000 station however didn't purchase them. Built this ring that snaps into place.…
This is my design for a 91mm tall by 84mm diameter hexagon patterned WS2812B RGB LED array, touch controlled, lamp. The LED array is 5 horizontal strips of 12 WS2812B RGB LEDs at 60 LEDs/m. I've used vase mode printing on the outer shell…
WS2812B 10001000 You are heavily addicted to addressable LEDs? Then this is the right coaster for you. Or use it as a deco object on your workbench. The package is 10001000, so 20 times larger than the original 5050 WS2812B. Equipped with…
LED Strip Mount (WS2801 5050FC32-CV)
A simple design for a mount for WS2812b (neopixel) LED strip for the Sapphire Pro. The holders are mounted on the left and right side ot the printer, via T-slots (M3), at the height of the motors. The beam angle is 22.5°. 2 parts per…
Parts used: 1x ws2812 led ring with 24 units 1x esp01s 1x ws2812 esp01s to ws2812 adaptor unit Firmware: ESPHOME Configure the led ring with neopixelbus Here is an example that works:(Only the light section of esphome configuration file)…
A bulb cover for a WS2811 light bulb in the shape of a star.
Gantry mount that adds a WS2812B LED to the gantry of the Sovol SV06 using the screws used to mount the hotend to the gantry. Printing Layer height should be fine (≤ 0.2mm) to properly trap the LED, but otherwise prints fine with a 0.6mm…
I adapted the models made by Sergio Morales to match my need. I didn't want to have to use an ESP8266 (I wanted to use an external ESP32 running ESPHome). I added holes for easier wiring through the back of the digits instead of running…
Printed with Prusament PETG Orange 0.3mm for the bottom, 0.2mm for the top no rafts or supports required. Alieexpress ring:…
""UPDATE GEN 2026: I apologize to anyone who tried this project cause it was missing the power button and the radiator side clear dome. I know it's been some time from my last posts, but life got in between and I got lost in it. If you…
I made a holder for my LED strips from BFT Lightning. In my case, it fits the 24V WS2814 RGBW LED strips with 60 LEDs/m and IP67. The LED tube sits fairly loosely in the holder, but it works well enough for my needs. The bar that holds…
This is a LED Ring housing for LED Ring with 24 LEDs (86mm). Can be used as watch or notification light if powered over 5 Volts(USB) and controlled by ESP8266. Designed with hole for wall mounting. Hold together by a four pin design.…
This is a spacer I made to get the correct spacing for the WS2811 LED light Strings. Make your first 1/2 inch hole in the PVC then Insert the spacer and drill the next hole! Category: DIY
Practical and fast, it allows you to connect several strips together or create simple joints in curves or decorations, the only limit will be your imagination. For their use You will need: Led strips WS2812 1 x fast connector 1 x clip…
Similar to the original but works with generic LED strips instead of the custom PCB. The strips can be up to 14mm wide and is slid in from the back, similar to the diffusor. To mount, choose one of the clips from the original and glue…
Das ist eine Löthilfe für die WS2812B einzeln LEDs https://a.aliexpress.com/_B1ENvk Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black…
This is a clip to hold WS2812 LEDs at a 30 degree angle from a ceiling or wall. The inside of the clip is designed to hold a weatherproofed strip with a silicone sheath measuring about 12.3 x 3.85mm, so any LED strip using such a sheath…
Simple diffuser for the WS2812B-64 Neo-Pixel Led matrix. Print: Material: Generic PLA+ Dimensions(mm): 69.8 x 71.8 x 4.8
