Counting matching models…
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
Taser Dummy with changeable cartridges. i used m5x35 screws and with m5x10x7 Plastc inserts Print Settings Printer Brand: Creality Printer: Ender 3 V2 Supports: Yes Resolution: 0.28 Infill: 10% @ 3 shell, 5 top/bottom Filament: Das…
The original file was two pieces and way to big compared to a real x26. It was a nice model so I modified it to fit my needs. We use it for recruits at police academy for scenario based training. Fits securely in holster. On the .stl file…
Hi It is my wheel to rc car. I was inspired by the Alpine BMW E21 wheels. offset 3mm widht 25mm diameter 52mm hex 12mm I recommend printing on the inside
Custom tire for lego wheel disk. Size of disk is 43x26mm. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2 layer height, 0.8mm nozzle Infill: 0% Filament: PM TPE Black Notes: Printed with 0%…
Tablettenbox für die ganze Woche mit jeweils einem Fach pro Tag, die Box hat einen Durchmesser von 90mm und ist 26mm hoch. Die Box ist mit Magneten 3x2mm versehen https://www.amazon.de/dp/B00TACKU0O Die Box ist komplett mit Magneten…
Remix of https://www.printables.com/model/273343-car-cup-holder-bottle-adapter-nalgene-yeti-rambler/comments with slightly larger ID to hold large Contigo rambler. Closed at the bottom to capture any spillage. With Jaguar XF logo or…
my own creation for hex wall organiser that can be used for holding a blade fuse box or something else
2025.06.10 Update: I re-modeled this as I've learned quite a bit since I first made this. There is now a version without cutouts, because some IKEA KUGGIS boxes don't have them for some reason. --- I needed a Gridfinity insert for the…
The 3D model is used to divide the IKEA KUGGIS box into 3 compartments. This means that several items can be stored there without everything getting mixed up and/or you need several boxes for neat separation. Please leave a like if you…
Hi, I designed these wheels so that my LC Racing is 195mm wide. wheel has very small offset widht 26mm diameter 52mm hex 12mm
A trimmed down version IKEA Kuggis Gridfinity 3x5.
Inlays for the Kuggis 18x26x8 storage box from IKEA The inlay rests on the lower wings from the Kuggis, leaving a bottom pocket for storage as well. Different division versions are available to suit your needs.
This is a tripod mount for the Hadley Telescope Tripod adapter made by Gyoenastaader. I made this to fit my MX1000 tripod, not sure where its from it was my mothers but she isnt using it anymore. I found this prints best upside-down and…
Decided to swap my 2.5" SSD for a faster NVMe version. While not officially supported, the X260 can accept NVMe drives, which improves performance (even 3x fold!) and reduces power consumption (barely, but it does) You can buy the cable…
Design Requirements A simple gridfinity container that holds reusable grocery bags Printing Setup Printed with PETG using a .4 mm nozzle and no supports First Impressions The bags fit Attribution ZackFreedman - Gridfinity gdie - Freecad…
Quadcopter style drone originally designed in 2017 for computer controlled swarm acrobatics. You can't buy the original electronics anymore but upgrading to newer ESCs and flight controllers should be easy. The original cost was < $200…
Little support needed. Normal speed (photos) 8h with original Prusa mini
So, i have this old thinkpad x240, but it's mising it's internal battery and the fact that there is empty space in the otherwise very well specced laptop greatly irritates me. I designed this dummy to fill the void in my thinkpad's heart.…
Custom Wheel design made in Fusion 360… 4 holes for hub connect at 2mm. rim = 41mm dia, 26mm wide.. Standard RC 1/10 size.
no support needed battery connecting boxes check on: https://www.printables.com/model/1119580-26650-battery-connecting-box
Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here: https://www.printables.com/@StudioMechanik/collections/3053772
Dual Super Glue Holder 36x26 (elliptical) for Skadis
All you have to do is cut a ring or two off the big side of the spring, polish the inside of the cap with a dremel and wire brush or sandpaper so said spring makes good contact, then buy whatever 3-5W LED maglite bulbs you want for cheap…
Hexagonal Corner Connector x26 ball for PCV Tubing Type of corner / connector allowing to build a number of bespoke gates for Whoop Drone Racing. Fits 20mm or 22mm PCV Other Drone Accessories here:…
These are organizer boxes that fit into a Rotho Frontbox. Each box includes a slot for a paper label 57x35mm to mark the contnt of the box. Printing woth support structure is required
..I got my hands on a not finished kit of a CubeAnet 8 and thats where all things started... ...having a SecKit Go² I tried to put as much design principles in the mod with the dogma that I wanted to used all the metal parts of the…
The legs with this frame are broken very quickly, i designed and printed simple legs to avoid my ESC being in touch with the ground when langing, soft or hard .... Just use one 3mm screw to attach it through the hole already there. Print…
Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…
This is a mount for a Raspberry Pi and a 26x50mm relais for a JGAurora A5 (but it's really generic, as it's a screw based mount for a flat surface). The idea is that the Pi controls the controller board's power using the relais. Warning:…
I wanted to decorate my planter a little so I designed this cover. It's 26x26cm - so too big for most printers - so it's split in four parts. They are keyd to fit together. Hole in the middle is 5cm in diameter. There's two versions of…
this is a remix for a different bearing size 26 outer diameter 10 inner diameter 10 width also bracket for that and those basic red dual extruders from amazon
Ein Block zur Erhöhung von 26 mm um größe Drehmeißel verwenden zu können. Weitere Upgrade folgen
This model displays the Cannon PowerShot SX260 HS Camera in a cool and stylish way
no support needed battery connecting boxes check on: https://www.printables.com/model/1119580-26650-battery-connecting-box
Friction fit lens cover for a Canon PowerShot SX240 or SX260 digital camera. Designed to be attached with a small keyring to the camera's wrist strap. May or may not be able to pop off on its own when the lens extends. Printing in PLA is…
This model displays the Cannon PowerShot SX260 HS Camera in a cool and stylish way
UPDATE April 23-24, 2024 — Remodeled how the retainer clip is attached, to get better grip strength. This involved a remix of both the chain link and the clip. Version 1.14 and up has this. Also, added two new sets. Original was renamed…
RC 1/10 Alfa GTA rim 46x26mm 12mm HEX with two offsets for tamyia and others. Model is strong and I use it in races with no issues. Please contact me for some custom dimensions if needed. Hope you will like it. Supports recommended inside…
Printed using Kobra Max 11hours in vasemode I used 313gr of Gentlemans Grey Prusament
This is a remix of https://www.thingiverse.com/thing:6835703 since the higher IKEA KUGGIS have bit smaller bottom area. Used in this video: https://www.youtube.com/watch?v=cxt6cw--9_4
A mount for Canon SX260 HS (or SX240) with 30 Gr vibration dumper. I use it on my Tarot FY680 Pro (with 10mm mount) or on DJI F550 Frame (with 12mm mount). You can search on thingiverse for relative tube mount. Category: Camera
This bracket allows you to mount ThermEX to a din rail using Voron PCB din clips. More information about ThermEX can be found here: https://github.com/comradef191/ThermEX/releases/tag/ThermEX26-V1 Voron PCB Din clips can be found here:…
DIY Bearing Press Tool for 17x26mm Bearings (6803/61803) Perfect for workshop and garage use! This custom bearing press tool is specifically designed for installing 17x26mm bearings (6803/61803 type). The tool provides precise, controlled…
The purpose of this model is to help users test the first layer adhesion and thickness precision of their Creality Hi Printer. It can also help clean the build plate. As you can see in the pictures mine needs a little work. I also noticed…
Coupling 5x8x26mm NEMA 17 Stepper Motor Coupling 5x12x26mm NEMA 17 Stepper Motor
I made a 5 reel filament dry box equipped to spool filament directly into my printer. Instead of purchasing commercial ball bearings, I designed a bearing with a 10mm width to allow for reels with differing widths. Each reel rests on 4…
🕯 Samenvatting kaarsenhouder‑ontwerp (3D‑print) Doel: Een minimalistische, stevig staande kaarsenhouder die zo weinig mogelijk filament gebruikt. Belangrijkste specificaties: Binnenruimte voor kaars: 26 × 26 mm (vierkant) Vorm: Simpel,…
A battery holder for 3 X 26650 batteries. I used it to power the RC-Dozer DIY instead of the original 16650 batteries.
Here i have my Voron 0.1 Shelf which uses a Ikea Shelf, i used some Supports under just to give it extra strength. Requires 4 Heat inserts (standard voron ones) 4x 25mm screws 2x Wood screws for the back to hole the plate on. I have…
previous version 1mm is too soft, 1.5mm is better and 5mm hole, about 4x5 after closed cover different cover top, finally figure out how to make the lip, tighten fix
Model of the .22 TCM cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and…
