5,510 models
This cute and simple dinosaur friend makes an excellent desk companion and comes in two different varieties, shorter and longer legs. The difference isn't massive between the two but I thought it would be best to give folks choice. In the…
News 2024-04-10: Please also check out my new Blade Dispenser for this Bed Scraper: This is the XL version of my popular Optimized Bed Scraper with quick-change blades. The cutting edge of the blade is 45 mm, a full 30% longer! Each blade…
Recommended Filaments: PETG: https://amzn.to/45juHZv TPU 72D: https://amzn.to/4l08AMi (for indestructable strength, can print on Bambu AMS) If you think there is still not enough wind, go get an electrical fan please. A hand fan can only…
This minimalist bag clip is a simple, reliable way to seal open coffee bags and keep your beans or grounds fresher for longer. Designed for fast printing with no supports , and strong enough for everyday use. Perfect for coffee bags, tea,…
Collapsible Basket Optimized for 3D printing This basket prints in place as one part and doesn’t require any supports. It prints flat but folds it into a basket! This is a remix of the first collapsing basket I designed, that version uses…
These boxes are specially designed to be printed really fast and also to have as many holes as possible to let the wet air reach the silica-gel inside. The screw cap is an easy and durable way to close the box and also open it again to…
News 2024-04-04: Upon request, I designed an XL version of this scraper with 30% longer blades: News 2024-03-10: Please also check out my new Blade Dispenser for this Bed Scraper: Optimized Bed scraper with replaceable blades Since the…
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
All my photos are REAL and show an actual 3D-printed figure photographed by me. If you're interested in the commercial use of my models, or if you simply like my work and want to support me , please check out my Patreon at…
Don't believe the hype, three horns can be friends with long necks Cera! This cute and simple Triceratops dinosaur friend makes an excellent desk companion, gift for a child, or friend. They are a companion piece to my previous dinosaur…
Normal 3d-printed brackets can easily break if you overtighten the screws. These brackets are specially designed for FDM-3D-printing. Because of their wide surface areas on every layer they can withstand multiple times more force than…
Customized version of https://www.thingiverse.com/thing:2404850 , with added labels on top, to show the grit of sandpaper used. They go from 80 to 3000. If your sandpaper is a different grit, there's a blank top template provided. With…
This Cuban chain model is setup in a fully parameterized fashion, so that you can open it up in Fusion360 and change it to be whatever length or shape you need. Two versions are provided. The spiral approach allows for an impressively…
No more fiddling with resting your phone against random objects when bored on a flight of cafe after realizing you don't have a phone stand with you. Credit-card sized and ultra-thin to fit in any wallet. PS: only works with the phone in…
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And I noticed that there's already a few people making various smaller or tiny printable versions. But what if you could pick out the exact size that you wanted? Maybe…
UPDATE 25.2.2022: check out my lego duplo BRIDGE ! https://www.prusaprinters.org/prints/137837-set-lego-duplo-train-bridges-optimized UPDATE 11.2.2022: added 0.3mm layer height gcode files for all tracks → faster prints , still looking…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
More durable than it looks. No support required.
This Project is Outdated! For the latest Revisions check out: Stackable Storage Boxes – 2024 Update The following description is no longer updated: Discover my specially designed storage boxes, meticulously optimized for 3D printing.…
Important! The multicolor version is not designed to be printed in separate pieces and later assembled. If you don't have access to a multi-material capable setup (MMU, AMS unit or similar), please avoid printing the multicolor version of…
A great deal of care must go into a design before there’s nothing left to optimize. I think we can all agree that Zack Friedman’s Gridfinity system has become a benchmark for organizational systems across sharing platforms. However, every…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Please don't forget to like - I want my Prusameters! 😄 What's new? New Process Preset: 50mms FINE , prints with 0.10 mm layer height. All first layer speeds set to 40mm/s , to make the presets work universal out of the box. If everything…
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
Printing I printed these in white PETG at 0.2 mm for both the mount and diffuser and it works great. The diffuser is printed flat, and it's thin enough to bend into the curve that's shown. I tried transparent PETG for the diffuser, but…
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
Not a new idea, but this is my take. I love these little boxes! I keep a dozen or so printed in various colors at all times just in case you need to thank someone. We display them around the house at Christmas as decorations, so there's…
A Minimalist Skeletonized Dagger. The Finger whole is the average male ring size of 20mm diameter. Scale model as needed using your ring size in the chart below. Ring Size (US) Diameter (mm) Scale Factor 5 15.7 0.785 or 78.5% 6 16.5 0.825…
3D Printable Screw Generator for Fusion 360 This is a fully editable Fusion 360 file designed to generate screws specifically optimized for 3D printing. Most standard metric threads are designed for metal manufacturing, not for FDM…
Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…
A modern take on a simple container with a screw top lid, that utilizes a threading style similar to a mason jar - making for an easy print, nice feel, and smooth use. A great accessory for stylishly organizing things in your bathroom,…
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
This is a model of the motorized carriage 810 commonly used by the czech railways. The model size is H0 (1:87), suitable as a wagon or motorized carriage for model railways. Read more at…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
I printed in PLA Infill: 15% Layer Height: 0.10mm Supports: Yes, organic If you like my work consider Buy me a coffee 😊
This is a fairly simple model of a larger-than-life bolt and matching nut. I created this as a piece of shelf art and it's pretty fun to just play with, but there's also a hidden compartment inside the bolt. Could be a great place to hide…
I have seen a lot of print in place hinges but the ones I have tried have not been optimized for 3D printing. That's not to say there are not any out there, I just haven't found any myself. If you look at the cutaways for this, you will…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
I designed an accurately sized 1x1 Lego stud and then blew it up to 6x the normal size to use them as wall hooks. There are two versions: Stud with threads to match the mounting stud Stud with no thread that can fit over an equally scaled…
I printed mine in PLA, it's easy enough to snap the pieces out with hand and clean off the knobs with a pocket knife if you want to. EDIT: removed the tight variant, as it proved to be too tight
DO NOT SELL MY MODEL (PHISICAL INCLUDED). RESPECT THE TIME THAT I CONTRIBUTED TO CREATE THIS MODEL. MODEL UNDER LICENSED UNDER Creative Commons—Attribution—Noncommercial—No Derivatives…
Mini garage diorama to display your 1/64 diecasts especially designed for FDM printing. Everything prints fine, and is designed in fonction of layer heights and widths. Modular, very easy to print, this one requires no supports at all!!…
Release of the 2021 version (v4) Completely redesigned from scratch but kept most of the v3 design. I've done some extensive testing on all parts and the complete assembly so I suppose it would be fine to print. However if you experience…
this is a perfect gadget for your wallet. If you need a knife or a fork in your brake or maybe a toothpick, this can be very helpful. Needs only 2.1m with 100% infill
Pill organizer / vitamin reminder with a labeled slot for each day of the week. To use, loosen the screw 1 turn and twist the lid to the current day. The lid & screw are fully removable to refill the container at the end of the week. To…
Model of Jeff Koonss Ballon Dog. I recommend for FDM printing to print the model splitted in left and right half. So that there are no or only a few supports needed. The two halfs can now be connected with the feather keys. The keys have…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
A remix of the "Credit card sized foldable mobile stand" by fns720, see https://www.printables.com/model/59615-credit-card-sized-foldable-mobile-stand Main purpose of the remix was twofold: to make it possible to set the phone to a more…
After printing both versions of the center case that supported the addition of the hydrometer, I realized that while the second case looked better aesthetically it did not function well due to the lack of airflow around the unit. Remixed…
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…
Box for store, lighters, filters, joints, pills or the stuff you need if is inside the size restrictions. 😅 To complete the assembly you need 4 screws M2 x 10mm and M2 x 20mm (Front and Back) maybe the screws can be replaced with…
While learning to use Autodesk Generative Design in Fusion 360 I needed a sample part to test the workflow and decided the Prusament PET-G Clamp could use some optimization. I based the dimensions on the original Prusament PET-G Clamp so…
This is a remix of Jonathan's great foldable mobile stand. Mine is a bit thicker and the dimensions are matching with the standard credit card (=85.6x54.0 mm). The model is pre-assembled. Depending on the calibration of your printer some…
This 3D-printable Moai head brings a touch of ancient mystery to your shelf, desk, or planter. I sculpted this version with simplified angles and a stylized silhouette to give it a clean, print-friendly profile while preserving the iconic…
This model is ideologically based on the line Crochet tension ring Crochet Ring Crochet Ring (parameterized) New ideas have been incorporated into the model and the result feels significantly different. Printing recommendations:…
This is a customizable silverware holder that fits your specific silverware like a glove. No more sloppy generic buckets. As an added feature, it can stack with other gridfinity modules to make even better use of the drawer space. Note:…
I found that cat Smartphone holder on thingiverse but I had some issues during the first print so I decided to modify the model for better printing. I modified the contact points of the cat's head and belly to the base plate so that there…
We are soon launching a KICKSTARTER ! Assembly documentation can be found here: https://outofmarbles.com/pages/docs You can also purchase a Hardware Kit for our Marble Machines. It will come in handy if you do not want to source the parts…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
My first attempt at iPhone 15 case. My daughter got a new phone, and the case (ordered online) was not due to arrive for a couple of days. I had a reel of flexible PLA, and figured that I could print one. But I couldn't find any existing…
All swords are sectioned for a minimum print volume of 250mm cubed. they can be scaled down if needed. will require glue and either an AMS or some painting. Visit this link for the wall rack and nameplates -…
I needed v-slot rail covers and wanted to be able to customize the lengths so I could work around my other upgrades. My design goals were: Flush top with the v-slot rail (others either extended over the top or were recessed into the rail)…
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
Meet Pluto, the tiniest doggo with a big heart and floppy ears full of charm! This little buddy prints fast, with just a few supports, and brings a burst of cuteness to any desk, shelf or keychain collection. Faithful, round, and…
2024_05_28 Newer version of these files is located here. Old files still work fine and are still posted here. works with customizer and has more options for editing pre-entered data so only have to turn unwanted holes off. easier to turn…
History This part is actually a redesign of a surplus part to my magic strap buckle: https://www.prusaprinters.org/prints/84848-magic-strap-buckle-magnetic I got some feedback from a user that was very happy with the buckle, but had…
a stand designed for iPhone magsafe system. This is an application of topology optimization printed in nylon without sup
This is the 2024 update of my storage boxes system, with the latest revisions (D, E) of the storage boxes. For the older revisions, please have a look here . Discover my specially designed storage boxes, meticulously optimized for 3D…
This is a fast printing, fully parameterized cardboard style box. Why I did this I made this because I hated to print forever when I needed a little box, like a gift box or a container for srews or whatnot. This model is only 2 layers…
IMPORTANT: PrusaSlicer thinks some of these keycaps used inches. This is incorrect. Tell it “no” if it asks about that (but say “yes” to multi-material). I included screenshots of the correct responses to these pop-up dialogs if you look…
Here's my take on a fairly popular paracord tensioner. Simply tie a knot in the middle-sized hole, then loop a bight of rope through the large hole and around the small. (See pics for details) Check out my other rope tensioners! Rope…
There are a few trash cans out there. I though i'd make my own. Printing Print the Trash Can right side up in "Vase Mode" with a Extrusion Width of .8mm with a .4mm nozzle diameter For the Lid print right side up with strips drawn with…
In the original model there were several wall protrusions that I fixed, and I changed the number of hot ends (4x) and slots. I printed with 0.2 layer height, 2x walls, 4x bottom, 4x top, with 15% gyroid infill using Inland PLA Tough. Let…
A special feature of this stand card is the absence of mechanical hinges. They are replaced by a composite of two types of plastic. This allowed us to achieve the minimum thickness and print time (30 minutes). The stand is convenient to…
Why use a thread optimized for 3D printing? Little screws are ideal to assemble multiple parts of 3D designs and to mount them to your workbench. (For example this tape dispenser or this angle bevel ). But smaller standard threads, like…
This ring is a full remake of the Crochet Ring originally uploaded by @Milan . After using the original for a short while, my wife asked for a few changes. Specifically, she requested (1) a taller guide rail at the base of the ring and…
Steve5092 made a pretty good tripod, but his sleek design also needs more supports. Since I gave away my old one, and had to print a new I thought I'd make one with flat sides so it's easier to print.
f you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Das ist ein optimierter Looping, dessen Einlauf an die Steigung der Schiene angepasst wurde. Somit ist es möglich mit einer Standardschiene und 4,5cm oder 5cm Höhensteinen, eine Kugel durch den Looping zu schicken. Wenn die Kugel mit…
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
Designed as a small container to slip into a pocket, this box slides open to show a space the area of a playing card. It latches in the fully closed position, and again in the fully open. A small bump in the lid indicates which way should…
Now you can get the Gridfinity Carousel with 100% more motors and gears! The design is based on the Bookwheel mechanism by Agostino Ramelli. The Carousel has a total of 50 Gridfinity squares and can fit bins up to 7 units tall (49 mm),…
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
Starting from the original model → https://www.printables.com/model/207534-card-sized-knife-fork-toothpick-kit/comments published by Ruben Martins I wanted to add a spoon to the kit I designed it using Fusion 360 and printed it in white…
I've always wanted a real sized pokeball I could hold in my hand. And now I have one! This is a life sized Pokeball I designed. It's a 1:1 scale as shown in the shows. Regardless of what the slicer says, every single part can be printed…
no support no bridging stronger design there are two sizes: 34x34x20mm 34x34x40mm print time around 20min
4mm Thread Pitch, custom thread design that I used to better understand threads and bolting. Rather than try to copy a thread pitch optimized for other manufacturing methods I put some thought into optimizing for FDM printers. When I…
This 100% 3D-printed mechanical solar system includes all eight planets, designed with custom gear ratios to precisely reflect their true relative orbital periods. To make the model practical in size, both the planets' physical sizes and…
Update: I've released a completely reworked version of this design which comes with a whole host of improvements. Check it out here: https://www.printables.com/model/912094-motorized-escalator-model-redux This is a motorized version of my…
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Remix of the original Bambu Lab reusable spool. Reduced the material used for the side walls to a minimum while keeping overall strength and rigidity resulting in ~20-25% less print time and material usage. With the open design you can…
Style and Function This little case was a hobby project of mine. Created using Onshape, all of the hinges, clasps and specialized storage fasteners were carefully designed, printed, tested and iterated multiple times in order to optimize…
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
—— QA: Q: Why did i make all models free? A: The simple reason is Copyright issues. I am not allowed to make any money on Copyrighted material. ——— Q: Who made all the models? A: The models are made by several people, including myself. I…
Added additional 3d depth, color and kit card format
![Balloon Dog (Jeff Koons) [nose optimized]](https://media.printables.com/media/prints/183944/images/1715089_20aa92c1-f8b6-4628-92fc-baf32f35074a/7dc6d277ea6457384cbfc7a73bb1977a_display_large_18.jpg)
