Counting matching models…
These are cases for the VGA or HDMI version of the ZX Murmulator ZX Spectrum emulator PCB. I made it from a generic case design imported into TinkerCad and very extensively modified by scaleing and adding components and cutouts to fit the…
Kawasaki Ninja ZX-6R Superbike Wall Art Silhouette model. Adjustable size. I accept model suggestions.
This holder is for ZX Spectrum+ or ZX Spectrum 128k+ (toastrack), ZX Spectrum 128k +2. Print instructions For gcode file: Filament 1 - black Filament 2 - blue Filament 3 - green Filament 4 - yellow Filament 5 - red
Surfchamp was a game for the Commodore 64 and Spectrum 48K, released in 1987. It came with a plastic surfboard which turned your keyboard into a surf controller. Unfortunately it didn't do very well, it's quite rare and even rarer to find…
Case for K-Mouse Turbo 2017-LP mouse and joystick interface for the ZX Spectrum. Contains case, cover and reset button.
The cam-latch closure on my original rugged box is still the toughest 3D printed box closure of all, but I know snap closures are convenient too. I made this extra tough snap closure, which will not break because it doesn't rely on layer…
This is a rugged box with hinges and latches. It can be made waterproof by printing a seal in flexible filament, such as TPU, or by cutting a large 2mm thick o-ring to the appropriate length. (There is also a version without the seal…
This part is mainly made to test a printers frame for axes perpendicularity. If your printer is built without checking you can get odd shaped prints. Parts that need dimensional accuracy depend on a correctly built printer. XZXY - main…
Comes in 4 pieces, split STL to objects in prusa slicer. There's a 0.5mm gap between parts; mask back panel, snap pieces into back panel, and fill gaps w/ JB-Weld or similar. This is to allow everything to fit on the bed and account for…
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
I was born all the way back in 1977 and when I was a teenager Adidas released the Torsion ZX8000 Aqua and I still remember the day when my mom got me these awesome shoes. I don't know why but since my 30's I started to think about the…
Nissan 300ZX (Z31) Assembly required. Can be printed separately Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of…
Please drop a ❤ if you like this project! Why This One? Because it's tailored for those ridiculously cheap credit card USBs, which qualifies them for popular giveaway goodies - so very likely you already have one lying around! They are…
Make oil changes less messy on the Kawasaki ZX6R 636. You can easily remove the filter with funnel in place.
Support for IPS 3.5 Health monitor Screen from Turing Turzx infill : 15% No support
My friend needed extra HDD/SSD trays, as his (bought used) NZXT H440 computer case only came with one. So, I measured the original and made this to fit the tray slots in the case. Fits both 2.5" and 3.5" disks. It's available in three…
An accurate as possible ZX80 housing. Original made by 'alvaroalea' ( https://www.thingiverse.com/thing:1880449 ). Modified to be printable on a standard 3D printer. Updated January 2022: All walls now have a minimum thickness of 1.5 mm.…
The rotating joint/hinge on my Sony MDR-ZX770BN Bluetooth headphones broke on both sides. This piece attaches on both sides of the ear-cup hinge, encapsulates the existing, broken axle and puts a new one on top. Installation: Move the…
My GPU was suffocating inside my H510 Elite, so I created a front and side panel for better airflow. Air filters coming soon.
Replacement case & key caps for the ZX Spectrum 48k to use with a mechanical keyboard PCB ( https://www.pcbway.com/project/shareproject/ZX_Spectrum_Keyboard.html ). Saves having to cut an original case. *added a second version with…
Copy of my retro Display Stands listing as for some weird reason that one isn't showing up. Covers: ZX81 ZX Spectrum 16/48k Rubber Key ZX Spectrum + 48/128k toastrack ZX Spectrum +2/+2AB ZX Spectrum +3 with and without Gotek (extra 5mm on…
printed in TPU, the softer the better, ninjaflex is a good choice, i did make the gormmets pretty “thick” its still not %100 but its pretty damn close
The ZX81 was my first computer, many hours were spent playing games like 3d Monster Maze and others, and typing in games from magazines then losing it all due to ram pack wobble, but it still holds a place in my heart that I just can't…
I wanted a bracket so I could mount fans in the back of my NZXT H1 case without them being visible while still being able to use the exiting back panel. Since I couldn't find anything quite what I wanted I designed my own. This should…
Da bei meinem Intex ZX300 Poolsauger nach jeder Saison der Antriebsriemen für die Reinigungsbürste das Zeitliche segnet und man von Intex keinen Ersatz dafür bekommt habe ich mal einen Riemen mit dickerem ‘Rücken’ gezeichnet und in TPU…
Print using PLA or PETG. Add a M4 screw with butterfly nut. For the centering pin I used a 3mm old drill bit which I cut to size (about 10 mm) and inserted to the base by heating it first. You can view the Onshape design at…
This is a revision version of the Mechtrum ZX Spectrum with a mechanical keyboard. I have designed a new keyboard PCB to make use of the Wraith Keycaps found on Aliexpress…
NZXT cases have a unique and clean look. But most of them, including the H210, have bad airflow with the stock front panel. This model solves this issue and will make your PC breathe a ton of fresh air ! It fit perfectly on the case just…
NZXT H7 COVER BOTTOM FRONT
This design is a remix from Lee Smith's ZX Mechtrum case. Uploaded my remix here with his permission. https://leesmithsworkshop.co.uk/products/zx-mechtrum-3d-files-digital-download It is a case for the ZX81Plus38 with cherry-type switches…
Update: *2021-01-09 : Added 10mm, 25mm, and 29mm spacers with a different socket configuration (labeled mk II). This new configuration might work better depending on your printer tolerances. The 29mm spacer gives more room for fans on the…
I've uploaded a v2 model which can be printed on larger bed printers ( 1308198-zx-spectrum-2ab-replacement-case-v2 ) Replacement case for the ZX Spectrum +2A/B (Amstrad black model). Case is narrower than the original due to the tape…
This is a complete printable case design for the ZX81+38 replica board and the ZX81 Tactile Keyboard . For those who are interested in just the keybaord, the design files for an "external keyboard" are included as well. See my blog post…
Holder anti-sag for RTX 4070 Gaming OC Gigabyte graphics card to prevent pcb cracking issues or especially when the PC is being transported. Printed on X1C Bambu lab, no support, 0.20, 3 walls, 25% Gyroide density. You'll need two M3x5mm…
Sport motorcycle inspired miniature designed for clean and stable 3D printing. The model focuses on aggressive modern sport-bike styling while keeping geometry optimized for easy printing without supports. Perfect for desk display,…
If you own a Retroleum SmartCard V2 or V3.1 from Phil ( http://blog.retroleum.co.uk/smart-card-for-zx-spectrum/ ) you may look for a nice case. There is one case available from Johan at https://github.com/SM7I/SmartCardv2 , but it doesn't…
This is a simple frame for the ByteDelight ZX Diag Cart for the Sinclair ZX Spectrum. I didn't want to use the rubber feet, but preferred something that was looking a bit more professional. 😉 The diag cart is just clipped into the frame.…
Belt for intex robot ZX300,Print to Anycubic 4Max, Couche: 0.15 Temp: 215°C Bed: 0°C Speed: 15mm/s First Layer: 10mm/s Speed Outer Wall: 7mm/s Speed internal Wall: 10mm/s Print Settings Printer brand: Anycubic Printer: Semi-closed 4Max…
A sleek version of Daymo's NZXT Kraken Cable Comb (3580218). Slimmed it and added chamfers, designed with 0 tolerance sand/file/scale tongue to fit. at some point I'll return and mark it as an actual remix once thingiverse works again.…
This is a replacement power button for the NZXT Phantom 410 case.
An airduct/scoop to fill up the hole in the NZXT H7 Flow. The scoop directs the air from the front fans towards the GPU. This duct is specifically designed to work with 140mm fans. It bolts through the air duct into the 140mm fan as shown…
These models are not mine I just uploaded it to printables because I thought others might search for something like this. Notes from the creator: I use superglue to assemble ill add a picture so you can see where everything goes I use…
Moved one of the included 120mm NZXT fans from the h510 case to the bottom. Designed this adapter so it can lock into the holes at the bottom of the interior. They pressure fit into place (for removal I recommend pushing from underneath…
The AI3M is an excellent entry level 3d printer. It has a rigid mainframe, a very good heat bed, decent electronics, a good display with touchscreen and a low acquisition price. The main weak points are the unreliable hot-end assembly,…
Just a simple logo swap from Corsair ship logo to NZXT text logo.
Not sure exactly how this idea came to my mind, but hexagons look cool and I thought why not design some that click into the front of my PC case! The designs and colors you can add to the front of your PC are limited only by your…
This is my take on the NZXT "Puck" style cable organizer. This is designed to coil a headphone cable or VR headset tether inside the channel and hang the headset or headphones over the outside of the cube. Print instructions This print…
I recently built a computer in an NZXT H210 mITX case and it has a spot for a single 3.5" HDD on the bottom. The room in the case allows for another 3.5" HDD on top of it without any clearance issues. I would imagine this would work in…
Feet extension for NZXT H510 case. No specific print instructions required, i did mine at 100% and PETG for strength and heat resistance.
Supporting the Gigabyte 4090 Gaming OC in the NZXT H7 Flow is tricky. The support that came with the GPU did not fit in this case because of the cable cover. I used the 2 threaded extrusions that hold a cable tray on the back of a case to…
Simple keyboard overlay for the 48k rubber key model. I had some of these back in the day and they are useful for adding labels above keys for simulation games (Elite, Gunship etc...) or business software with lots of keys. Two versions…
Fully replacement for Sony MDR-ZX770BN hinge. This is left-side par, for other side please make a mirror one.
driver's seat drive gear Toyota (LEXUS) JZX90, JZX100, JZX110, MARK-X Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.16 Infill: 100% Filament: НИТ ABS Black Category: Other
The magnets used are 6mm X 1mm Printed face down and superglue together I have added the f3d,step and 3mf files Hope it helps
Case for my ZX PicoMD SInclair ZX Spectrum Microdrive Hardware Emulator Details - https://github.com/TomDDG/ZXPicoMD/ Note there are two versions of the top: ZXPicoMD_top.stl is for an OLED size of 27.5mm x 27.5mm. ZXPicoMD_top_26x26.stl…
A Gotek USB Floppy Emulator Caddy that fits systems that have an internal 3 inch disk drive such as the ZX Spectrum +3 and Amstrad CPC6128, 664 & the external drive enclosure FD-1. The front plate has holes for the standard gotek board…
I bought this "MaxDuino" board on eBay. It emulates a tape player for retro-computing. As I intend to use the board for my Acorn machines, it was modified to support Motor Control via the 3.5mm stereo plug. Design I used Fusion 360 to…
For a complet set you need 1 Wall mount for caulking gun 3 tube holder 1 wallmount for push knobs 3 wallmount for nozles Happy printing :D
This is an updated version of my original replacement case for the ZX Spectrum +2A/B (ZX Spectrum +2A/B Replacement Case by TomDD | Download free STL model | Printables.com) . To accommodate printing on new larger-bed printers, I am using…
Case for TZXDuino sold by MyRetroStore. This case is designed specifically for the TZXDuino unit sold by MyRetroStore: Website: https://myretrostore.co.uk eBay store https://www.ebay.co.uk/str/myretrostoreuk I have no connection to…
i designed a front panel for the NZXT H400 and H400i. It mounts on the existing bracket that hold the original metal panel to the case. You will have to cut the opening on the bracket, i used a dremel (see pic 2) PS: it's my first model…
This is a replacement front panel for the H510 Elite from NZXT. This is a great case, and a cheap case at that! The single biggest issue is the entire front of the case is a glass panel. Read entire Instructions to see DIY steps, don't…
I needed a second tray for my NZXT 710 case but it'll probably work with other NZXT cases. I this should snap in without the need for the screw but it does have a hole for it. I would recommend screwing it down if you're using an HDD but…
Complete computer design for the ZX-Spectrum Harlequin motherboard (keyboard, case). https://grabcad.com/library/zx-spectrum-harlequin-computer-1 Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: Yes…
This design is compatible with any raspberry 4 and 3, and an AK33 mechanical keyboard. I included the design complete for large printers, and splitted in two for regular ones. Fan is 40mm in diameter. Print Settings Printer Brand:…
I found these hilarious feet models for a PC tower by pacypo and began making some. Then it dawned on me that I recently bought some TPU as I just got a new direct drive Neptune 4 printer (awesome printer BTW, would highly recommend) and…
Adapter for connecting the pool vacuum cleaner to the sump pump. Use brim, no supports needed. If you print from ABS you need to specify a scale of 102% to compensate for shrinkage. tpu_ring.stl print from TPU or find a suitable rubber…
Replace the original membrane keyboard with the far more functional mechanical keyboard by iNimbleSloth and my addition of a replacement case and keycaps. The case and keycaps attempt to capture the overall feel of the original ZX81,…
Simple tube comb for NZXT Kraken AIO with 11 mm tube diameter.
ZX Spectrum inspired key caps for the cheap TeckNet X 315 ultra slim wireless Mini keyboard. The project uses manual multi-colored print, so you can print it on a standard Prusa without an MMU3 unit. It requires: TeckNet X 315 ultra slim…
Printing recommendations Print with 0.2mm or 0.3mm layer height and at least 3 walls and 4 or 5 top and bottom layers. I recommend at least 30% infill. After printing remove the slots support wall (integrated in the design) as shown in…
Simple keyboard cap/cover for the ZX Spectrum Next to keep the dust out of the keys. The cover fits snug on top of the keys only as my printer is not big enough to print a full case dust cover so this was a good compromise. The design has…
I noticed that the PCIe slot cover on my NZXT H510 Flow PC Case did not sit flush with the case so I'm using this model instead. The .3mf file contains four variations of the cover. There is a solid cover and three patterned/mesh covers…
Elevate your NZXT H1 V2 gaming experience with this custom-designed PSU replacement cover! This innovative 3D-printed accessory not only replaces the original PSU cover but also adds functionality and aesthetics to your build. With this…
Replacement fan grill for NZXT H1 radiator fan or really any 140mm fan. Just in case you accidentally send yours back to NZXT during RMA.
Insert for a 48k ZX Spectrum to hold a Raspberry Pi 3A+ for the ZXBaremulator Mini Emulator (https://zxmini.speccy.org/en/index.html). Space for two PCBs so you can hook up a real keyboard. It is a very tight fit especially at the back…
Printed in PLA at 0.12 and worked well
ZX4R/RR ZX25R 3D printable wall art. Lines are not perfect as it is hand drawn. About 3 passes thick on a 0.4mm nozzle
Anti sag brace for the NZXT H700/H700i
To connect an Intex Vacuum ZX300 over pressure valve to a male threaded inlet or return (mine 57.40mm / 59.50 mm). The ZX300 part is designed by fbruecken with this design The male part is designed by myself
Inspired by some of the LCD mods on Reddit/SFFPC for the NZXT, I gave this LCD mod a crack and it worked out pretty well. You need the 3 prints.. one's the back plate, and two brackets to hold the screen in place. The screen i used was…
TranzX button replacement for the DP15 Print 100% in TPU with supports Cylinder are in PLA Should be glued in place
This is an adaptor for putting a 3" air filter onto a factory 300ZX Z32 N/A MAF sensor. I'm unsure if the TT uses the same MAF dimensions. Screw in version has a 7mm hole, mainly designed for using 6mm bolts and nuts, but I may make one…
Foot for NZXT H-series case. Has recess for existing rubber mat. Modelled in Fusion360. Prints without supports.
Replacement Earclip for my Sennheiser bluetooth headset. First print of my new assembled MK3S.
Simple dust cover for the ZX Spectrum Rubber Key Model. Has inserts for the keys so it fits nice and snug on top. I did give it a little bit of play so it isn't a super tight fit, this should help when printed on different printers or…
It's apapter for holding NZXT Kraken cooling system for NZXT H510 PC case when You lost or broke original holder plate Printed without supports, 0,2mm layer height, PLA probably PET-G would be better for heat resistance
There are two versions. With and without LED lighting. For all common keyboard switches
One of my first designs and main reasons to want a 3D printer. I tried to find this piece everywhere I could. Even tried contacting Sony trough an official repair store. The only offer I got was about the whole headband for 50€. Since I…
Designed a GPU bracket that attaches inside the NZXT h510. It locks in behind the cable cover. This is originally designed for the Aorus Master 3070ti, a very large GPU. Feel free to remix as needed.
This great sub-sat system requires a print area of 200x200mm for the subwoofer, and slightly less for the satellites. These use sealed speaker modules from Tang Band; the full range T1-2121SD in the satellites, and the T2-2181SA subwoofer…
1993 nissan 300 zx cup holder
The Sinclair ZX Spectrum, released in 1982, was the first ‘home computer’ for many and was without doubt the kickstarter for the UK's now massive Game Development industry. Retro Games have caputured the essense of that legendary machine…
Adpater a Intex Vacuum ZX300 over pressure valve to a male threaded inlet or return: 52 mm. The original ZX300 part has been designed by fbruecken Printed with Prusament PETG filament. Works pretty good.
Print in PET(G) or ABS/ASA for heat resistance. This specific chassis gets hot; feel the glass after a bench! Normal settings otherwise. Hope this helps someone!
Just a simple replacement bracket for the NZXT H440 case. I saw that someone was needing one over on Reddit/hardwareswap and I have an H440 readily available so I figured it would be great practice modeling plus it is always nice to add…
