Chengdu J-20 Seperate Dual Color + Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the Chengdu J-20 from JackTheTinkerer (go check out their profile), so thanks :).
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 145
- Wydruki
- 0
- Wyświetlenia
- 677
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution — Share Alike
This is a remix of the Chengdu J-20 from JackTheTinkerer (go check out their profile), so thanks :).
I made the cockpit, engine nozzles and nosecone a seperate part that can be assembled using CA glue so you can print it in a different color (like what I did).
Most of the parts will need supports (especially the fuselage+wings), but you can try to find a good orientation to print the other parts to minimize support usage. It also comes with a stand, which does not need supports, although you can sandpaper the peg of the stand as the tolerances might be different depending on your printer.
Thank you and makes are very appreciated!