Outlet Box/Bracket - 1 Gang, Low Voltage, Open Back
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open-back outlet box or mounting bracket designed for low-voltage devices in an existing wall
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 272
- Wydruki
- 4
- Wyświetlenia
- 1006
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is for a open-back outlet box or mounting bracket designed for low-voltage devices in an existing wall such as Ethernet, TV, audio or telephone. This box should not be used for 120 volt or 240 volt outlets. This box clamps to the existing walls using the 3D printed levers and does not require mounting to existing 2x4 or 2x6 wall framing lumber. This box can accommodate walls up to 1 inch thick.
The box has 4 small holes that can be used to mark the wall opening or corners of wall cutout. Also, included is an option template that can be used to mark the wall cutout. Inside perimeter of the template marks the cutout. When marking the wall for cutout, insure that there is no 2x4 framing lumber directly behind the cutout area.
The box requires two #6 pan-head sheet metal screws that are at least 1 ¼ inches long for up to ¾ ich wall thickness such as a Home Depot Everbilt model 801011. 1 ½ or 1 5/8 inches is required for thicker walls.
I printed in PETG however PETG, ASA or ABS would be good choices for a durable long-life product. I would not recommend PLA. I printed with 5 wall loops and 25% infill for strength. The assembly requires 1 Outlet Box, 2 outlet box levers and 2 #6 screws. Screw the machine screws into the 2 levers several times to cut in threads before fully assembling.
The outlet box works well with the following Ethernet Wall Plate:
https://www.printables.com/model/1019043-ethernet-outlet-plate-for-keystone-ethernet-couple