1 / 3
H0 Tunnel Portal / Wooden Rails like Brio/Ikea 1:87 — zdjęcie 1
1 / 3

H0 Tunnel Portal / Wooden Rails like Brio/Ikea 1:87

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,09 € – 0,11 € netto (bez VAT)

Dla pliku: H0 Tunnel-Tunnel Verbindungsstift_0.4n_0.2mm_PLA_MK4ISMMU3_7m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,10 € netto (środek widełek).

Masa podana przez autora
1 g
Czas druku podany przez autora
6,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

H0 Tunnel Portal with small windows and without windows, connectable with connectors. Tunnel fits Wooden Rails.

Ocena
0 / 5
Polubienia
22
Pobrania
105
Wydruki
0
Wyświetlenia
672
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a tunnel portal (tunnel door) for the existing tunnel elements. It can be connected with the given connectors. It is symmetrical. 

Connecting two tunnel portals creates a micro-tunnel.

H0 Tunnel 1:87 works for Märklin C-Gleis and other brands like Roco, Fleischmann, Piko. H0 Tunnel, single track, with small windows and without windows, connectable with connectors. Length of the tunnel is 195mm (~7.7in). Caution: It is not usable for active overhead contact line.

The Tunnel also fits wooden rails like those from Brio and Ikea.

Settings

Value

Infill

5% (adaptive cubic)

Perimeters

2

Layer Height

0.2 mm

Material

PETG / PLA

Supporting Material

none / only overhangs / organic

Comments

printed on MK4 with MMU3 FW6.1.3

Ironing

no (not needed, but creates a cleaner surface)

Feedback is welcome.

Share your makes!

Tagi