Magsafe Charger Stand For iPhone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print your own Magsafe stand! Charge in portrait or landscape. Works with Standby mode.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 121
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Elegant Magsafe stand for easy printing. Minimalist design complements your Apple charger.
Idea
My take on the Twelve South Forté: a minimalist Magsafe stand optimized for printing and StandBy mode. I actually started design this for me and later discovered there already was something like this here. I upload it anyways since it has some differences.
Printing instructions
The single version just prints on its base. For the two parted version I recomment using a brim for the head
Assembly
Route the cable through all the parts and push the charging pad into its socket.
For the two part version align the head 90 degrees to the base and twist it clockwise into the base. For the last bit there shout be snap that will lock it in place
