1 / 10
Parametric Button Cap for 7x7 / 8x8mm Push Button Switch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variety of button caps for those square PCB push button switches used in small projects.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 645
- Wydruki
- 1
- Wyświetlenia
- 2581
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (35)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (66)Powiązane
Features
- A variety of button caps for square 7x7 / 8x8 / 8.5x8.5mm PCB push button switches
- Works with any switch with a 2x3mm square mount, either friction-fit or glued in place
- Choose from various shapes & sizes, or make your own with the included .f3d file
- Tolerances are adjustable to allow for a snap-fit on any printer
Parts Needed
Printing Guidelines
- Layer height: 0.2mm
Supports: No
Brim: No
Walls: 3+
Infill: 10%+
Notes on Parameters:
- Parameters can be edited to any value, but very small or large numbers might result in errors or clipping:
diameter: The diameter of the button (for polygons, this uses Fusion's 'Inscribed Polygon' function; for square, this is the length of each side)
tolerance: The tolerance added to the 3x2mm mounting hole
height: The height of the button cap
fillet: Rounds off the top of the button to minimise sharp edges or create a domed effect
polygonFillet: Rounds off the sides of the polygons to avoid sharp edges
domeSquishFactor: Dome only - how much the button is compressed. Lower values = more squishing
domeDiameter: Dome only - the diameter of the sphere used to make the button (also affects the height)