Filament Spool Honeycomb Wall Mount/Holder/Rack - VAROE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount with some needed dowels (22-24mm) for your 1 kg filament spools.
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1064
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model needs to be used with dowels. The holes of the mount are having 24mm and should fit 22mm & 23mm of (wooden) dowels (like in my case).
If there are a lot of wished for a certain measurement i can adapt it aswell :)
I recommend it printing with some more infill (40%+) and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.
If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.