1 / 4
Filament Spool Honeycomb Wall Mount/Holder/Rack - VAROE
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount with some needed dowels (22-24mm) for your 1 kg filament spools.
- Rating
- 0 / 5
- Likes
- 26
- Downloads
- 137
- Makes
- 0
- Views
- 1,064
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model needs to be used with dowels. The holes of the mount are having 24mm and should fit 22mm & 23mm of (wooden) dowels (like in my case).
If there are a lot of wished for a certain measurement i can adapt it aswell :)
I recommend it printing with some more infill (40%+) and maybe thougher materials. Maybe you have to check on your own. In any case just use more of the mounts inbetween of a dowel.
If it's very close and the dowels are barely not fitting - just use a little sanding paper and sand down the holes.
Tags
shelfspoolorganizerorganiserfilamentstandspoolholderfilamentspoolholderwallmountstoragestoragesystemspoolmountfilamentspoolhoneycombworkshopwoodworkingwoodsortingrackorganizationgaragemanagementspoolsfilamentholderwallmountedrackmountorganizeroomwallhangershelfbracketshelfmountorganisationwallartgarageorganizationwoodenorganizerssorterspooladapterwalldecorationvoronworkshoporganiserhoneycombstorageworkshoporganizationbambuhoneycombstoragewallhoneycombwallbambulab