SteelSeries Arctis Pro Repair Broken Bracket Fix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A easy fix for a cracked SteelSeries Arctis Pro & Wireless.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 572
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello,
i own a Steelseries Arctis Pro Wireless. After about 5 years i discovered a small crack on the right side near the bracket where the rubber band is inserted. I tried to glue it with special plastic glue, but unfortunately this didn't work because there was too much tension on the spot.
@Bradacook_78138 has already created a fix for it. However, it was too rudimentary for me. So I designed the whole thing a bit narrower and rounded or flattened the edges.
The bracket can be used for both sides of the headset.
Print settings:
- I recommend PETG or ABS.
- 0.15 layer hight
- 6 perimeters
- < 50% infill
- Supports: yes
- Brim: Maybe
Installation:
First, the rubber band must be removed. To attach the holder, the 2 screws in the area to be repaired must be removed. Then the holder can be pushed in. For correct orientation, see the photos. Now the 2 screws can be reattached. The holder is then pushed over with a little force. Now the rubber band can be reattached. It may be that the holder has to be pressed when pushing the rubber band through so that it fits through the gap.
Thats it :)