P
Printables
Steelseries Arctis Nova Pro DAC mount
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
Wyniki wyszukiwania: steelseries
Liczymy pasujące modele…
P
Printables
Slim Steelseries Arctis Nova Pro/7p/7x/7 Wireless Travel Case Lid - AMS/CFS
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
P
Printables
SteelSeries Headset Stand
The main body parts have been combined into a single part, which emits the need for screws.
P
Printables
SteelSeries Cat Ear Clip Remix
I really liked the original cat ear design—it’s simple, stylish, and easy to print. To make it compatible with my SteelSeries headset (Arctis 7+), I remixed only the clip portion. The original ears can still be used without any changes.…
P
Printables
Steelseries APEX 5 usb C adapter
This is a mod for the steelseries apex 5 keyboard to replace the cable with a usbc female port. No need to cut open a slot in the frame, this adapter can use the already there opening for the cable This model was made to host this kind of…
P
Printables
Steelseries Arctis Nova Pro Battery Holder
Steelseries Arctis Nova Pro Battery Holder x2 - x3 - x4 Holds your batteries nice and snug, ready to be deployed in seconds when your active battery dies… And it looks better on your desk than letting the batteries float on your desk or…
P
Printables
SteelSeries Arctis 7 Pro
CZ: Budete potřebovat: Kleště na klipy nebo E-kleště na klipy Lepidlo Vrtačku + vrták(10mm) První krok: Odděláme PCB desku a odpojíme kabely z desky. A vytáhneme si stranou kabely. Viz. obrázek 1 Obrázek 1 Druhý krok: Vyvrtáme díru s…
P
Printables
Steelseries Apex Pro Mini Wireless Underdesk Keyboard Mount
It is basically a underdesk keyboard mount for Apex Pro Mini Wireless . As seen on pictures, you may use it on any perforated surface. I have used M3 bolts and nuts to tighten it. Printed with PLA with %15 infill and no supports needed .…
P
Printables
SteelSeries Arctis 7P USB dongle holder
USB dongle holder for SteelSeries Arctis 7P (PS5) so you can mount it to the PS5's panels for a better signal reception and a cleaner look of your gaming area. Two versions available : - Minimalist for a classic look (print with 0.4mm…
P
Printables
Mouse wheel Steelseries Rival 3 M00018
It is recommended to print on a high-resolution 3D printer and not FDM since the distance is very small
P
Printables
SteelSeries Arctis Pro Repair Broken Bracket Fix
Hello, i own a Steelseries Arctis Pro Wireless. After about 5 years i discovered a small crack on the right side near the bracket where the rubber band is inserted. I tried to glue it with special plastic glue, but unfortunately this…
P
Printables
Steelseries Arctis Nova Pro DAC mount
Enables you to mount your Steelseries Arctis Nova Pro DAC to your Aluminium profile simrig. The mount also has a place to store your spare battery.
P
Printables
Steelseries Aerox 9 wireless mouse reminder for switch
I found myself occasionally forgetting which way to switch the mouse on at a glance, as the bluetooth and 2.4ghz labels are hard to read. So rather than use a paint pen, I've spent over 270 waking hours and 42.7KG of filament designing…
P
Printables
SteelSeries Arctis Nova Pro Wireless DAC Stand
SteelSeries Arctis Nova Pro Wireless DAC Stand| Sat on table too low for me, so with zero experience i made that abomination. Tips are welcome
P
Printables
Steelseries Nimbus clasp for generic self-stick mount
I've removed the hinge in favour of a cylindrical pot to glue the top-end of a generic self-stick that can be bought from any cheap shop (i sourced mine from Daiso). This is the style of the one I purchased
P
Printables
Steelseries Headphone Rack
Screw into the bottom of a desk with 6 * ¾ inch screws, made to hold headphones on the side
P
Printables
AlzaErgo Arm D35B holder for SteelSeries Arctis Nova 7 USB dongle
AlzaErgo Arm D35B holder for SteelSeries Arctis Nova 7 USB dongle
P
Printables
Replacement SteelSeries Stratus XL Game Controller Clip for official phone mount
Printed 0.2mm, 3 walls, 15% infill. I did organic supports, support enforcers only and then painted on supports for the floating ring. I printing in black ASA but any filament should work. Fitting the phone mount onto the controller clip…
P
Printables
SteelSeries Arctis headband
This a replacement headband for SteelSeries Arctis 7/7+/9X/ArctisPro Printed out of TPU you never need another one. You can adjust the length if you need more space. The original headbands get lose after some month, so I made this to not…
P
Printables
SteelSeries Arctis Nova Pro Wireless Charging Stand
This is a wireless charging stand for the SteelSeries Arctis Nova Pro enabling the headphones to charge using a built in Qi charger. It requires you to add a Qi-to-USB-C adapter to the USB port on the headphones and to either remove the…
P
Printables
Steelseries Hub (61298TX) Holder
Steelseries hub (61298TX) holder i printed with PETG and it took around 4 hours. (tight fit) I choose PETG for durability to put hub in this holder Used 0.2mm line height with supports. But maybe you can print without ;)
P
Printables
SteelSeries Arctis Pro Wireless Gaming Headset Speaker Plate Personalization Reference
I recreated the headphone cup caps (they may be called “Speaker Plates” for my SteelSeries Arctis Pro Wireless. It maybe be possible to FDM print these with a 0.4 mm nozzle, but I have not attempted it yet. I just wanted to try and…
P
Printables
Steelseries Headset Stand
Printer: MK4s Layer Height: 0.25mm Nozzle: 0.4mm Materials used: PETG / PLA Supports needed: No Infill: 15% Print times: Total: 5h29m / 55m white / 4h34m black Need help? Find me on Discord: https://discord.gg/NndzwJvN
P
Printables
Steelseries battery holder
Introducing the SteelSeries Battery Holder, the essential accessory for your SteelSeries headphones that use swappable batteries. Designed for convenience and efficiency, this sleek battery holder ensures that you always have a fully…
P
Printables
Steelseries Chatmix Dial Holder
This is a holder for Steelseries headphones Chatmix dial. The mounting point will print solid and will need to be drilled out by the printer to fit the appropriate mounting hardware you'll be using. Can be mounted to any solid surface,…
P
Printables
Slim Steelseries Arctis Nova Pro/7p/7x/7 Wireless Travel Case Lid - AMS/CFS
A lid to print with the original model base, removes a box shaped face on the inside of the lid. Also positions the logo object for easier printing, either change colour by object for AMS/CFS, or print the whole object as one colour.
P
Printables
SteelSeries Arctis Nova Pro Wireless DAC Under Desk Mount
Hello! I designed in Fusion 360 to help get my DAC mounted underneath my desk.
P
Printables
SteelSeries Arctis 1 Wireless dongle holder
Simple holder for SteelSeries Arctis 1 Wireless headphones, would work with other headphones of the same brand with same cable extender for dongle. Jednoduchý držák pro sluchátka SteelSeries Arctis 1 Wireless, bude fungovat i pro jiná…
P
Printables
Under-monitor mount for SteelSeries Nova Pro DAC
A custom 3D-printed mount designed to install the SteelSeries Nova Pro DAC under an MSI monitor. Maybe is only MSI monitor (i have G241)
P
Printables
SteelSeries Apex Mini Wireless Adapter for Corsair K63 Wireless Lapboard
This adapter allows you to use a SteelSeries Apex Pro Mini Wireless in an original Corsair K63 Lapboard. It uses the mounting pegs originally meant for the K63 keyboard to secure to the right side. It is a friction fit but tight enough,…
P
Printables
SteelSeries Headset Stand
The main body parts have been combined into a single part, which emits the need for screws.
P
Printables
SteelSeries Cat Ear Clip Remix
I really liked the original cat ear design—it’s simple, stylish, and easy to print. To make it compatible with my SteelSeries headset (Arctis 7+), I remixed only the clip portion. The original ears can still be used without any changes.…
P
Printables
steelseries arctis pro wireless Hub holder undertable
This is an under the table, Steelseries Arctic pro wireless hub holder, to make your desk space nicer. Tips are much appreciated. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill:…
P
Printables
Steelseries APEX 5 usb C adapter
This is a mod for the steelseries apex 5 keyboard to replace the cable with a usbc female port. No need to cut open a slot in the frame, this adapter can use the already there opening for the cable This model was made to host this kind of…
P
Printables
Steelseries Arctis Pro Cyberpunk plate
Steelseries Arctis Pro Cyberpunk plate Just need magnets once printed You can use multiple colors using mmu/coolor change as height are different for each colors. Though I would recommend resing printing and painting
P
Printables
SteelSeries Apex 7 tilt leg
Printed with PETG 0.12 mm layer height. Inner/Outer/Inner wall print order. Ironing all top surfaces, 20%. 2 wall loops. 15% infill.
P
Printables
Steelseries Arctis Nova Pro DAC Desk Cradles
I need a riser cradle so my DAC sat above my keyboard. I remixed another model and created 4 variants. Remixed from PolyGone's (PolyGone_124826) fantastic Sim DAC Mount. Comes in 4 variants: 1. Flat without logo 2. Flat with logo 3.…
P
Printables
Next level racing steelseries Apex 7 TKL keyboard holder
I had an apex 7 tkl I wanted to use on my sim, and modified this mount to hold it very securely. The keyboard is held solely by friction, and is quite tight. The riser requires M3 heatset inserts, and is fastened using m3x8mm BHCS with…
P
Printables
SteelSeries Arctis 9 Transmitter Holder
This holds the SteelSeries Arctis 9 wireless transmitter to an openGrid wall using openConnect. I've included one openConnect holder but you can use any of them.
P
Printables
Steelseries Arctis Nova Pro Battery Holder
Steelseries Arctis Nova Pro Battery Holder x2 - x3 - x4 Holds your batteries nice and snug, ready to be deployed in seconds when your active battery dies… And it looks better on your desk than letting the batteries float on your desk or…
P
Printables
SteelSeries Arctis Nova Pro Wireless (ref. 61520) Travel Case Lid - Remix of cperuffo3
This remix fixes the following issues: Fragile locking tab: The original tab was too thin and prone to breaking; it has been reinforced. Internal height: The original clearance was insufficient and crushed the ear pads. This version…
P
Printables
SteelSeries Arctis 7 Pro
CZ: Budete potřebovat: Kleště na klipy nebo E-kleště na klipy Lepidlo Vrtačku + vrták(10mm) První krok: Odděláme PCB desku a odpojíme kabely z desky. A vytáhneme si stranou kabely. Viz. obrázek 1 Obrázek 1 Druhý krok: Vyvrtáme díru s…
P
Printables
Arctis Pro Wireless Base Desk Mount Steelseries
This is a remix for fitting my base I printed the Original part in DevilDesign Black PLA, and I wasn't able to fit the deck in the support without snapping in 2, so i made this remix to fix the problem Steelseries Artics Pro Deck
P
Printables
SteelSeries Stratus XL Game Controller Clip Phone Holder
This is a clip to retain a smartphone to a game controller for playing games. Because the XBox and Playstation game controllers are more popular, the SteelSeries Stratus XL seems to be overlooked. So, I made this smartphone mount for my…
P
Printables
SteelSeries Arctis Nova 5 > Outer Frame Replacement <
After using my Arctis Nova 5 for barely over a year the outer frame snapped when I was taking it off normally. Quite disappointing. Since the rest of it was working fine I decided to print a new one. It is a bit bulkier than the original…
P
Printables
Steelseries Apex Pro Mini Wireless Underdesk Keyboard Mount
It is basically a underdesk keyboard mount for Apex Pro Mini Wireless . As seen on pictures, you may use it on any perforated surface. I have used M3 bolts and nuts to tighten it. Printed with PLA with %15 infill and no supports needed .…
P
Printables
Steelseries Arctis Nova Pro headphones customizable Accent Plates
These are earcup accent plates for the arctis nova pro series of headphones. It should fit any arctis nova pro submodel. You can print them in any color you want to make your headphones more yours. The right and left sides are the same,…
P
Printables
Steelseries Arctis Nova Pro ear pad spacer
No additional tools or pads required, just plug and play. Available as a straight piece as well as angled for better cushion seating. Reupload: https://www.thingiverse.com/thing:6395204 Original author: Okasai
P
Printables
Mouse Embiggener for SteelSeries Rival 310
A shell following the original contours but scaled up to avoid cramping I would experience
P
Printables
Steelseries APEX M800 / QS1 switch lock replacement
This is a tiny small print for key lock replacement Print into Super Quality mode Remove all previous lock support from key and glue with CA in place. Be carefull on centering key and switch.
P
Printables
SteelSeries arctis 7 receiver holder/mount
i made this so i could put my receiver for my headset somewhere more convenient and out of the way. originally i wanted to have it clip into something but couldn't find a good place or mounting method. feel free to remix this to mount…
P
Printables
Steelseries Arctis Pro transmitter underdesk storage
This holder will let you place once for all the transmitter under your desk. It have not being designed to be removal. It's ugly but work's well. You can place it with 3M tape under a glass table or any desk. The battery tray is still…
P
Printables
Steelseries mouse holder/ mouse holder
This is a mouse holder designed in SteelSeries style but can be used for non-SteelSeries mice with an additional option without the logo.
P
Printables
Mouse Holder(Case) - Steelseries
Mouse Holder(Case) - Steelseries - Rival 3 Very simple with Steelseries logo for desk. Internal Dimension: 67.5 x 42 x 63h mm Also check the radius of the curvature if it is suitable for your mouse, the model it can be rescaled. Add Model…
P
Printables
SteelSeries Arctis Pro Wireless DAC Mount
Updated 11/14/24 Should load into slicer as intended to print, minimal or no supports. Thanks for the help with development and testing to user @Arson_2595054
P
Printables
SteelSeries Arctis Nova 7 Shrek Ears
I printed these with PLA+ with a 4mm nozzle and 0.2mm layer height. I used the default Cura profile for PLA. I advise using raft for adhesion as it will help with the support material removal. You'll also need magnets from amazon, I used…
P
Printables
SteelSeries GameDAC desk mount with headset holder
Prints fine with 10% infill. Only needs support on the top part. Screws in at the bottom with two screws.
P
Printables
SteelSeries mouse stand
This is stand for SteelSeries mouses. Compatible with other gaming mouses.
P
Printables
STEELSERIES ARCTIS 9 TRANSMITTER HOLDER
I wanted more room on my desktop so i made this holder to mount it under the table. Space to use all the ports
P
Printables
Steelseries Arctis Pro Wireless Battery Holder(2 and 4 slots)
Printed 0.15mm Filament: 3DJAKE magicPLA
P
Printables
Steelseries arctis pro hub stand
Bought a steelseries arctis pro wireless headsett wich comes with a bluetooth hub that needed some upgrades. Print x1 Hub Print x2 Feet Glue the feets on the bottom of the hub. Feets are taken from kafka who made a remix from Subsite
P
Printables
Corsair Virtuoso SteelSeries Headband Adapter
Additional M2x6mm screws are needed. Simply unscrew all four existing screws and place the adaptor on top of the plastic cover. M2 screws should just fit in without any problems. Do not use extensive force! Afterwards, any SteelSeries…
P
Printables
Steelseries mic holder
Having detachable mic in your headset might be tiring - it bothers when it's lying unnecessary on the desk and when you need it the most, always can't find it. Here comes the mic holder for Steelseries headset! Very easy and quick model…
P
Printables
SteelSeries Arctis Pro broken earcup insert
A cheap and easy fix for cracked and broken Arctis headphones, You will need, Retaining Clip plyers or E clip plyers Loctite Super glue MUST BE THIS TYPE! A soldering iron A screwdriver A 11mm or 7/16" drill bit OR Dremel and patience……
P
Printables
Steelseries Aerox 3 Wireless dongle holder/mount
I wanted to mount my Steelseries Aerox 3 Wireless 2.4ghz dongle on my monitor. It's 105% oversized to account for error, the dongle fits flush but don't expect a friction fit. v4 was the print displayed on the pictures. The USB-C…
P
Printables
Reinfoced Steelseries Wireless H/ Siberia Optical Input cable holder (Dock)
Disclamer: Not printet jet. Just s simple remix to add some suport + zipties. Alsow, made the "cable channel" a littel wider to be able to hold all cables(usb/power) and provide some cable managment. Possible modifications as soon as I…
P
Printables
Remix of SteelSeries arctis 7 receiver holder/mount
The arctic 7 receiver/transmitter has always been annoying because it is small and light. The tension from the cable makes it turn around and be in the way on the desk. When I saw the mount for it I printed it hoping that it would solve…
P
Printables
Command Strip Headset Holder Steelseries
Command strip headset holder. This can be mounted anywhere on a vertical surface. This hook is longer to accommodate the broader headband of the SteelSeries headphones.
P
Printables
Cable Spool for Steelseries USB ChatMix dial
This cable spool was made specifically to fit the ChatMix dial on top of the spool while allowing the cable attached to the dial wind up inside the spool. The top of the spool involves a fitted snapping function for assembly that is made…
P
Printables
steelseries Arctis Pro Wireless Headset - Spare Battery Holder
I designed this model to hold a couple of spare battery packs for my steelseries Arctis Pro Wireless headset. It fits over the top of the base station so your spare battery packs are always handy. It should fit snugly and not require any…
P
Printables
SteelSeries Arctis Pro Wireless Gaming Headset Speaker Plate REMIX
Both model's are rescaled to fit better on the headphone. The one with the Punisher Skull you can color change it if you like. You can use multiple colors buy using different height for each layer height. I'm using prusa mk3s with a 0.6mm…
P
Printables
SteelSeries Arctis headband clip retainer
I had enough with the dangling headband, the headband stretches over time and every once a while i tighten the headband, which leaves a dangling strap. Please if there is any suggestions post them in comments, also if you would like to…
P
Printables
SteelSeries Arctis Nova Pro Battery Case
Battery case for your SteelSeries Arctis Nova Pro headset. I only used prusament PLA for this, 15% infill, brim, no supports. Pretty much default settings. Most filament materials should work.
P
Printables
clip for phone for STEELSERIES Stratus Duo controller
Clip for STEELSERIES Stratus Duo, for One+7T. It's not available to buy it in Europe so inspired by https://www.thingiverse.com/thing:1498137 and created my own clip for my OnePlus 7T. Created in fusion360 - file available here to modify…
P
Printables
Headphone Wall Mount With Steelseries Logo
Design does not have screw holes. I glued it to wall and it holds up nicely. It is a bit long to wall to prevent headphone rubbing against wall. Design has step file so you can modify it your needs. No supports needed
P
Printables
SteelSeries Siberia V2 Horns
Bracket and horns for the Steelseries Siberia v2 headphones Remixed From: Little Horns by Scottland Print instructions I printed the bracket on edge with supports, but didn't require any for the horns.
P
Printables
steelseries Arctis Nova Pro Wireless Travel Case
I need to travel with my headset sometimes and decided to create a case for it! Can hold both the headset and the DAC along with any cables you may need as well. DAC fits in the middle of the headset band (see image) inside the case. Fits…
P
Printables
Steelseries Arctis Pro Wireless Headset Button Cover
I may be sitting in unhealthy and weird ways, but essentially I managed to regularly press the mic mute button as well as change the volume of my headset through the back portion of my chair and in winter my sweaters were enough to reach…
P
Printables
Steelseries Arctis 1 Wireless USB Dongle clip
Clip to hold the USB dongle for the Steelseries Arctis 1 Wireless. It attaches the dongle to the headband when not in use, and still allows you to plug it in to a USB port without needing to take off the clip. Just print it with the flat…
P
Printables
Sony Pulse 3D headphones - microphone mod (mic from SteelSeries Omen by HP)
Microphone in Sony Pulse 3D headset is very, very, very, very bad. People told my that over and over in multiplayer games. So decided to change things: microphone taken from cheap (bought broken from second hand) SteelSeries Omen by HP…
P
Printables
HSW Headphone Hanger - SteelSeries Logo
Presenting a take on Tom Nardi's (HSW) creation, catered specifically for those seeking a Steelseries Logo Version. Behold!, three distinct Width versions, measuring 35 mm, 45 mm, and 55 mm, each offering both extruding and intruding…
P
Printables
Steelseries Aerox 3 specific pillar
My Steelseries Aerox 3 WL has been sliding around on the original stand so I created a bit less universal mouse pillar. I started from the ground-up again based on the measurings of the original STL.
P
Printables
SteelSeries Arctis Pro Wireless headphone hanger
Wall hanger for SteelSeries Arctis Pro Wireless headphones. Takes on 4mm woodscrew into either wallplug or stud. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: eSun PETG…
P
Printables
Steelseries MX500 Keyboard Feet
I made these because I put weight on my £120 MX500 and broke off the feet pins. They're shaped similarly and fold in just like the originals, 100% infill and the pins are stronger than the originals (in my experience). Width is 24.70mm,…
P
Printables
Steelseries Apex keyboard replacement foot
My Steelseries Apex keyboard recently lost one of its rear feet during a move, and Steelseries support doesn't sell or provide replacements. This is a model for a replacement foot that roughly matches the stock foot – it's not an exact…
P
Printables
Steelseries Wireless Headset stand
The stand is a single piece printed on the back vertical face with no supports required. It is my own design using FreeCAD 0.19 specifically to fit over the Siberia 840 OLED Transmitter unit. The transmitter case seems to be the same size…
P
Printables
Wireless Headphone Case SteelSeries Nova 7 and more
Intro: This is a travel case I have designed for traveling. It's fits the Nova 7, and I assume the 7X and 7P. There's a smaller compartment to fit the wireless receiver and a small charging cable. Print settings: I printed this all in PLA…
P
Printables
SteelSeries Nimbus Phone Mount (iPhone 6 Plus, 7 Plus, 8 Plus, XS Max, 11 Pro Max + Case)
This is a phone mount for the SteelSeries Nimbus MFi controller for iOS. I had a commercial one I bought for an XBOX One controller that worked pretty well, but it wore out after awhile of taking it on and off and blocked the switches on…
P
Printables
SteelSeries 61505 Arctis 7 Headsetfunkhaltedingsbums
I hate it when I go around with my laptop during meetings and always have to ensure that the wireless dongle does not hang around and stresses the USB port. This ugly gadget was my first design in tinkercad. It looks like sh** but works…
P
Printables
Steelseries Apex Pro USB Type-C Mount
A small mounting bracket for the Steelseries Apex Pro keyboard to hold a USB Type-C female breakout board, allowing for the replacement of the USB Type-A pass-through port to be used as either a pass-through USB Type-C or to create a…
P
Printables
Steelseries Arctis Nova 7 Horns
The idea was to create some cosplay like attachments for the Steelseries Arctis Nova 7 to bring some laughter to a web meeting. As there were only two models - sdahris Arctis Nova Ear Plates and the original SteelSeries Arctis Nova 7…