HORIZONTAL Print - Slim Angled Talon Short Dart Magazine (13/10/8)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MINI angled talon mag which can be printed horizontally. This is more stable and does not cause those scratching noises.
- Ocena
- 4,857 / 5
- Polubienia
- 133
- Pobrania
- 422
- Wydruki
- 5
- Wyświetlenia
- 3274
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
HORIZONTAL Print - Slim Angled Talon Short Dart Magazine / MINI Angled Talon Magazine (13, 10 and 8 darts)
This is a remix of the horizontal print magazine by Astropulse which can be found here
Horizontal print 31K/Diana magazine von Astropulse | Kostenloses STL-Modell herunterladen | Printables.com
I added the back notch that come with the slim angled talons and removed the 31k notch. I also added a version of the follower for regular talon springs (wire springs).
Horizontal mags slide smoother, get stuck less, and sound quieter when loading/unloading.
A big advantage of this is the print direction of the feed lips, which makes them much more difficult to break when printed horizontally.
The files are already preoriented.
DO NOT use supports inside the magazine!
Keep an eye on the result of the bridging inside the magazine. If there are any messy spots, you will need to rework them a little with a small file.
UPDATE 8.1.2025:
Added a flush version of the bottom plate.UPDATE 29.4.2025:
Added 13 darts versions
Click here for some more HORIZONTAL PRINT magazines for short darts
-----------------------------------------------------------------------------------------------------------------------------
My print settings for PLA:
0,2mm layer height
5 walls
at least 5 top and bottom shell layers
20% gyroid infill
Tree support on feed lips and back notch facing the print bed, optionally on drum spring clip.