1 / 11
Debris Buckets for Prusa XL 3030 profiles and 10, 11.6, 12, 12.5 or 16.5mm wide Slot-In Nozzle Brush Holders Auffangbehälter für Prusa XL 3030 Profile und 10/11,6/12/12,5/16.5mm breite Slot In Düsenbürsten-Halter — zdjęcie 1
1 / 11

Debris Buckets for Prusa XL 3030 profiles and 10, 11.6, 12, 12.5 or 16.5mm wide Slot-In Nozzle Brush Holders Auffangbehälter für Prusa XL 3030 Profile und 10/11,6/12/12,5/16.5mm breite Slot In Düsenbürsten-Halter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Debris bins to hook in 3030 profiles and to lock slot-in nozzle brushes in widths 10, 11.6, 12, 12.5, 16.5mm.

Ocena
4,667 / 5
Polubienia
41
Pobrania
242
Wydruki
6
Wyświetlenia
948
Oceny
6

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

EN:
These are remix variants of martonas excellent revision of my original debris bucket. His version improves my design as it can be printed without support and hooked firmly into the 3030 profiles. It also stabilises slot-in nozzle brushes so that they are not displaced or twisted by the print heads, although this has not happened to me before.

In addition to minor design changes, I made variants with matching cut-outs for various slot-in nozzle brushes/scrubbers from Manuel Beeler (10mm holder width/10.4mm bucket cutout), PéPé Stéf & my remix (11.6mm holder width/12mm bucket cutout), Franck (12mm holder width/12.4mm bucket cutout), JCShumpert (12.5mm holder width/12.9mm cutout) and my brass wire nozzle brush (16.5mm holder width/16.9mm bucket cutout), each with a 0.2 mm gap to the right and left of the holders.

DE:
Das sind Remix-Varianten von martonas exzellenter Überarbeitung meines originalen Filament Sammelbehälters. Seine Variante verbessert mein Design, da sie sich ohne Support drucken und fest in die 3030 Profile einhaken lässt. Außerdem stabilisiert sie Slot-In-Düsenbürsten, so dass sie nicht durch die Druckköpfe verschieben oder verdrehen, wenngleich mir das bisher nicht passiert ist.

Neben kleineren Designänderungen habe ich Varianten mit passenden Aussparungen für verschiedene Slot-In Düsenbürsten von Manuel Beeler (10mm breiter Halter/10,4mm Ausschnitt), PéPé Stéf & mein Remix (11.6mm breiter Halter/12mm Ausschnitt), Franck (12mm breiter Halter/12.4mm Ausschnitt), JCShumpert (12,5mm breiter Halter/12,9mm Ausschnitt) und meine Messingdraht Düsenbürsten (16,5mm breiter Halter/16,9mm Ausschnitt), die jeweils 0,2mm Abstand rechts und links von den Haltern haben.

Tagi