1 / 5
Bearing filling cap for Zeller + Gmelin Divinol Grease — zdjęcie 1
1 / 5

Bearing filling cap for Zeller + Gmelin Divinol Grease

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cap to pack 8mm linear bearings with grease from a 1kg Zeller + Gmelin Divinol grease tube.

Ocena
4 / 5
Polubienia
2
Pobrania
13
Wydruki
2
Wyświetlenia
229
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a cap to pack 8mm linear bearings with grease from a 1kg Zeller + Gmelin Divinol grease tube. It attaches directly to the grease tube, and has outlets inline with each of the four bearing races of common 8mm linear bearings. 000-150 grease is relatively low viscosity and works well for the linear bearings of 3D printers

Please post a make photo if you print this; remixes welcome!

Tagi