REINFORCED X-Shot Longshot Extended Barrel Front End (O-ring + threaded fixation)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reinforced this nice frontend for the X-Shot Longshot
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 170
- Wydruki
- 2
- Wyświetlenia
- 872
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reinforced this nice frontend for the X-Shot Longshot because mine unfortately broke at the thread.
It could be because of the crappy filament I used or all the silicone grease that has accumulated there at the front^^
I reinforced it in that area anyway when I reprinted it.
I hope that it won't break anymore now because of the reinforcement^^
I also made the threaded nut in the front area flat to make it printable without support.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
30% gyroid infill
7 top and bottom shell layers
* the frontend needs support
* the nut doesn't need support
Thanks to ValTek Armory, FIB and Sillybutts for the files I could use for this remix.