1 / 7
Parcour Barrel for 1:10 Crawler like Traxxas TRX-4 and others
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parcour Barrel for 1:10 Crawler like Traxxas TRX-4 and others
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (30)Powiązane
This barrel has been designed as a guidance and/or obstacle on your crawler course and parcour.
It can easily be stuck into the ground. I recommend to print in PETG with at least 3 wall lines or more.
The modell is made with a spike for better hold in the ground. You can easily cut it off in your slicer to use the barrel only.
Have fun improving your driving skills!
Material: PETG
Layerheight: 0.3mm or better
Infill: 25%
Wall lines: 3+