Jonsbo N4 60mm Fan mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
for better airflow through the drives
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 150
- Wydruki
- 1
- Wyświetlenia
- 1452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Hey, I was trying to improve the airflow in the drive bay of my Jonsbo N4 Homeserver case, and I saw that there is a vent above the PSU, and since air takes the path of least resistance, I assume that a lot of the air being sucked out by the 120mm fan and the PSU fan probably comes from there and not from the drives...
Plan a was, to at least block it of…
And plan B is this bracket, you can fit a 60mm fan perfectly and the rest of the ventilation holes are still blocked... I used a Noctua A6, which is quiet, and I would recommend a fangrill because of the cables.
You need at least 8 of these thick 5x10mm Fanscrews and depending on your mainboard and fan a fancable extention (i needet one)
happy printing!