1 / 6
PRUSA CORE One Magnetic 3in and 4in Duct Exhaust Adapater
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic duct adapter for the Prusa CORE One to exhaust fumes out a window.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 266
- Wydruki
- 4
- Wyświetlenia
- 1677
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 4) (Komentarze: 8)Remiksy (1)Kolekcje (155)Powiązane
Updates:
- 26-Feb-2025: V4 model
- Increased the size of the duct adapter significantly
- increased magnets holes from 4 to 9
- added a 4in duct adapter
- requires about 7 in of clearance behind the printer (with duct attached)
- Requires about 200g of filament and about 7 hours of print time
- V3 was about half this
- Increased the size of the duct adapter significantly
Additional Materials
- 8mm diameter magnets (up to 10mm in height)
- 4pcs M3 machine screws
- 3-4in worm clamp
- 3in or 4in duct (length based on your needs)
- additional hardware based on your needs
Print Settings
- Print in PETG using any QUALITY or STRUCTURAL profiles
- Set internal perimeters to .8mm to increase strength and reduce print time
Assembly
- Once printed, press 8mm magnets into the exposed holes
- Attach M3 screws to the printer, these will locate the adapter to the exhaust port
- Attach the duct to the adapter using a worm clamp
- Attach to the printer using the M3 screws to locate onto the adapter
Misc.
- Used my exhaust port reference CAD as a starting point
- While it holds fine, I feel the magnetic strength is weaker than I expected even with 4 8mmx8mm magnets.
- STEP file included for remixing
- Thanks to rcprsa for pictures of the 4in v4 model