1 / 5
Improved Steering Arm for Explorer MK1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Steering Arm for Explorer MK1
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 56
- Wydruki
- 1
- Wyświetlenia
- 298
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original "front-set_steering-arm" of the Explorer MK1 has several disadvantages:
- Large tolerances causing steering wobble / or in some cases too much frichtion
- Excessively long steering arm for the servo, resulting in collision during steering
While there's an existing remix that improves the standard arm, I wanted to avoid reprinting numerous parts. Therefore, I decided to design a solution that better suits my preferences. I discovered that this small part is more than strong enough for the task.
Benefits of This Modification
If you're looking for:
- Better tolerance in the steering arm
- Reduced friction in the steering mechanism
- No collision between the steering arm and its support
Then I highly recommend printing these parts.
Printing Guide
- Material: PETG
- Settings:
- 4 perimeters
- Random seam (also known as random start points)
Required Parts
- 2x 10x15x4 bearings (the same bearings required for the wheel axis)
- 1x M4x30 and M4 nut (Same as for standard steering arm)
Installation
