1 / 4
MULTI-TOOL ___ Barrel Clamp Picatinny Rail Mod + Frontgrip (Boom Grip)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottom picatinny rail mod for the Barrel Shroud + frontgrip (Boom Grip) for the bolt-action MULTI-TOOL
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bottom picatinny rail mod for the barrel shroud + frontgrip (Boom Grip)
for the bolt-action Multi-Tool
- Barrel clamps (for 16mm aluminium barrels) to install the barrel picatinny rail from the top, again at the bottom of the barrel shroud, to attach a frontgrip - or something else.
(you need 2 selftapping screws M3x20mm to attach the pica rail onto the clamps) - The Boom Grip has been modified to fit the Multi-Tool.
2 versions are available. (the Boom Grip shown in my pictures is the short version)
Other mods for the Multi-Tool as seen in the pictures can be downloaded here.
The files are already pre-oriented.
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
No supports needed.
Thanks to Chris Doughty and Chance for the files I could use for this remix.
You can purchase the files for the Multi-Tool from Chris Doughty's Etsy shop.