Friction Grip Bedframe Power Strip Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible but firm friction grip for bedframe power strip mounting without the need for double sided tape. Updated 4.2.25
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 150
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Power strip friction-style bed clip mount that's light and sturdy, prints in about an hour and requires no additional adhesives, fasteners or hardware.
Note this requires printing two of these for comprehensive power strip fastening.
This print uses the existing keyhole style openings on the back of your power strip to slide the print mushroom profile into the locked keyhole position (←→ of the O). It is suggested that you print two of these prints so the power strip doesn't move with devices plugged in.
I printed using 1.75mm Noctilucent PLA 200 degrees from a 40mm nozzle with a 35 degree bed, .2mm quality 20% infill, with the clip looking like a G on the print bed. Brim, 10% tree supports, not really concerned with the print presentation, but the adhesion.
4.2.25 Update - See the new model and arranged gcode files for the optimal print configuration of the updated clip.