Film Holder for Flatbed Scanner (Every Size)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick and easy film holder for your flatbed scanner that works every time.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 683
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Modelled to work with the film sizes specified, I've also included the .f3d files if anyone wants to modify their own for an unusual film size.
You should use some 6x2mm neodymium magnets to hold the two halves together as this ensures that the film is completely flat, however, they will work just fine without them.
This has been modified to have the focal distance at ~3mm from the scanning glass, which is the correct focal distance for my scanner, this may not be the case for yours as not all scanners are made equal, this is why I've included the Fusion files for you to edit if you need to adjust your focal distance.
Current included holder sizes are:
110 / 16mm
APS / 24mm
135 / 35mm
126 / 35mm
127 / 46mm
120 / 60mm
116 / 70mm
These holders must be printed in Black filament, which kind of filament doesn't really matter (PLA works fine) as long as your printer can print to within around 0.5mm, it should be fine.
Should be compatible with any flatbed film scanner, but this has been tested on the Epson Perfection V700 Photo so definitely works with the following scanners:
Epson Perfection V700 Photo
Epson Perfection V750 Pro
Epson Perfection V800 Photo
Epson Perfection V850 Pro
Should be fine with other scanners, but I just haven't got them to test.