Liczymy pasujące modele…
I tried the other available models in my camera, but they were far too large to allow the door to close. I also noted that the bottom portion of the cartridge had a raised section (to mirror the top) which seemed to be unecessary in the…
Fiat 126p aka Maluch An iconic Polish car from the communist era. Produced to be a car for the masses in a similar way the VW bug was in "the west." Dubbed Maluch (the little guy / toddler) by the people. It is not a 100% accurate…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model in multiple colors produces…
This case is designed to house the Seeed Studio XIAO ESP32S3 & Wio-SX1262 along with a LiPo 1100mAh battery (size 703048) Update 07.08.25 Added a power switch, removed the button (since it's no longer needed with the switch), and added…
This model is compatible with the lego system.
Tube Case for the Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit for Meshtastic https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html Print Settings: PETG 0.2mm layer 4 walls 15% infill add support on everything…
This device is based on XIAO ESP32S3 and Wio-SX1262 LoRa module, making it the smallest Meshtastic Device, LoRa Sensor Node or a One Channel LoRaWAN Gateway. Coupled with an exquisite 3D - printed casing, it is equipped with an 868 -…
This model is compatible with the lego system.
A compact tube-style enclosure designed for the Seeed Studio XIAO nRF52840 & Wio‑SX1262 Kit . This case is suitable for portable Meshtastic or MeshCore LoRa nodes , powered by a single 18650 Li-ion battery. The cylindrical design protects…
For years now I've had a ratty nail going through the magnet to hold my Hue motion sensors in the corner. It not only looks janky, it doesn't stay put very well. Then, I got a 3D printer. i checked out a few models online, but I didn't…
Case for fujifilm NP-W126 and NP-W126S batteries. Optimal wall thickness for the most minimalist design possible. Original and non-original NP-W126 / S batteries fit into the case. Recommended PRINT SETTINGS: layer heigh: 0.13 - 0.18…
This is a very tight fitting case with very little tolerance. Minor trimming with a xacto knife might be necessary, especially around the “rim” on the back when snapping it into the front. The 100mAh battery does not take all the space,…
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
Uses these terminals from Amazon for the 18650 sled. For the spring terminal, i trimmed the tab slightly, and it slides in at a 90 degree angle to route the wire up the side of the sled, and through the hole in the top. (pictures…
A component that can be placed between the two circuit boards to secure the antenna connector. I've had the connector come loose before - but with this antenna clamp, the connector is now secure and can no longer come loose accidentally.…
This model replaces the original mudguard with the integrated chainguard. Just removing the OEM one doesn't do the trick, as oil/grease/dirt from the chain will be yeeted everywhere. With this chainguard the back not only looks cleaner,…
This is a high-performance LoRa module specifically designed for the XIAO series development boards. Based on the Semtech SX1262 chip, it supports global LoRa bands (862-930MHz). Combined with the powerful computing capabilities of the…
An holder for Espon scanner V600, for 126 format negative film. Design with DesignSpark Mechanical (Free software)
Recently I found the Xiao ESP32S3 with Wio-SX1262 LoRa hat as a good and cheap Meshtastic node for installtion at home. For some time it was just sitting in a breadboard which, the USB cable dangling between some flowsers… you know, it…
This is a bezel with press pad for 0.96" 126x64 I2C OLEDs (about 25,3x26mm) that can be mounted “hole only” (5 holes) on a panel. M2 screws with washers and nuts are used for attachment.
Remixed sushimoto's gear which had a perfect teeth fit but my buddys Benz had a different shaft size (6mm) Print Settings Supports: Yes Resolution: 0.2 Infill: 100 Filament: PETG
Description While I wasn't looking to make the most unreasonably small Meshtastic node when I originally bought my XIAO ESP32S3 & Wio-SX1262 from Seeed Studio ; however, it has become quite a Quixotic quest to come up with one…
These files are for Personal Use Only . If you would like a Commercial License to sell prints made from these designs, please join me on Patreon : https://www.patreon.com/kazitoad This is designed with spring loaded retention clips and…
This model is compatible with the lego system.
If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier…
What You'll Need: 18650 Battery Holder - https://amzn.to/4lnV6ej Double-sided Foam Tape - https://amzn.to/4kRXAzW Lora Antenna and IPEX-1 to SMA - https://amzn.to/3FJuHXS Or get this and use your favorite SMA antenna: IPEX-1 to SMA Female…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a simple design for mounting your Govee H5126 “smart button switch.” So you can keep it in one place and move it when needed. I printed this on a Bambu Labs Carbon X1 printer with AMS. I used white Bambu PLA, Though, with the…
Print in High Temperature filament like PETG or ABS or better ------------------------------------------------------------------------------------- Bought a broken mixer of Marketplace for dirt cheap, hoping I could fix it. Found that the…
I wanted a case that used standard 18650 batteries for my Xiao NRF kits that also had a power switch. You'll need some switches like these (2MM): https://www.aliexpress.com/item/1005005531658132.html Battery terminals like these:…
A base mount to design a case around for the XIAO nRF52840 & Wio-SX1262 kit. No screws or glue needed, the kit just clips in place. Enjoy!
This model is compatible with the lego system.
This model is compatible with the lego system.
I don't know why but i really like to design gearboxes. This one has a ratio of around 126:1 and uses herringbone gears. It works pretty well and can be used for whatever purpose you want( use grease for better performance ) I also…
This model is compatible with the lego system.
A minimal snap-fit case designed for the Raspberry Pi Pico and Waveshare SX1262 LoRa Node HAT. Features Opening for female SMA connector Opening for micro USB cable Internal standoffs to hold the Pico in place Trough for the HAT’s headers…
Drive/transmission gear for a Vtech Remote Racer gearbox. The original was some soft plastic that quickly wore out, unlike the other similarly sized nylon gears that are also in the gearbox. The new PLA gear works well but is noisier, so…
This Slim case for a (directly soldered) XIAO nRF52840 & Wio-SX1262 Kit and a 50x60x7mm LiPo. To increase the visibility of the status LED, stick a short piece of transparent filament in the bigger of the two holes and trim it flush.…
This model is compatible with the lego system.
The Makigai MaiMai P126 is my favorite vehicle in Cyberpunk 2077, and I think it doesn't get nearly as much love as this tiny little guy deserves. So I modeled up a version for 3d printing, making sure it can still roll around. Now you…
Fiat 126p keychain with "126p" inscription Print Settings Printer: Bambu Lab P1S Rafts: No Supports: No Infill: 15 Filament: eSUN PLA Category: Keychains
A minimalist case for the XIAO nRF52840 & Wio-SX1262 kit. It is designed to be small and portable using the internal antenna. It is designed for a 650mAh 18350 battery, which is enough to power this hardware for several days using…
Fiat 126p Car silhouette model on a stand! It's perfect as a desk decoration. The model includes a set consisting of a car silhouette and a stand. The Fiat 126p is a small city car produced from 1972 to 2000. This model is an icon of…
Just change color on specific layer in slicer to make it dual color
This is a remake of the M1126 IVC. I opened the slats, they are see through now..
One of the largest mass-produced cars in this galaxy
Fiat 126P, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle for better detail.…
This is a 1:1 copy of the original MB W126 side skirt fastener. Printed in PETG. Print settings: -0.1mm layer height -Organic supports -4 perimeters
This model is compatible with the lego system.
This model is compatible with the lego system.
Rugged box case for 2x NP-W126s Fujifilm Batteries, nice and slim for taking it with you in your bag. You will need 3x M3x20mm Screws. Edit 2025/01/06: Updated the lid to have more clearance to close easier without interfering with the…
Normaler Trichter mit großer Öffnung (D 126/40) unten und Öse zum Aufhängen. Geeignet für dickflüssiges Medium.
Ein kleiner Handgriff für Schnellspann-Bohrfutter mit Sechskant-Schaft (z.B. WOLFCRAFT 2625000) oder Bit-Halter. Das Bohrfutter oder der Bit-Halter werden durch 3 Rastnasen im Inneren des Handgriffs gehalten. Der Griff ist am Ende mit…
Suporte Base P/ All In One Positivo Union C1260 C1000 K3230
🇩🇪 Beschreibung (Deutsch) Ich habe ein Gehäuse für den Wireless Tracker (ESP32S3 + SX1262 + GPS, kompatibel mit Meshtastic und LoRaWAN) entworfen. Das Board verfügt bereits über ein integriertes GPS-Modul, es muss also kein zusätzliches…
Helloo! Here’s my second case for Meshtastic ! This time it’s designed for the ESP32 with the SX1262 from Seeed XIAO , using soldered pins. To reset the device, just insert a Bic ink tube through the hole to press the reset button. Extras…
A minimalist door hanger for a wc room, designed in the iconic single-line style known from the 1970s cartoon “La Linea.” The simple, playful silhouette and clear shower symbol make it perfect for homes, hotels, gyms, or wellness areas.…
A few parts for my Craftsman Bench Grinder. Bulb shade is extended so one can use automotive blinker bulbs. Glue some aluminum foil inside to act as a reflector. Bulb Shade - Part #21126025 Knob - Part #21126010 Tool Rest - Part #21126035…
Casing for Raspberry Pi Zero + Waveshare SX126X LoRa HAT + OLED 1.3 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Simpler Schaltknauf für den Fiat 126 oder 500, mag auch bei anderen passen aber das weiß ich nicht. Der Knauf wird per Klemmung fixiert.
Printed in Eryone PETG Gray, print with supports 50% infill. fits 100%.
This model is compatible with the lego system.
This is the Wither set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…
This is a remix of the Seeed XIAO ESP32S3 & Wio-SX1262 to mount the antenna vertically. No supports needed I added a light pipe and wall mount.
The switch_mount_bdy_v4.3mf is an mount for switch with other dimensions than the original model.
Screwdriver and bits holder for Zack Freedman's Gridfinity organization system. Holds: Sequre ES126 Electric Screwdriver iFixit Screwdriver Standard 4mm bits that work with both
Quickly knocked together a holder for two fujifilm NP-W126(S) batteries
These are spacers for Ducati Multistrada windscreen that hold the screen about 23 mm above the stock mounting surface. They are intended to reduce helmet buffeting and should also fit 1200 and 950 V2 models. How well these work varies…
I make a few tweaks to this great case to fit my requirements. Additional parts required: 500mAh battery approx 39x17x9mm Slide switch 19.5x6mm 4x 2mm hex head bolts and heat inserts (I just pushed them it) Belt clip 2.5mm hex head bolts…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 After finding the original model incomplete, coloured wrong and with an extra unrelated part included I decided to fix this for myself and others, as it seems to be the same broken KiCad export in all the places the original…
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Compact case for a Xiao NRF52840 + Wio SX1262 with a 2000mAh 103450 cell. There are 4 mounting options: Without switch: 1 - XiaoNRF with the original adhesive antenna. 2 - XiaoNRF with Ipex-SMA pigtail. With switch: 3 - XiaoNRF with the…
I'm using the Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit for Meshtastic & LoRa as a leaf node (a node at the end of the mesh’s branches) for integration with services like Meshmonitor and Home Assistant. It's a great, minimal node when…
Designed with ABS in mind for the marine environment in lots of sunlight. Printed on Bambu P1P with standard 0.2mm layer height. This was modeled in the non-commercial version of fusion, this design is not a 100% copy of the original…
Multiboard Mount for a KNIPEX 12 62 180 Wire Stripper You can find the editable original file in Onshape: https://cad.onshape.com But if you go this way, I would still appreciate a download and a like here.But if you go this way, I would…
You need to use support. I printed a piece with a clip on the side .
This model is compatible with the lego system.
You will need: 4 M3*8 screws. An IPX/UFL to SMA connector. A 0,96 inch OLED display. The simple WiFi / Bluetooth antenna which comes with the ESP32S3 / Wio-SX1262 set. 4 wires and a soldering iron for connecting the display. Connect the…
35mm adapter for 126 instamatic cameras. Found that the original model didnt fit my weird camera so I adjusted it for fit and changed the activation window location. Takeup spool also modified with longer spokes so it engages the spool…
This model has some space removed internally on both the case and back cap in order to fit desired components such as a tactile button, .96 OLED Screen, and a INA219 voltage meter. The meter allows the user to view voltage state on-board…
Mesh node using a ASTM F2158 PVC vacuum tube and a XIAO nRF52840 & Wio-SX1262 kit. Parts needed: -ASTM F2158 2'' PVC tube cut to 130mm + the length of your antenna -ASTM F2158 2'' PVC tube cap -6x M3 x 12mm bolts (Stainless) -2x M3 x 8mm…
Tube rings for my 76mm Newtonian. Diameter of the tube is about 126mm, so the rings should fit larger tubes also. The dovetail plate can be attached by 1/4" screws. Hole size is sufficient to allow to sink 3/8" to 1/4" metal adapter in…
Casing for Raspberry Pi Zero (with dongle) + Waveshare SX126X LoRa HAT + OLED 1.3 - (Resin) This casing is from our first product line SnapBox by DIYBlender.com . For more casing examples, visit here . For more pictures, visit here .
Enclosure for XIAO nRF52840 & Wio-SX1262 with 18650 Battery Holder and TP4056 USB-C Charger This enclosure is designed specifically for the Seeed Studio XIAO nRF52840 combined with the WioSX1262 LoRa module , providing a compact and…
M1126 Stryker Infantry Carrier Vehicle Wall Art Silhouette model. Adjustable size. I accept model suggestions
I really enjoy this enclosure as it is tough, light, and adaptable. I would also like to test other radios, since the case leaves some room for exploring. I used double sided tape or hot glue to keep the chips in place. EDIT: After…
XIAO nRF52840 & Wio SX1262 Kit with mounted antenna, 18650 battery, and a battery charger. The nRF chip is pretty jammed in there, it's a bit finicky but gets the job done. Might update the model to have stress relief lines in the lid for…
This part is originally made of plastic, and has a tendency to break. Replacement parts are only available as an assembly which is very expensive, relatively speaking. Other models available do not fit nicely, or are weak, so I made this…
The changes I made: Rotated the board & moved the USB port to the side instead of the top. (edit, both top and side versions are available) I used a 1.3 OLED instead of 0.96 (pls excuse my old eyes). Widen the case size (width and…
Weiche Backen für einen Schraubstock. Zwei Neodym Rundmagnete sorgen dafür, dass die Backen sich im Schraubstock halten. Das eingebrachte waagerechte Prisma dient der Aufnahme von runden Bauteilen, damit sich diese bei Belastung nicht…
This is a ES126 grip and cam lever for pressing the button. Partially remixed from https://www.thingiverse.com/thing:2805221. The grip is molded on a Wera 2mm hex driver and is extra comfy in the hand. I had to recreate all of the files…
My daughter wanted more slides for her Lego sets, but couldn't find any to buy, nor ANY stls to print, so I made my own. It took an ungodly amount of time and some serious frustration along the way to make it. It's not perfect, but it…
Same as my original 100-dart tray, but downsized to fit in a Sheffield 126XX Field Box. Each color of field box has a different part number, so check the tags to make sure your part number is listed. I sized this for build plates smaller…
Really useful battery holder to keep the batteries within reach, great for multiple scenarios! I made it in tpu to have the best fit, it also protects the connector on the lower side.
Print in place vintage vehicle fiat 126 called "maluch"
