1 / 6
Lens Caps (one part print) - 40.5 mm, 52 mm, 58 mm - Added support under springs — zdjęcie 1
1 / 6

Lens Caps (one part print) - 40.5 mm, 52 mm, 58 mm - Added support under springs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Lens caps in various sizes (40.5, 52, 58) printed as one part.

Ocena
5 / 5
Polubienia
13
Pobrania
271
Wydruki
5
Wyświetlenia
733
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Changes:

  • Added small supports under the springs, as with PETG I was getting spaghetti.
  • Added x40.5 model with extra depth
  • Added 58 model with normal depth

Available sizes:

  • 40.5 mm + x40.5 mm with extra depth
  • 52 mm + x52 mm with extra depth
  • 58 mm + x58 mm with extra depth

Print the same as with Boopidoo's version (no support!!!).

Print without support. After print, place the cap with button towards a hard surface and push firmly until it snaps loose. Do the same for the other side. There's only a 0.3mm gap in the design so it will probably stick together somewhat. I've printed in 0.15mm PLA and PETG.

Samsung and Fujifilm logo was added in OrcaSlicer.

Tagi