Smooth Feeding, Dry Filament: Dry Box Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament dry box spool mount for smooth operation with an easy detachable center screw mount for budget dry box.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I was looking for quite some time to find a solution of an inexpensive good quality dry box fitting my filament spools and offering smooth rotation and easy replacement of spools.
Long story short I ended up remixing a few designs. Now, I am really happy with this solution and I would like to share it with you.
Thanks to all the original designs!
==================
Tested Spools:
- 300g - 1000g
- max. 70mm x 202mm
- PolyTerra, Creality, Purefil, Bambulab, azure film
Assembly Guide:
- Connect the screw with the nut
- Add the bearing holder and the bearings
- Add the bearing cap and glue it
- Use the mount guide to markt the drill holes
- Drill the holes
- Attach the screw mount in and outside with M3x(6-10mm) with hex nuts
Print Guide:
1 x Screw_Mod_v2
1 x nut_mod
2 x Inside_Mount_mod
2 x Outside Mount (from @Rosco)
2 x bearingholder (from @bradm10000)
2 x bearingcap (from @bradm10000)
2 x Mount_Guide
(if you use a different dry box you can use the fusion 360 file to adjust the length of the screw - Spool_Holder_Screw v8.f3d)
What you need to buy:
