Smooth Feeding, Dry Filament: Dry Box Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament dry box spool mount for smooth operation with an easy detachable center screw mount for budget dry box.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 29
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Share Alike
I was looking for quite some time to find a solution of an inexpensive good quality dry box fitting my filament spools and offering smooth rotation and easy replacement of spools.
Long story short I ended up remixing a few designs. Now, I am really happy with this solution and I would like to share it with you.
Thanks to all the original designs!
==================
Tested Spools:
- 300g - 1000g
- max. 70mm x 202mm
- PolyTerra, Creality, Purefil, Bambulab, azure film
Assembly Guide:
- Connect the screw with the nut
- Add the bearing holder and the bearings
- Add the bearing cap and glue it
- Use the mount guide to markt the drill holes
- Drill the holes
- Attach the screw mount in and outside with M3x(6-10mm) with hex nuts
Print Guide:
1 x Screw_Mod_v2
1 x nut_mod
2 x Inside_Mount_mod
2 x Outside Mount (from @Rosco)
2 x bearingholder (from @bradm10000)
2 x bearingcap (from @bradm10000)
2 x Mount_Guide
(if you use a different dry box you can use the fusion 360 file to adjust the length of the screw - Spool_Holder_Screw v8.f3d)
What you need to buy:
