Euro Pallet Beer Crate Scale 1/10
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carry your thirst away
- Ocena
- 4 / 5
- Polubienia
- 80
- Pobrania
- 140
- Wydruki
- 2
- Wyświetlenia
- 1166
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This silly little part takes one beer can (and also other beverages too of course) in order to be hauled around with your RC truck. It fits nicely in top of a 1/10 scale euro pallet. The crates are stackable.
Note: Only 0.33ml (roughly 11.15oz) cans with 116mm lenght and 66mm diameter are going to fit.
Printing:
Print all parts in the given orientation. no support needed. There are two versions available for the long and short side part. One has smal “rivets” on the side for decoration purposes.
Assembly:
Slide all parts together like seen on the picture below. Make sure to have the dot on the post part always face upwards and towards the smal side. Fix everything in place with a drop of superglue. Done :)
Looking for smal cargo straps or other related stuff for you to haul around? Maybe have a try with this collection:
https://www.printables.com/@firstgizmo/collections/1472180
PLEASE NOTE:
This Beer Crate Holder is intended to be placed on this specific euro pallet:
https://www.printables.com/model/845194-euro-pallet-europalette-110-scale
