1 / 3
Bosch L-BOXX magnetic holder(IKEA HULTARP) — zdjęcie 1
1 / 3

Bosch L-BOXX magnetic holder(IKEA HULTARP)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cheap magnetic holder with an IKEA HULTARP for my Bosch L-BOXX to hold tool accessories

Ocena
0 / 5
Polubienia
28
Pobrania
44
Wydruki
0
Wyświetlenia
687
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Why I made this

I wanted a compact and smart way to store my multicutter accessories in my L-BOXX. When I saw a magnetic knife holder(HULTARP) at IKEA, I thought it would be a great idea to install it in my L-BOXX.

 

How to print it

I printed it on my Creality K1C with Blue ASA (by 3D Jake) to give it a litle more strength than generic PLA. but it should print on other printers and other filamentbrands just the same. I used supports for the two screw holes. 

 

I printed it with a 0.4 Nozzle and 0.2 Layerhight and used 30% infill.

…my standard settings for simple prints.

 

How to mount it

First of all, you need two of these adapters.

Insert the M5 nuts into the slots of the two parts. than use 2 selftaping screws to scew the part into the L-BOXX.

But please be careful, the material of the L-BOXX is somewhat fragile, so don't tighten it too tightly.

then take the Asably of the IKEA HULTARP and screw it to the parts to be printed using two M5x8 screws.

 

Place the magnetic side of the IKEA HULTARP over the asambly and you're done.

Now you can sort and enjoy your new magnetic holder.

 

Tagi