1 / 2
20 mm Inner Diameter Pipe / Sleeve — 1 mm Wall Strength (Model Variant) — zdjęcie 1
1 / 2

20 mm Inner Diameter Pipe / Sleeve — 1 mm Wall Strength (Model Variant)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

20 mm inner diameter pipe / sleeve — labeled with 1 mm wall strength — 3D printable part for DIY -structural application

Ocena
0 / 5
Polubienia
3
Pobrania
188
Wydruki
0
Wyświetlenia
419
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

This is a 3D printable pipe / sleeve with the following design intent:

20 mm nominal inner diameter

1 mm wall thickness (see Notes)

Model currently shows ~36 mm outer diameter → additional wall / features may be present

Model length ~22 mm in print — file name indicates 50 mm

Dimensions

Inner diameter: 20 mm (design intent)

Wall thickness: intended as 1 mm → actual model shows outer Ø ~36 mm → may include extra walls

Outer diameter: ~36.00 mm

Length: ~21.97 mm (printed result — please verify your slicer / model scale)

Print Settings

Layer height: 0.15–0.2 mm

Infill: ≥30%

Supports: Not required (depending on orientation)

Recommended materials: PETG, ABS, ASA — PLA works for non-load bearing applications

Notes

⚠ The model file indicates "1 mm wall strength", but the measured outer diameter is ~36 mm → this suggests that additional wall thickness or features may have been included in the model.
⚠ The printed height is ~22 mm, not 50 mm → check your slicer settings or model scale if you require exact length.

Designed for press-fit or slip-fit use, depending on your printer and tolerances.

Tagi