20 mm Inner Diameter Pipe / Sleeve — 1 mm Wall Strength (Model Variant)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
20 mm inner diameter pipe / sleeve — labeled with 1 mm wall strength — 3D printable part for DIY -structural application
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 188
- Makes
- 0
- Views
- 418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
This is a 3D printable pipe / sleeve with the following design intent:
20 mm nominal inner diameter
1 mm wall thickness (see Notes)
Model currently shows ~36 mm outer diameter → additional wall / features may be present
Model length ~22 mm in print — file name indicates 50 mm
Dimensions
Inner diameter: 20 mm (design intent)
Wall thickness: intended as 1 mm → actual model shows outer Ø ~36 mm → may include extra walls
Outer diameter: ~36.00 mm
Length: ~21.97 mm (printed result — please verify your slicer / model scale)
Print Settings
Layer height: 0.15–0.2 mm
Infill: ≥30%
Supports: Not required (depending on orientation)
Recommended materials: PETG, ABS, ASA — PLA works for non-load bearing applications
Notes
⚠ The model file indicates "1 mm wall strength", but the measured outer diameter is ~36 mm → this suggests that additional wall thickness or features may have been included in the model.
⚠ The printed height is ~22 mm, not 50 mm → check your slicer settings or model scale if you require exact length.
Designed for press-fit or slip-fit use, depending on your printer and tolerances.