Counting matching models…
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
Note, most of the parts are compatible with the original tower system, so you can use those too. Some parts of the original system with a low bottom might not fit with the new parts that have an internal pipe, if the top part has low…
Simple brackets to mount the T8 lights onto a Hydroponic Tower this is made for 8mm rods as the “arm” one bracket is for easy mounting using zip-ties.
Modular Hydroponic Tower made for 2inch Net Pod this is the best model as of now and its a world of difference with the other one. the fact that you dont need to spend hundreds of hours more to print the net pods, simply use cheap…
I originally made a modified 6 pod section which has integrated mounting tabs but figured a mounting section which attaches to the regular 3 or 6 pod section would be more useful. Uses 4x M5 bolts and nuts to mount.
I recommend PETG for this print. Use the top cover to prevent light from getting inside. GymBeam and Optimum Nutrition containers are confirmed to fit. https://en.wikipedia.org/wiki/Kratky_method
The Gamma2 buckets come with a screwable lid (vs lids that “snap” on) and a cross section directly through the center. This is an adapter which connects to the Modular Hydroponic Tower…
Update 31.05.2025: There is now a sealing ring that is placed between the individual elements. This ring additionally stabilizes the tower. The sealing ring have to be printed in TPU! My tower is getting on in years and the individual…
Hydroponic system for 1" rockwool cubes using nutrient film technique in 2x3" vinyl downspout.
This is a print-in-place model with no supports. You'll need to print these 2 parts four times. Then flip two of the parts to create the circle. The circumference of the tower was approximately 14.25 inches, resulting in a diameter of…
The lid is 36.9mm by 56.9mm for a tower I bought off of amazon. It has a lip and should fit snugly. This was my first attempt at 3d modeling for 3dprinting so it's far from perfect!
Hey, we designed this hydroponic tower after we tried some other models here. Unfortunately, we were not happy with other models for our usecase. We want to grow up fruits ad vegetables. We needed more stability and bigger pots, so I…
This is a simple hydrometer, humidity meter, holder using three 8x3mm magnets. You can replace the hydrometer battery without removing if from the holder. You can use any material to print it. I used PETG. Hydrometer:…
This is a replacement fin for an HF stand up paddle board. The fin geometry isn't a perfect replica but should work well enough, and the locking mechanism is tested and works. The part prints fairly well without supports, but would…
Description Experimental vertical hydroponics system I have designed for growing Herbs indoors. Things you will need for the assembly: M5x40 button head cap screws (x18) M5 nuts (x18) M8 threaded bar (730mm minimum) M8 nuts (x8) M8…
The sign goes around the Jiffy pad where I grow the seedlings in. Once the seedling is big enough I put the substrate pad on the pin and put it into the tower pot. You might not want to put it in too deep which helps the small seedling…
Der Turm ist noch im Versuchsstadium und wurde noch nicht vollumfänglich getestet, gerne eure Erfahrungen mit mir teilen, wenn etwas nicht passen sollte. Neuer Turm, um größere Abstände zwischen den einzelnen Modulen einfach zu…
Hydrometerhalter für 18mm Holzregale, zwei M3 Schrauben benötigt.
had a few extra screw holes free on my BMCU after mounting it to my A1 Mini, so thought I'd make a little Hydrometer holder. It uses two of the screws that come with the BMCU (M3x25mm IIRC), and should work with all the variants of the…
Estensione della vite, lo utilizzo per rendere più resistente l'idroponica usando il vaso sortera per infilarlo dentro il sostegno https://www.printables.com/model/1478576-stutzrohr-hydrotower-sortera-60l Il sostegno di cui sopra dovrà…
This is a remixed keyhole hanger for the Govee H5075 Hygrometer/Thermometer . I made a few small but practical changes to the original hanger design to allow the thermometer to be more easily and consistently oriented when hung,…
una versione ribassata di 2 cm per adattare la vite del coperchio che ho remixato
🌱 Semi-Hydroponic Planter A simple semi-hydroponic planter with a two-part design: outer ribbed pot (water reservoir) inner cup with drainage holes for the plant and substrate Designed for use with LECA and other semi-hydroponic setups. 🖨…
Simple replacement net cup for the Harvey hydroponic system. The size and form does not match the original net cup so no guarantee that the original plugs fits without modifying them a bit. Changed it to make it simpler to 3d print.…
This is a custom-designed cup holder adapter for the 2013 Kia Rio , specifically for the front passenger door. If you have a large water bottle (like the BOZ brand, Hydro Flask, or Nalgene), you know they never fit in the standard center…
The remixed files here are what I used in my setup -- based on Modular Hydroponics Tower w/ Grow Lights , together with the Lowes 5-gallon bucket lid . I also have a remix of the led arms which I will upload later.
This lid is design so you can use an Ikea Fniss as a water deposit for your hydroponic tower
When my daughter used the handle to open the bottle she lost one of the pins that holds it in place. Printed in PCCF, then glued it in the hole with the handle in place. MAKE SURE YOU DON'T GET GLUE ON THE HANDLE. If you plan to put it in…
If you have a Bosch Aquastar tankless hot water heater that stops powering the igniter circuit, this part may save the day and a few hundred bucks in replacement parts. To test if this fix will work for you, simply hold a neodymium magnet…
I designed it to work with standard bathroom shower connections or through additional garden hoses connectors, it spins the roller to flush out paint and dry it simultaneously. Water Connection: Standard ½” BSP thread (fits a typical…
NerdQaxe++ Hydro support. Added model V2: The two bottom anchors have been brought closer together in the center since they are only used for support and thus do not collide with the AM4 structure that supports the AIO head. Much more…
Valdr the Hydro stood as if he had risen straight out of the sea and forgotten to drip. His face was a map of currents and tides—layer upon layer of hardened waves, frozen mid-roar. Bands of deep ocean blue and sea-green carved his…
Hydroponics Garden v1.1 is a compact and modular hydroponic growing system designed for indoor use. It is ideal for growing herbs, lettuce, and other leafy greens using minimal water and no soil. The design is optimized for 3D printing…
Minimalistischer Halter für einen Runden Hydrometer mit 5x3 mm Neodymmagneten
Modular Concrete Hydroponic Tower - Spiral Mold System (BETA) ❤ Support the Creator / A Special Request If you love this design and want to see more ambitious and complex projects like this come to life, please consider purchasing the…
Edit: I found that one of my prints developed a leak between the printed layers. I am not sure if using a .6 would fix that or not, or changing wall thickness. I added a lid that fits an ice cream bucket from an ice cream shop. It works…
Bracket that holds 4x3 vinyl downspout. Remixed version for larger downspout.
這是一款為水耕系統設計的 極簡風定植籃 ，以乾淨俐落的結構，提供根系最大的生長空間。 整體採用高透通設計，側邊大面積開孔，有助於： 根系自然伸展、不纏繞 提升水流循環與含氧量 降低積水與悶根風險 適用於 3.3cm～3.8cm 直徑開口 ，常見於 DIY 水耕箱、育苗盤、3D列印水耕盆栽等系統。 簡約外型不搶植物視覺，特別適合生菜、香草、草莓等小型作物。 This minimalist hydroponic net cup is designed to provide a…
Description I designed this to remove the stubborn tops on HydroJugs. It is a simple design that works great, no more needing the oven mitt for additional grip. There is a hole in the bottom for to hang out of the way. I tied a string to…
A modified version of @Hydrotatic CC-BY-NC-SA work without the year on the side, allowing for customization. This can be done in CAD software or a Slicer. If you are adding text in a slicer the "Use Surface" and "Per glyph" are useful to…
Erhöht deinen normalen Mars Hydro Auto-Drainage um 7 cm. Perfekt, um mehrere Pflanzen auf ein gleiches Niveau zu bringen . Modell kann ohne Stützen gedruckt werden und sind ineinander Stapelbar . Viel Spass
A quick remix of dousto's excellent remix of Luitzor's original tower. Rotates segments at half the golden angle to create a pleasing phyllotaxis-inspired spiral which maximizes light distribution. I've included the step and stl for the…
Hydrometerhalter für Geeetech Spulen 75mm Innendurchmesser der Halter ist zum einfachen einlegen in Geeetechspulen er rastet nicht ein, sprich er ist perfekt für das lagern in Vacumbeuteln.
Grow herbs like basil and oregano in your kitchen all year round. This indoor planter uses a passive hydroponic system, so it doesn't need a water pump and is completely silent. The setup is modular, and you can easily adjust the height…
Printed on protopasta petg and then sealed with Diamant. You can put in small PP colored fishing hook balls that float in order to see when the water has ran out at the bottom.
This 3D printed hydroponic netpot (Ø8 cm) is specifically designed for 4×4×4 cm rockwool cubes . Unlike standard netpots, this design eliminates the need for clay pebbles or other growing media. The structure securely holds the rockwool…
This is a custom top handle for a hydraulic handbrake witch MIKU and 01 Text, specifically designed to house an M8 nut. The model features a multi-part design, allowing for clean multi-color printing without the need for manual painting…
Ein Terrassenmodul um deinen Hydroponic Turm zu erweitern. Jetzt auch für das 3 Pot Segment. Du brauchst lediglich M5x16 Senkkopfschrauben um die Terrasse am Turm zu befestigen. Einfach zu drucken. Es wird Support an der Aufnahme…
Deeper full-width cups for the popular Modular Hydroponic Tower Garden
Update: Doing post processing is very much worth it! A good printer, spray filler and a top coat, sanded to a 1500 grit finish creates a mirror finish. This is probably the easiest/fastest way to make a stabilizer since it only needs a…
2 gallon lid for Modular Hydroponics tower.
My hydroponics towers are on a rotating base plate . Rotate In order to keep the dispenser working AND keep the tower free to rotate the feed hose has to be free of the dispenser. So I removed the hosebarb and center and stuck the hose…
This is a project for a college course where the goal is to create a hydroponic tower that aims to reduce the sound profile and improve the aesthetics of other similar models. Parts:…
This Cultivation Pod Attachment is compatible with the modular Hydroponic Tower, for example nine 4x4cm rockwool cubes. This allows you to grow your seedlings simultaneously. The pod supplies your young plants with nutrients, while at the…
This model is engineered to achieve a high-precision interference fit by utilizing the controlled thermal expansion properties of PETG. The assembly process requires thermal activation to function as intended. How It Works (Required…
This is a model of an early 20th century water wheel, (now more commonly called a Francis turbine) that is designed for low heads. Instead of wicket gates, it uses a cylinder that throttles the flow going into the runner by lowering the…
The silicone collar that keeps cans from falling out of my Hydro Flask 12oz Cooler Cup has gotten stretched out over time and no longer retains a can securely. I could buy a new one for ~$2 and 30 seconds of my time, or spend 10 times as…
Designed some replacement spacers for the SilverStone Hydrogon D140 ARGB CPU cooler. They should be pretty darn close to the originals dimensionally. I still have my originals but the geometry was simple enough to whip these up for anyone…
I created this spacer to mount the four-armed rings and terraces.
Just a small three part print for a water level for a printed hydroponics tower: rod, floater and fitting. For some reason the rod came out slightly oval, but I still could screw it into the floater part. I used three M3 bolts and nuts to…
3d-print your own hydrofoil wings and save hunderes of dollars $$$ I recommend using a big nozzle. A .2mm or .6mm layer height won't affect the finish. When it's covered by fiberglass. Don’t use more than 10% infill. The 3d printed core…
Hydroponic garden system (like IKEA vaxer). 3 of these 6-cell modules fit in the basic Ikea Greenhouse (model: SOCKER) Print the vase in "vase mode" with one layer. If you printer cannot do that, try the "thicker-vase.stl" file. I used a…
I'm currently using this light: https://www.amazon.com/dp/B0BCVHMJ46?psc=1&ref=ppx_yo2ov_dt_b_product_details You may or may not need supports depending on your printer settings
Accessories for the TowerGarden – towergarden(dot)com Instead of the two upper floors of herbs, you now have 8 more normal places at half height. Requires 12xM4 12mm screws and matching nuts Only chemically inert and food-safe materials…
Hydroponic Planting System is a remix is not only my designee, and I think maybe some of you will like and need one I have adapted to my designee the pot support and the lock mechanism. The module has 3x planting spot's with a 3mm wall…
This is a hydroponic trough drain for rectangular trough NTF systems http://en.wikipedia.org/wiki/Nutrient_film_technique . It's also useful for draining tubs and barrels and uses a standard (even in this metric world) 3/4" BSP threaded…
This is a small pot for raising plants with hydroponic. The second Inlay(water) is for use with the smallest “Leni Hydrokultur”-Waterlevel gauge. (For this Inlay you need support) Prevent waterlogging with the raisers (3 or 12 mm) use 5…
I took the stream breaker and added a cylinder to the top so it can be held down by the lid. I also added some fillets around the legs for strength. I'm not actually sure how people have been attaching the original stream breaker, but…
Low weight and time, easy printing hydrometer mount For installing in the BambuLab: with the hydrometer's face up, insert the legs first and rotate forward until the whole assembly is inside the mid compartment, then drop it and it would…
Ich habe für den Bambu Lab X1 / P1S einen Halter für den Xiaomi Humidity Monitor 2 erstellt. Wird mit den original Schrauben vom Griff hinter der Tür montier. Bitte mit Stützst drucken. I created a holder for the Xiaomi Humidity Monitor 2…
I designed this US box track tool which is used as a guide to trim masking tape when building a DIY hydrofoil board. If you find this useful and would like to show your support, please buy me a coffee :)…
Original models: https://www.printables.com/cs/model/669456-modular-hydroponic-tower-garden
3D Hydroponic Tower with 4 Openings Overview The 3D hydroponic tower is a versatile and space-efficient solution for growing plants in a controlled environment. Designed with four openings, it allows for easy access to the plants while…
This is a simple water level indicator for the hydroponic tower. I adapted a lid for this and fitted it with a hole and a guide for the swim body. The swim body have to be printed with three outer walls and hollow.
Everything from the original creator, remixer and added a Spacer Adapter to put at the bottom to raise the height due to the conditions of my balcony. Printed in various ESUN PETG, 35 % infill, gyroid. I would suggest a bigger nozzle 0.6…
Provided only with the "plus" models, the HydroRinse allow to clean the hose after usage. This is a remix of an existing model to add an hose mount. https://www.thingiverse.com/thing:5920816
Stand for the long (15" or 380mm) Hydroflask bottle brush . All 3d-printed objects soak up moisture like a sponge--bottom is concave to reduce the contact surface with a wet countertop. Added "stripes" to the model as extra bodies, for…
It is easy and support free to print. Set the infill to 20% minimum.
Now two options for printing - one piece with supports, or two pieces with no supports. I print in PLA+ as in a side by side trial of PLA and PETG the PETG part failed first. Expect to get around 3 years of normal home mowing from the PLA…
Hydrometer case This product has no visible screws on the front and can be mounted on acrylic panels or other flat surfaces. Here I have mounted it in a cabinet where I have used 3MM acrylic. Items to be used for assembly. 4 pcs M3 heat…
I always had problems with my Kratky bottles. Either, they were super hard to refill, or the plant just dropped into the vessel. This adapter fixes that! You can just easily fill the nutrient solution into the funnel, and it will flow…
The bottom “cross” snaps into the net cup and allows it to get fixated. Without the stabilization, it fell over a lot in my DWC. The hole for the net cup is 50 mm diameter in size by default. You can also plug a few 5 mm wooden sticks…
This is a blackout sleeve and cover for 32oz mason jars, for use with Kratky hydroponics. The sleeve blocks light to prevent algea growth. The sleeve fits loosely so the plant can be lifted out to check nutrient levels easily. The cover…
Reddit post with video: https://www.reddit.com/r/Hydroponics/comments/1fe9l4d/3d_printed_ladderpot_for_morning_glory_and_other/ Print settings I've used A1 Mini with: 0.6mm nozzle (so it's faster) 0.24 - 0.3mm layer height 5-7 walls - as…
Use your Presto food dehydrator as a filament dryer, without any destructive changes that would interfere with using it for its original designed purpose. Concept inspired by thing #4856292 , but redesigned from scratch. I really liked…
100x160mm sign, reading “Ban Hydroxylic Acid”. It's just awful stuff; over 80% of the people autopsied in the last 5 years have had detectable amounts in their bodies. Best with color switch above 1mm, as with included gcode file. Also…
Halter für einen runden Hydrometer Befestigung mit doppelseitigem Klebeband oder Heißkleber möglich
Using the container for a Kratky setup. I wanted to put more nutrient solution in the container but the holes prevented that so these are plugs for the holes. Specifically for these Sterilite Stacker Totes, I use the 4 gallon version but…
This “Hydroponics” planter with water feature is designed to allow users to print multiple sections to make a planter with a water feature as tall as you'd like. The only thing you'll need outside the printed parts is some filter…
I needed a cup holder for my water bottle on my 8040 sim rig, but all of the ones I could find online were sized for 1L Nalgene bottles, which are quite a bit narrower than my 1L insulated hydroflask bottle. This one has an internal…
The model from the author in the first link has been modified to be lower (same height as the boxes from the second author , comparison of heights in the third picture) to allow the cap with holder to be mounted on the top without the…
I've notice that the Hydro5 razor blade case has been lacking the cover lately. (And I'm sure that anyone that uses this brand of razor blades have notice as well). So, with the one I still have, I made this. print settings: because of…
