DTF Control Surface Hinge for R/C Airplanes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable hinge for R/C airplane control surfaces in 2 designs and lengths from 100 mm to 500 mm
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 372
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Printable hinge for Dollar Tree Foam board R/C airplanes (or equivalent 3/16" / 4.7 mm thickness materials). Uses a 1 mm pultruded carbon rod as a hinge pin. The designs accommodate deflections of more than 50 degrees in both directions.
Both sides of the hinge use the same part without modification – you can just print two copies of the exact same stl and then rotate one of them around 180 degrees. The hinge pattern repeats every 25 mm, with the initial hinge loop at 6.25 mm from the start. The tabs extend into the foam board providing a secure glue bond.
Both a centerline hinge and an offset hinge design are provided in a range of lengths. A cutting template is included in the files.
The Modular R/C Aircraft Collection
This collection is a set of models for R/C aircraft that I have designed to be generally interoperable and support design and fabrication of a wide range of aircraft configurations:
https://www.printables.com/@Uenbzsto/collections/2458682
Support This Project
If you liked this model, please consider buying me a coffee!
