1 / 4
Magnetic Vise Soft Jaw for 50MM Fork Tube — zdjęcie 1
1 / 4

Magnetic Vise Soft Jaw for 50MM Fork Tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

50mm diameter lower fork tube holder with clearance for brake caliper mounts. Originally for Kawasaki H1 H2 Z1

Ocena
0 / 5
Polubienia
2
Pobrania
27
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution

I originally made this to hold the bottom section of my Kawasaki H1 500 fork tubes. Removing fork seals is annoying, and doing so without marring the aluminum is tough. These clear the brake caliper mounts, and have 6x2mm neodymium magnet inserts. You should be able to press fit the magnets and have them stick to the vise. 

Printed with IEMAI Carbon Fiber PETG AnyCubic Kobra S1, .6 nozzle,5 walls, 25% Infill. Have also tested with 3 walls and seems to work just fine. 

 

 

Tagi