1 / 6
Skeletal Gargoyle Sculpture - Guardian of the Forge — zdjęcie 1
1 / 6

Skeletal Gargoyle Sculpture - Guardian of the Forge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

He sits. He skulks. He judges your slicer settings. Perfect for guarding your desk, shelf, or 3D printer

Ocena
5 / 5
Polubienia
36
Pobrania
107
Wydruki
1
Wyświetlenia
407
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Sculptures
Licencja
Standard Digital File License

He sits. He skulks. He judges your slicer settings.

Perfect for guarding your desk, shelf, or 3D printer.
Requires supports. I printed mine upright with tree supports for clean wings and minimal scarring.

Printer: Bambu Lab A1
Nozzle: 0.4mm
Layer Height: 0.2mm (standard detail)
Infill: 15-20% (Grid or Gyroid recommended for stability)
Supports: Required (Tree supports recommended; ensure good wing and chin support)
Brim/Raft: Brim recommended for stability
Material: PLA or PETG
Print Time: Approximately 4 hours (varies by scale)
Notes:

  • Support removal around claws and chin requires care to avoid damage.
  • Keep superglue handy if you accidentally snap small protrusions.
  • No special settings beyond your typical profile for statues with moderate overhangs.

Tagi