Easy Bolt-Action + T-Pull Mod -- NERF Recon -- Hardware Free
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy bolt action + T-pull mod for the Recon. Just slide it over the rail and fix it with the printed pin.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 48
- Wydruki
- 2
- Wyświetlenia
- 436
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy hardwarefree bolt-action mod with iron sights for the NERF Recon.
T-Pull style priming is also possible due to the both sided bolt.
For installation just slide it over the top rail of the slide until you hear a click and the rail retention snap into place. Then you secure the Attachment with the printed pin.
I made it for my Recon MK2 and it works really well.
(Unfortunately, it doesn't fit the Nerf Retaliator because its slide rail is longer)
My other Recon mods free to download in my Printables.
The files are already pre-oriented:
My print settings for PLA:
0,2mm layer height
5 walls
20% gyroid infill
7 top and bottom shell layers
NO supports needed
use a brim if you have poor print bed adhesion!
If the pin is too loose or too wide due to printer tolerances, scale it a tiny bit up or down in your slicer (but DO NOT scale the length).
Thanks to GinKz for the file I could use for this Remix.