1 / 2
40mm fan mount for 2020 extrusions
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Why I upgraded to an SBASE board which, despite the nice little heatsink on the stepper drivers, could do with a bit…
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 259
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why
I upgraded to an SBASE board which, despite the nice little heatsink on the stepper drivers, could do with a bit of active cooling. So I designed a simple mount for a 40mm fan.
Features
- Fits your standard alumin(i)um 2020 extrusions, so should fit most kossels, AM8's, Hypercubes and what not.
- Metric nuts/bolts (M3)
- Optional slots for nuts (though you don't really need this, the M3 bolts thread nicely into the mount itself)
- Works great with this board mount: https://www.thingiverse.com/thing:1417254
Instructions
- Print it with the flat side down
- .15mm layers is plenty detailed.
- No supports needed
Open Source
As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!
Category: 3D Printer Parts