Hundreds of Metric Headless Threaded Pins for Adding to Your Desing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You want to create a fancy screw? Or you need to attach your design? Take one and add it to your design.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These are metric outer threads, exactly as if they were part of a screw. They can be added to your design. You can use them to create a special custom-design screw. You can use them to mount your design or to attach something to it. My V2 thread design should well fit without considering tolerances.
Please beware. Only the +z end of the respective thread is bevelled, while the -z end of the thread is not bevelled to better attach to your model. I recommend to print the threads with a low layer hight, e.g. max. 0.15 mm for a 0.4 mm nozzle. This not only improves precision but also creates mechanically much more robust threads.
Please find the fitting nuts here: Complete Set of Metric Nuts Version 2
Please report, what you made out of it.