Mercury Oil Tank Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wrench to install and remove the fill cap on a Mercury Marine oil injection tank.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Many Mercury 2-stroke outboard boat engines use a large oil tank. Mercury Sport Jet engines also use these tanks and Sea Doo boats used these Mercury jet drives for several years also. The cap can be difficult to remove or tighten if the tank is located in a position that prevents getting a good grip on the fill cap. This wrench makes it easy to remove or install the cap. I printed the cap with PETG, 0.20 mm layers, 5 perimeters and 100% infill. This design should work with most materials including PETG, PLA, ASA and ABS. No supports are needed. If you have difficulty removing your cap, you will love this wrench.