Canon XF605 Screen Sun Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D printable sun hood for Canon XF605 — simple, durable, and super useful outdoors.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description:
A simple and practical sun hood for the Canon XF605 camera screen — perfect for outdoor shooting when sunlight makes it hard to see the screen.
This 3D printed sun hood snaps directly onto the monitor frame and helps reduce glare and reflections without blocking access to the touchscreen.
Easy to install and remove — no screws, tape, or glue needed.
Print settings:
Layer height: 0.2 mm
Infill: 15%
Supports: Not required
Recommended material: PETG — flexible and durable enough for clipping onto the display
Alternative: ASA for better UV and heat resistance, but it can be more brittle
TPU: possible, but choose a stiffer type (shore 95A+) for best results
The example print was made with fuzzy skin enabled for a nicer look and reduced light reflections.
If you like our work please support us. :-) Buy us coffee at ko-fi.