152 modeli
This rackmount adapter is designed to mount the TP-Link ER605 wireless router in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description: A simple and practical sun hood for the Canon XF605 camera screen — perfect for outdoor shooting when sunlight makes it hard to see the screen. This 3D printed sun hood snaps directly onto the monitor frame and helps reduce…
Wydruk około 1,60 €–1,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Lost the lens cover for my Bosch thermal camera so I decided to recreate it based on photos and share it here in case anybody else needs it. It fits perfectly and follows the original design as closely as it can. There is, however, an…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena jednego wariantu
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
With this design you can mount your TP-link ER605 and OC200 the proper way. You wil also need the Ubiquiti Networks ER-RMKIT. I used M3 10mm screws to screw the printed parts together.
Not the original creator of the case nor the MPU model, can't find the original sources. One M3 screw needed for fastening the MPU
A friend recently discovered the TP-Link ER605 Firewall/Router/Switch, great device for the money! Well I needed a way to mount this in my 19nich rack. This 1RU shelf will allow for 1 or 2 ER605 devices to be mounted. Each mount has a…
This model is compatible with the lego system.
TP-Link Omada ER605 and SG2008P 1U Rack Mount
How to generate label read in 10 inch Keystone Patch Panel with Label description It design not to be a tight fit (to prevent scratching), If you want more secure you can insert pieces of paper between shelve or use m3 screw on pre drill…
This model is compatible with the lego system.
The only lay flat caliper holder models that I could find didn't fit my calipers. I have 2 sets of these calipers that I bought off of Amazon and wanted the set in my workshop to be easier to get to. Example was printed in PLA on a…
This model is compatible with the lego system.
Notice ℹ This mount also fits the "NETGEAR" and “D-Link” equivalents of the equipment mentioned here, since they all use the same chassis from the same OEM's Accton Technology and Delta Networks . Description This is one of my extra…
This model is compatible with the lego system.
This model is compatible with the lego system.
Rack mount for TP-link ER605 router and/or TL-SG108PE switch Files are only provided in one direction, don't forget to mirror to make the complete 1U unit Holes are 3,5mm. Use M3 screws and nuts. I had to redrill. I printed mine in very…
I suggest this being used not only for bed slingers, but also for any printhead. Just glue it somewhere…
Pretty simple print. I printed at 10% infill, .3mm layers with 2 perimeters. It's not a perfect fit, but it holds it great, and it doesn't cover any of the light. Hopefully this doesn't violate any IP rules-- I measured the lightbar and…
A wall mount for a Lenovo Tab M10 TB-X605F with built in cable routing hiding the USB cable. The backplate and the front panel is held in place with 2x6mm magnets. Glue the magnets to the pillars in the lid, they latch onto the screws…
This model is compatible with the lego system.
This is a battery cover for the Vinca DCLA-0605 caliper. The Vinca DCLA-0805 (notice the different model number) battery cover fits for this model, but comes off almost as easily as the original piece. I've resized it to fit tighter on…
Remix of @DevineJimmi ‘s 10 inch ER605 rack mount , I’ve added a couple of keystones to help with routing WAN etc in my mini rack. Removed the text too to make it easier to print for me (hope that's ok, please check out the original!)…
Adaptation of the production grade "Z-Upgrade" for VCORE 4.0 Upgrade to replace the original Z with a ballscrew system. More precise, very reliable over time, offers a very high repeatability in the Z movement compared to a trapezoidal…
I use a MPU6050 to calibrate the Input Shaper of my printers, so i've modeled this to make the process easir. Just print it in the middle of the bed, then screw the MPU.
Mobil Power Supply WZ3605E Makita 18V BOM: 1x WZ3605E Power Supply 4x M3 Heat Insert 1x Banana Plug Socket 1x 21mm Toggle Switch 2x M3x10mm Screw (Mount Top and Bottom Part) 2x M3x20mm Screw (Mount Top and Bottom Part) 1x Automotive Fuse…
This is a small and easy to build reaction wheel. I do not recommend building this project to beginners as it is quite hard to stabilize and properly calibrate the PID algorithm. More information about the project: Code can be found on…
This model is compatible with the lego system.
This is a holder for the Stanley 66052 6-Piece Precision Screwdriver set. It is meant to attach to insert-empty.stl and go on your Honeycomb Storage Wall. OnShape document
Half-width (9.5") rack mount for TP-Link ER605 Omada router. Mount the router using two M5 bolts.
This model is compatible with the lego system.
lego 60800 60603 62113 6154 60621 2377 4863 6556 4035 60596 57894 60599 57895 60623 28327 42509 60806 80683 42205 60616 92589
I wanted to fit some 4x6 lights i had on hand to my 92 Toyota with 5x7 or 6054 sealed beams. These are adapters with no retention currently because i had planned to epoxy the 4x6 inside them. I will release a version with bolt on…
My Ender 3 v2 Neo is on klipper and I wanted to give resonnace compensation a try. I had an MPU-6050 laying around from an ESP32 kit so I modeled a mount for it in Fusion360. It takes around 11min to print. I recommend to print it in the…
sorry for the scale it was designet wrong so you need to print is at 10% scale
Needs 2x countersunk Screw for Rigmount is designed for M8 2x M6x30 socket head screw & 2x M6 nut for mounting the light. the design allows for about 30degree of tilt in each direction
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Einfache Halterung für einen TP-LINK ER605 Router. Senkrechte Montage in einem Serverschrank, passend zu den höhen Einheiten. Gedruckt habe ich es aus PETG Zur Befestigung habe ich Senkkopfschrauben in M4 genommen es passen auch 4mm…
Solid mount for an Abus Borgo 6500 Lite. You can install it on the top tube of the brompton with 2 ziptires. You also need a strap (≤ 30mm) to secure the lock.
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! Click the link to get to V.2 of this part:…
Lego round flat tile 2x2 with hole 15535 or 6055313.
The model is a complete solid shell of the MG 605 Merry Fisher boat. The boat comes with a separate stand 3d printable file. Please follow me and comment with your opinion on the product so I can enhance and develop! For custom designs…
I took the Wall mount for Netgear mini 5-port switch by nigelayres, and scaled it up and hollowed out a 115mm x 149mm opening to allow for my fs605. Added screw mounting holes as well. Print Settings Printer Brand: FlashForge Printer:…
This model is compatible with the lego system.
A very simple, but very secure and stable mounting option for an ADXL/MPU6050 module, utilizing the two m3 inserts on the back of the Voron 0.2 x-carriage, which most alternative toolheads (like the amazing dragonburner ) do not utilize.…
See original model for addtional info: https://www.printables.com/de/model/713752-adaptec-71605-fan-mount
Resized to fot the GS605 Switch firm fit. Printed on QIDI Plus 4. Used 0.4 nozzle with the 0.16mm preset. 3 walls and 15% infill, use QIDI Black PETG Tough filament w/ supports. If you download it, please hit that like button.
Designed to be able to mount a TP-Link TL-SG605 5 port ethernet switch to a wall with #6 screws. I printed with Inland PLA Twinkling Black and it printed great
check the video below. tells you all about it. When 3d printing it. you have the main case and the back cover. you can print the main case in all one go, place flat against its back. and put some internal supports. if you want to modify…
This is a case for the MPU6050 GY521 gyroscope/accelerometer module with fischertechnik connectors. The 2x6 I2C pin connector is pin compatible with ftDuino and fischertechnik TX connectors. See the pictures for assembly details. A…
This is a Z-Upgrade 3.2d-H iteration (H, for heavy), It answers the need to make a very tall printer (800-1500mm) It features a new Starlock unit, with M5 square nuts to withstand the load The bottom plate of the VC4 need some…
Print X axis mount and 2 washers. Use washers to protect board from screw heads. Requires 4 M3 screws, 10mm length. Replace 2 factory 6mm screws with 10mm. Mount adds +4mm thickness. When ready to calibrate Y axis, print mount in…
I wanted to rack mount my ER605 router and POE160S POE injector on the same unit. You need two M5 bolts to connect the two halves. It's a bit flimsy, but you won't touch this everyday. Dimensions: Router: 158 × 101 × 25 mm POE injector:…
This model is compatible with the lego system.
While setting up a new fileserver, I needed a new Host Bus Adapter (HBA) card to connect a bunch of hard drives to. The Adaptec 71605 can be found used for cheap and it is a great alternative to an LSI card. The Adaptec 71605 runs HOT…
I designed this tool to remove the nut from an SFU1605 (or any other 16 mm ball screw). I needed to cut the flange for my SFX80 simulator to fit the slider of the 8080 aluminum profile. The screw was in the way during grinding, and I…
Printed in PETG Suggestion: Print at a 45 degree angle with the screw holes and pegs facing up. Support: Tree/organic Infill: I used 15% but I suggest 25-45% but I have had no issue so far Device clicks in place, I added stand-offs…
OpenMower MPU-6050 IMU Mount for Mowgli Project https://www.amazon.com/gp/product/B01DK83ZYQ/ref=ppx_yo_dt_b_asin_title_
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…
A replacement for missing DCLA-0605 Caliper battery cover. all of the models I have seen just don't fit properly so my OCDness took over and I designed this one.
Eine einfache Box für das WZ3605E Modul und USB und Banana Anschluss Category: Electronics
SFU1605 Version - Extend the Z distance of 50mm (need 50mm longer ballscrews spindles), available for 0-2-3-4mm underplates otherwise through height modualator. Corner completly reinforced and high ability, keep the frame aligned from the…
Mount using LocLine ¾ ball adapter that can attach to a stand /tripod or custom / commercial phone mount using captive bolt or nut (UNC ¼-20, usually 0.9-1.0in long). Model was built using…
ORGANIZZATORE GT605 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
Modified Jimmi's 10" ER605 Rackmount design to suit a 19" full-width rack, with the extra space being used for a 12-port keystone panel. This panel is removable so you can remove or replace keystones without needing to un-rack the entire…
Meshtastic Weather Station Node case compatible with the Acurite 06054 Stevensen Screen Node case with plenty of room for sensors Case snaps into screen securely but can be easily removed All connectors come out the bottom of the screen…
Head of turning wheel for Himoto E18. For both sides. Model in onshape https://cad.onshape.com/documents/4f551c8de95ad38629df7f24 /w/74fb9946dcf328a5f1cc58dd/e/ffa62c3329b945896d0c19c3 Print instructions Category: R/C Vehicles Summary…
Slightly thinner stems on the bearing mount, and shorter housing, closer the to motor. So more of the motor shaft is in the bearing mount
Size of box +- original steam machine, but is height is half. Original sizes view in internet. Installed SteamOS 3.8 convert this device to steamdeck hardware equivalent. Front panel is canonical from original steam machine with magnet's.…
Ruleman con centro de 5mm , 20mm de espesor y 15mm de alto lleva bolillas de acero de 3/16 o 5mm si pueden ser delrin o acetal pom mejor el de la foto es en petg es para bajas revoluciones a menos que lo hagas en acetal POM o nylon 6 ,…
Note: I just uploaded version 2 with thicker mounts for the bearings. Just a quick and dirty stand alone 80mm spool holder with bearings Designed in Catia. Send me a message if you need the source files. Instructions Just print it without…
Our dishwasher disintegrated my original, so I made a new one. I printed mine with "food-safe" PLA. Here's the actual part: https://www.breville.com/us/en/parts-accessories/parts/sp0016078.html
The Leviton 47605 "Vented Premium Hinged Structured Media Door" for their structured media enclosure comes with a hole for an optional lock. When not used, the hole is covered with a black plastic insert. I wanted a white insert so I…
Use the selected printing position to print the case with the least amount of supports. It is also recommended to add a brim to prevent it from peeling off the bed. Material: PETG or ABS
Compared with the ubiquitous HC-SR04 sensors, these modules come with a combined emitter/receiver and an optional UART or I2C-interface. Unfortunately, their minimal range, 25 cm, is much larger. More info on these sensors and an Arduino…
Simply print it in the center of your print-bed and screw on your MPU6050 sensor while the mount is still attached to the bed. Happy calibrating!
This is a replacement handle for the Elektrolux refrigerator (motorhome) Printed with PETG Das ist ein Ersatzgriff für den Kühlschrank Elektrolux (Wohnmobil) Gedruckt mit PETG
LAST AND DEFINITIVE REVISION of my high precision Z system with anti-wobble with SFU1605 I focused to reduce parts quantity, BOM, and make it way more easy to implement; -Easy installation over a Stock 3.1: Same Vcore 3.1 bottom plates…
I suggest printing in ASA and acetone smooth them, the result is stunning
A mount for MPU-6050 on YardForce SA models. Fixed directly on motherboard, so can be mounted on any model with GForce v6 motherboard. I've found my inspiration from mikec model on discord:…
Required Hardware: 4x M3x8mm screws - for the fan 2x M3x12mm screws - thread into the standoffs
לוגו של גדוד 605. ניתן להדפיס במספר צבעים על ידי החלפה של הצבע בכל שכבה רלוונטית (תלוי באיזה עובי שכבה זה מודפס).
19'' rack 1U plate suitable for ER605 router and OC200 hardware controller. Separaded to fit almost every printer
Sturdy bracket designed to fit an ER605 into a DAP 2 HE (or similar) 19" rack cage (i.e. this ), in which it occupies 4 of the 10 segments/units. Expects that M3 machine screws are used to fasten the rear retention clip in place and to…
Items required: 2 M4 nuts. 1 4pin JST connector. Accelerometer MPU6050. 2 M3x4 heat insert. 2 5mm M3 screw.
I accidentally lost a tiny ball while removing the nut from an SFU1605 ball screw — one got stuck between my tool and the thread and jumped out. While searching for a way to reinsert it (and reading a few horror stories), I came up with…
Disclaimer: This design is an independent creation and is not affiliated with, authorized by, or endorsed by the LEGO Group. It is designed to be compatible with standard building blocks. This brickvariation corresponds to the Lego Window…
instal this case on the hollow iron bar or the frame of the solar panel using 3M tape
To build this you will need: 1x WZ3605 Power Supply Module ( https://s.click.aliexpress.com/e/_oppfBi2 ) Bezel: 79mmx43mm 1x Bosch Battery Adaptor (see picture bosch1.png/bosch2.png) (select bosch:…
Modified original WZ3605E case to fit my need by merging it with my other designs such as XT60 mount and Powerpole mount. This design have: XT60, Powerpole, DC barrel jack (5.5x2.1mm) and USB Type-C as input options. Powerpole, DC barrel…
Parametric OpenSCAD design to generate enlarger masks for Durst Sivoneg/Sinoneg/Sirioneg/Unineg carriers. Print two to sandwich your film, or print one if you have a sheet of glass in your carrier.
Working on a dRehmFlight based flight controller, I wanted to mount a MPU6050 IMU onto a protoboard. I put female headers onto the board and plugged in the sensor. Electrically, this is a sound connection. Mechanically, not so much. The…
The Macintosh Quadra 605 is one of the best 68k Macs you can get, a 68040 at 25MHz that is easily clocked up to 33MHz in a slim case. It is a great machine to keep around for the old stuff and compared to the big Quadras they are easy to…
The walls are maybe a bit tall for a spool, but the whole thing works. Requires 5 long segments, a short one (No using a perfect circle causes some fitting issues), and 18 pegs to hold it all together. Use PETG or warping is going to be a…
Printed with PETG, 0.2 mm layer height, 6 perimeters, 50 % cubic infill. Print was oriented as shown in picture to yield best strength. Organic supports were placed to support large overhangs. Assembly requires M4 bolts and self-locking…
I've changed wheels to a bigger radius so my small brushless beast needed the body to be lifted a little. result https://bit.ly/LeoRc I used PetG first and it worked well until it crashed. The rear are still good, but I reprinted the…
I have designed a custom enclosure for the WZ3605E module. The enclosure offers two power input options on the back: a DC 5.5x2.5mm jack or a USB Type-C port. The USB Type-C power delivery is managed by the PDC004 trigger module, ensuring…
https://www.bricklink.com/v2/catalog/catalogitem.page?P=60581pb126 Hang on the wall with this stud: https://www.printables.com/model/1189084-lego-stud-for-hanging-2x2-tile-artwork
