T-Slot 4080 End Cap (Universal Fit, Connector)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal 4080 T-slot end cap and connector. Rounded edges, friction-fit mount — tolerance may need tuning.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 102
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
BOM: Printed with ROSA3D High Speed PLA Signal Violet
This is a universal-fit end cap for 4080 T-slot aluminum extrusion profiles, designed to fit most common 4080 systems (Bosch, Item, Motedis, OpenBuilds, etc.).
It can also be used as a flat connector between two 4040 profiles placed side by side, allowing modular frame expansion or wide base construction.
The design features rounded outer corners that match the natural contour of T-slot extrusions, giving a smooth, professional finish.
It uses a friction-fit connection, staying firmly in place without screws or glue.
Because internal dimensions vary slightly between manufacturers, you may need to adjust tolerances (±0.1–0.2 mm) in your slicer for a perfect fit.
✅ Features
Compatible with most 4080 and 4040 T-slot profiles
Functions as both end cap and side connector
Rounded corners for a polished, OEM-style look
Friction-fit connection, tool-free installation
Tolerance-friendly design — slicer adjustment ±0.1–0.2 mm
Printable flat, no supports required
🧰 Applications
End protection for 4080 frames
Joining two 4040 profiles side by side
Base frame extensions and reinforcements
CNC, printer, or furniture frame builds
🛠 Recommended Print Settings
Material: PETG / ABS for functional use, PLA for light-duty
Layer Height: 0.2 mm
Infill: 50–100 %
Supports: Not required
Orientation: Flat on bed
📏 Compatibility
Works with T-slot 4080 extrusions (Bosch, Item, Motedis, OpenBuilds)
Can connect two 4040 profiles side by side
May require tolerance tuning (±0.1–0.2 mm)
Not recommended for Misumi extrusions